[SR-Users] Question on the debug change level command with 5.0.x

[Ginhoux, Patrick]

Hi,

All right, I’ll remove this.

Thanks again for your help.

I can close this ticket.

Cordialement
Patrick GINHOUX

De : sr-users [mailto:sr-users-bounces at lists.sip-router.org] De la part de Federico Cabiddu
Envoyé : jeudi 23 mars 2017 20:46
À : SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users at lists.sip-router.org>
Objet : Re: [SR-Users] Question on the debug change level command with 5.0.x

No, you don't. The debugger module, among other things, allows​ to set the debug level per module.

Regards,

Federico



On 23 Mar 2017 6:31 pm, "Ginhoux, Patrick" <patrick.ginhoux at fr.unisys.com<mailto:patrick.ginhoux at fr.unisys.com>> wrote:
Hi,

Thanks you so much; it works fine as expected.

Now have I to keep the ‘debugger’ module lines in my config ?

Cordialement
Patrick GINHOUX

De : sr-users [mailto:sr-users-bounces at lists.sip-router.org<mailto:sr-users-bounces at lists.sip-router.org>] De la part de Federico Cabiddu
Envoyé : jeudi 23 mars 2017 17:38
À : Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>>
Objet : Re: [SR-Users] Question on the debug change level command with 5.0.x

Hi,
you have to load the cfg_rpc module (http://www.kamailio.org/docs/modules/5.0.x/modules/cfg_rpc.html). Then you can run

kamcmd cfg.set_now_int core debug <LEVEL>.

Regards,

Federico

On Thu, Mar 23, 2017 at 5:24 PM, Ginhoux, Patrick <patrick.ginhoux at fr.unisys.com<mailto:patrick.ginhoux at fr.unisys.com>> wrote:
Hi,

Previously, in my kamailio.cfg 3.3.1, the debug level is set using the ‘debug’ option.
Then with the MI_FIFO module it was simple to change debug level on the flight using the simple command ‘kamctl fifo debug <new value>’.

Moving to kamailio 5.0.x, there is no more MI_FIFO module. In the kamailio.cfg, I still have the ‘debug’ option set; so I’m looking for the command to use to change the debug level.

I look at the debugger module that seems the solution. So I add the following lines in y script:

debug=4

loadmodule "debugger.so"

modparam("debugger", "log_level", 1)
modparam("debugger", "mod_hash_size", 5)
modparam("debugger", "mod_level_mode", 1)

Then I try to use the following commands :

This one retrieves the debug level set by the debug=4) :
[root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level core
4

This one changed the debug level for the core module
[root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level core 2
200 ok

Same commands can be used for each of the module loaded:

[root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level tm
4
[root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level tm 2
200 ok

[root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level dispatcher
4
[root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level dispatcher 2
200 ok

Each command only applies to a specific module.

I don’t find a ‘global’ command that I could use in the same manner as the old ‘kamctl fifo debug’ command.

Is there something I missed in my config ?

Cordialement
Patrick GINHOUX


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20170324/73b16390/attachment.html>