[SR-Users] Send SIP Info within a dialog using $uac_req(method)="INFO"

Tue Nov 22 18:35:10 CET 2016

Hi Daniel,

Thanks here you go;

[root at POC_ProxyA kamailio]# kamctl mi t_uac_dlg INFO sip:3003 at 193.144.1.112 . udp:10.70.1.136:5060    \"From:sip:1234 at 8.8.8.8"\r\nTo:sip:3003 at 193.144.1.112\r\nContact:sip:daemon at 8.8.8.8\r\n\""
404 Invalid local socket
[root at POC_ProxyA kamailio]# VERBOSE=1 kamctl mi t_uac_dlg INFO sip:3003 at 193.144.1.112 . udp:10.70.1.136:5060    \"From:sip:1234 at 8.8.8.8"\r\nTo:sip:3003 at 193.144.1.112\r\nContact:sip:daemon at 8.8.8.8\r\n\""
database engine 'MYSQL' loaded
Control engine 'FIFO' loaded
entering fifo_cmd t_uac_dlg INFO sip:3003 at 193.144.1.112 . udp:10.70.1.136:5060 "From:sip:1234 at 8.8.8.8
To:sip:3003 at 193.144.1.112
Contact:sip:daemon at 8.8.8.8
"
404 Invalid local socket
FIFO command was:
:t_uac_dlg:kamailio_receiver_23469
INFO
sip:3003 at 193.144.1.112
.
udp:10.70.1.136:5060
"From:sip:1234 at 8.8.8.8
To:sip:3003 at 193.144.1.112
Contact:sip:daemon at 8.8.8.8
"

Thanks

Jon

________________________________
From: Daniel-Constantin Mierla <miconda at gmail.com>
Sent: 22 November 2016 13:10
To: Jonathan Hunter; Kamailio SER - Users Mailing List
Subject: Re: [SR-Users] Send SIP Info within a dialog using $uac_req(method)="INFO"

Hello,

I am trying to figure out why the kamctl is not passing further the params. Can you set VERBOSE=1 in kamctlrc or just run like:

VERBOSE=1 kamctl mi ...

It should print the command sent over the fifo file. Send the output here so I can check it.

Cheers,
Daniel

On 21/11/2016 18:38, Jonathan Hunter wrote:

Hello,

Thanks Daniel, knowing how I should specify all the parameters would be great, just a syntax example, in particular when defining all the sip headers and why their are double quotes/single quotes or what best method is.

Thanks again and sorry for the noise!

Jon

something seems to be strange with interpreting the parameters from command line and forwarding them to kamailio. I will dig a bit into kamctl and come back with some hints.

Cheers,
Daniel

On 21/11/16 13:19, Jonathan Hunter wrote:

Hello.

This is running from command line, not withing the configuration file, so I am testing before I try to add it in.

I have tried with single quotes, but not sure how to enclose the SIP headers and the r/n , can you please advise?

kamctl mi t_uac_dlg INFO sip:3003 at 193.144.1.112 . udp:10.70.1.136:5060    \"From:sip:1234 at 8.8.8.8"\r\nTo:sip:3003 at 193.144.1.112\r\nContact:sip:daemon at 8.8.8.8\r\n\<sip:3003 at 193.144.1.112%5Cr%5CnContact:sip:daemon at 8.8.8.8%5Cr%5Cn%5C>""

As I have tried;

kamctl mi t_uac_dlg 'INFO' 'sip:3003 at 193.144.1.112' '.' 'udp:10.70.1.136:5060'    'From:sip:1234 at 8.8.8.8'r\n'To:sip:3003 at 193.144.1.112'\r\n'Contact:sip:daemon at 8.8.8.8'\r\n\<sip:1234 at 8.8.8.8%27r%5Cn%27To:sip:3003 at 193.144.1.112%27%5Cr%5Cn%27Contact:sip:daemon at 8.8.8.8%27%5Cr%5Cn%5C>'

And still get invalid socket, as it is including all the SIP headers in with the port parameter so I presume I am missing an operator?

/usr/sbin/kamailio[28999]: ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in udp:10.70.1.136:5060From:sip:1234 at 8.8.8.8rnTo:sip:3003 at 193.144.1.112rnContact:sip:daemon at 8.8.8.8rn'

Its including them all as the local socket/port.

Thanks

Jon

________________________________
From: Daniel-Constantin Mierla <miconda at gmail.com><mailto:miconda at gmail.com>
Sent: 21 November 2016 11:29
To: Jonathan Hunter; Kamailio SER - Users Mailing List
Subject: Re: [SR-Users] Send SIP Info within a dialog using $uac_req(method)="INFO"

Hello,

On 20/11/16 16:12, Jonathan Hunter wrote:

Hello,

Ok great thanks Daniel.

One final thing, I cant seem to get kamilio to except the parameter when I add the socket parameter in the kamctl mi t_uac_dlg command.

If I add as below I get 404 invalid local socket;

 kamctl mi t_uac_dlg INFO sip:3003 at 193.144.1.112 . udp:10.70.1.136:5060    \"From:sip:1234 at 8.8.8.8"\r\nTo:sip:3003 at 193.144.1.112\r\nContact:sip:daemon at 8.8.8.8\r\n\<sip:3003 at 193.144.1.112%5Cr%5CnContact:sip:daemon at 8.8.8.8%5Cr%5Cn%5C>""

do you run this command from command line or from kamailio.cfg? I think it's good to be sure it works from command line.

Also, can you try to enclose each parameter in single quotes -- then it's easier for the command line parser to identify the parameters.

Cheers,
Daniel

404 Invalid local socket

As its picking up the socket with the from address included as well, is this again around syntax?

ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in udp:10.70.1.136:5060"From:sip:1234 at 8.8.8.8

As it seems to pick socket up ok;

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <INFO>
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <sip:3003 at 193.144.1.112><sip:3003 at 193.144.1.112>
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <.>
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <udp:10.70.1.136:5060>
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <From:sip:1234 at 8.8.8.8
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:84]: mi_parse_node(): end of fifo input tree
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [fifo_fnc.c:507]: mi_fifo_server(): done parsing the mi tree
Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in udp:10.70.1.136:5060"From:sip:1234 at 8.8.8.8

--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda<http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com

--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20161122/e426e764/attachment.html>