[SR-Users] Transport issue thought

Wilkins, Steve swwilkins at mitre.org
Fri May 18 21:58:16 CEST 2018


I think the reason for the second issue listed below is that Kamailio never receives the ‘200 OK’ from back from the INVITE to Asterisk.  I have noticed that starting sometime after version 14.6, Asterisk puts its Public IP-Address in the Contact field where as in 14.6 it puts it Private IP-Address.

From: sr-users [mailto:sr-users-bounces at lists.kamailio.org] On Behalf Of Wilkins, Steve
Sent: Friday, May 18, 2018 12:15 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: Re: [SR-Users] Transport issue thought

I sent the log but I just wanted to clear up the issue.

This is a WebRTC to WebRTC call

  *   If I use Kamailio 5.2 (UDP) and Asterisk 14.6, the call works perfect!
  *   If I use Kamailio 5.2 (UDP) and Asterisk 15.3, the call connects but disconnects after 30 seconds (Asterisk never received ACK from ‘200 OK’)
  *   If I use Kamailio 5.2 (TCP) and Asterisk x.x the call never connects.


Thank you!



From: sr-users [mailto:sr-users-bounces at lists.kamailio.org] On Behalf Of Federico Cabiddu
Sent: Friday, May 18, 2018 11:02 AM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] Transport issue thought

I don't understand, are you able to send an INVITE to Asterisk via TCP?
Could you share a trace of the calls, masking the sensible information?

Cheers,

Federico

On Fri, May 18, 2018 at 4:56 PM, Wilkins, Steve <swwilkins at mitre.org<mailto:swwilkins at mitre.org>> wrote:
I have tried using t_relay_to_tcp() and t_realy, both with and without setting $ru = $ru + ";transport=tcp" right before the call.
I get different errors and failures depending on which way I make the call.  Which log would you want to see?


  *   I also wanted to point out that if I use UDP, the call connects (it is a WebRTC client to WebRTC client call, and both clients are registered in Kamailio).  The call just gets dropped after 30 seconds because Asterisk 15.3 is not receiving the ACK back to the ‘200 OK’.  Aas stated, TCP does not even connect.


  *   Another very interesting thing is that if I use UDP and Asterisk 14.6, the call works perfect! It stays connected and I have full duplex Audio and Video

Thank you!


From: sr-users [mailto:sr-users-bounces at lists.kamailio.org<mailto:sr-users-bounces at lists.kamailio.org>] On Behalf Of Federico Cabiddu
Sent: Friday, May 18, 2018 8:49 AM

To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] Transport issue thought

Can you print the logs when it tries to send the ACK?
Check also that the ACK ruri contains the same destination port which was used for the INVITE, otherwise a new connection will be created.

Best regards,

Federico

On Fri, May 18, 2018 at 2:31 PM, Wilkins, Steve <swwilkins at mitre.org<mailto:swwilkins at mitre.org>> wrote:
Thank you Alex and Federico,

I verified, and SO_REUSEPORT is defined on my OS.  I am using Kamailio 5.2 and I set ‘tcp_reuse_port=yes;’ and $fs;  this has been to no avail as ‘ACK’s’ are still using the high port number randomly assigned by Kamailio.

Thank you all for sharing your knowledge!


From: sr-users [mailto:sr-users-bounces at lists.kamailio.org<mailto:sr-users-bounces at lists.kamailio.org>] On Behalf Of Federico Cabiddu
Sent: Friday, May 18, 2018 12:57 AM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] Transport issue thought

You are right Alex, Linux kernel didn't support SO_REUSEPORT, which allows a socket to be used as source for a tcp connection while is already bound, until version 3.9.
Kamailio's parameter tcp_reuse_port, if enabled and your OS has support for SO_REUSEPORT (so not only Linux but FreeBSD, OSX and others), allows you to use force_send_socket (or $fs) to send messages from a TCP port kamailio is listening to.

Cheers,

Federico

On Fri, May 18, 2018 at 12:28 AM, Alex Balashov <abalashov at evaristesys.com<mailto:abalashov at evaristesys.com>> wrote:
When an outgoing TCP connection is opened, either a port can be
explicitly bound, or it is auto-assigned by the OS's networking stack. I
believe Kamailio does the latter and does not offer options to constrain
the range. If it does, I'm not aware of any apart from this one:

https://www.kamailio.org/wiki/cookbooks/5.1.x/core#tcp_reuse_port

Not sure if it would help in this case, you'd have to give it a try.

On Thu, May 17, 2018 at 10:21:34PM +0000, Wilkins, Steve wrote:

> It appears that the bottom line of my TCP transport not working is that Kamailio is randomly assigning large port numbers to send the TCP traffic out on.
> I am not able to randomly open high ports for this purpose.  Is there a way to tell Kamailio to only use specific ports for this.  I have tried using
> force_send_socket() with Kamailio' s IP, and the port I want to send out on, but this did not work either.  Does this sound like I am on the right track?
>
> Thank you,
> -
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


--
Alex Balashov | Principal | Evariste Systems LLC

Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20180518/8eefe543/attachment.html>


More information about the sr-users mailing list