[SR-Users] How to determine correct port to set in record-route header

[Pranathi Venkatayogi]

I have set that from the beginning, but of no avail. 

advertised_address="63.149.103.72"
listen=udp:MY_IP_ADDR:5060 advertise MY_PUBLICIP_ADDR:5060

-----Original Message-----
From: sr-users [mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Daniel Tryba
Sent: Tuesday, January 24, 2017 7:59 AM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org>
Subject: Re: [SR-Users] How to determine correct port to set in record-route header

On Tue, Jan 24, 2017 at 03:50:24PM +0000, Pranathi Venkatayogi wrote:
>   I am using Kamailio behind NAT, unable to figure how to make it put “public ip” in Record-route header, I am manually inserting the hard-coded header myself as below.
>   However now I am having trouble choosing the right port number in all scenarios.


Take a look at https://www.kamailio.org/wiki/cookbooks/4.4.x/core#listen
and the mentioned set_advertised_address() / set_advertised_port() cfg functions.

To quote the documentation:
 A typical use case for advertise address is when running SIP server  behind a NAT/Firewall, when the local IP address (to be used for bind)  is different than the public IP address (to be used for advertising). 


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users