[SR-Users] TR: Failure Mode
Nicolas Breuer
Nicolas.Breuer at belcenter.biz
Wed Jul 12 11:47:56 CEST 2017
Hello Daniel,
The 486 is send by « myself" in the branch failure code.
########################################################## 486 busy
if (t_check_status("486") && $sht(branch=>$ci) != "" ) {
xlog("L_NOTICE", "############################################ Error received from the Carrier ----> Error $var(errorcode)");
sl_send_reply("486","Busy Here");
exit;
}
If I remove that, no "486" is send or put in acc.
So to be clear :
* 486 is send by branch failure
* 408 is send by route failure and the winning reply
Normally I don' t have to code to send a "486" on the branch.
De : Daniel-Constantin Mierla [mailto:miconda at gmail.com]
Envoyé : mercredi 12 juillet 2017 09:23
À : Nicolas Breuer <Nicolas.Breuer at belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Objet : Re: [SR-Users] TR: Failure Mode
Hello,
your latest sip trace shows that 486 is sent out to caller (the acc record from syslog shows that the transaction was completed with that code as well). An ACK follows, but then I see also 408.
Can you check you config and see if there is some other place that can generate the reply, like a send_reply(...) or t_reply(...)?
Cheers,
Daniel
On 10.07.17 12:02, Daniel-Constantin Mierla wrote:
Hello,
the new trace shows a serial forking, with the first branch timing out, but the second branch is getting a 183 response, and that's all. It is not the same scenario you described. I need the full trace, from initial invite to the final response sent back to caller to see what is the winning response code.
Cheers,
Daniel
On 10.07.17 10:10, Nicolas Breuer wrote:
Hello,
Yes I'm sure the second branch is launched from Branch Failure Route.
If you check the timer trace, you can see the second is send 4 seconds later than the first ( I set the tm_inv to 4 seconds )
But in the trace I sent you the "last" invite. The kamailio sent 4 invites.
I will send you the complete trace
De : Daniel-Constantin Mierla [mailto:miconda at gmail.com]
Envoyé : lundi 10 juillet 2017 09:20
À : Nicolas Breuer <Nicolas.Breuer at belcenter.biz><mailto:Nicolas.Breuer at belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org><mailto:sr-users at lists.kamailio.org>
Objet : Re: [SR-Users] TR: Failure Mode
Hello,
looking at the trace, the routing is parallel forking, because the two branches are sent out at the same time, it is no final response to the first branch before the second is sent out.
Are you sure you sent out the second branch from failure route? From the sip trace is doesn't seem so.
Cheers,
Daniel
On 07.07.17 15:38, Nicolas Breuer wrote:
Hello Daniel,
Thanks !
I sent all the information's to your email address
De : Daniel-Constantin Mierla [mailto:miconda at gmail.com]
Envoyé : vendredi 7 juillet 2017 13:21
À : Nicolas Breuer <Nicolas.Breuer at belcenter.biz><mailto:Nicolas.Breuer at belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org><mailto:sr-users at lists.kamailio.org>
Objet : Re: [SR-Users] TR: Failure Mode
Can you get a ngrep trace captured on kamailio server for such situation?
Also, can you paste the failure_route block here along with the log messages from the syslog?
Cheers,
Daniel
On 07.07.17 12:42, Nicolas Breuer wrote:
I think serial because the new branch is only created in case the first is timeout.
De : Daniel-Constantin Mierla [mailto:miconda at gmail.com]
Envoyé : vendredi 7 juillet 2017 12:40
À : Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org><mailto:sr-users at lists.kamailio.org>; Nicolas Breuer <Nicolas.Breuer at belcenter.biz><mailto:Nicolas.Breuer at belcenter.biz>
Objet : Re: [SR-Users] TR: Failure Mode
Hello,
are you doing parallel forking or serial forking?
Cheers,
Daniel
On 07.07.17 12:24, Nicolas Breuer wrote:
Hello,
Some help here is needed
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
I test a call with two branches.
1st branch received a 408 timeout error
2nd branch received a 486 busy.
Normally the failure route should be with the 486.
NOTICE: <script>: Failure route -----2---1--408----
We can see the 408 is the winning reply but I understood from the documentation that if
Failure reply mode is "3" , the winning reply is always the reply from the last branch :)
It's a problem because if the 1st is timeout (because down), the second is OK but callee is busy ; we don't send the right reply to the caller
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - www.asipto.com<http://www.asipto.com>
Kamailio World Conference - www.kamailioworld.com<http://www.kamailioworld.com>
--
Daniel-Constantin Mierla
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - www.asipto.com<http://www.asipto.com>
Kamailio World Conference - www.kamailioworld.com<http://www.kamailioworld.com>
--
Daniel-Constantin Mierla
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - www.asipto.com<http://www.asipto.com>
Kamailio World Conference - www.kamailioworld.com<http://www.kamailioworld.com>
--
Daniel-Constantin Mierla
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - www.asipto.com<http://www.asipto.com>
Kamailio World Conference - www.kamailioworld.com<http://www.kamailioworld.com>
--
Daniel-Constantin Mierla
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - www.asipto.com<http://www.asipto.com>
Kamailio World Conference - www.kamailioworld.com<http://www.kamailioworld.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20170712/9a8acfc4/attachment.html>
More information about the sr-users
mailing list