[SR-Users] Send SIP Info within a dialog using $uac_req(method)="INFO"

[Daniel-Constantin Mierla]

Hello,


I am trying to figure out why the kamctl is not passing further the
params. Can you set VERBOSE=1 in kamctlrc or just run like:


VERBOSE=1 kamctl mi ...


It should print the command sent over the fifo file. Send the output
here so I can check it.


Cheers,
Daniel


On 21/11/2016 18:38, Jonathan Hunter wrote:
>
> Hello,
>
>
> Thanks Daniel, knowing how I should specify all the parameters would
> be great, just a syntax example, in particular when defining all the
> sip headers and why their are double quotes/single quotes or what best
> method is.
>
>
> Thanks again and sorry for the noise!
>
>
> Jon
>
>
>
>
>
> something seems to be strange with interpreting the parameters from
> command line and forwarding them to kamailio. I will dig a bit into
> kamctl and come back with some hints.
>
>
> Cheers,
> Daniel
>
>
> On 21/11/16 13:19, Jonathan Hunter wrote:
>>
>> Hello.
>>
>>
>> This is running from command line, not withing the configuration
>> file, so I am testing before I try to add it in.
>>
>>
>> I have tried with single quotes, but not sure how to enclose the SIP
>> headers and the r/n , can you please advise?
>>
>>
>> kamctl mi t_uac_dlg INFO sip:3003 at 193.144.1.112 .
>> udp:10.70.1.136:5060  
>>  \"From:sip:1234 at 8.8.8.8"\r\nTo:sip:3003 at 193.144.1.112\r\nContact:sip:daemon at 8.8.8.8\r\n\""
>>
>>
>> As I have tried;
>>
>>
>> kamctl mi t_uac_dlg 'INFO' 'sip:3003 at 193.144.1.112' '.'
>> 'udp:10.70.1.136:5060'  
>>  'From:sip:1234 at 8.8.8.8'r\n'To:sip:3003 at 193.144.1.112'\r\n'Contact:sip:daemon at 8.8.8.8'\r\n\'
>>
>>
>> And still get invalid socket, as it is including all the SIP headers
>> in with the port parameter so I presume I am missing an operator?
>>
>>
>> /usr/sbin/kamailio[28999]: ERROR: <core> [main.c:1128]:
>> parse_phostport(): too many colons in
>> udp:10.70.1.136:5060From:sip:1234 at 8.8.8.8rnTo:sip:3003 at 193.144.1.112rnContact:sip:daemon at 8.8.8.8rn'
>>
>>
>>
>> Its including them all as the local socket/port.
>>
>> Thanks
>>
>> Jon
>>
>> ------------------------------------------------------------------------
>> *From:* Daniel-Constantin Mierla <miconda at gmail.com>
>> *Sent:* 21 November 2016 11:29
>> *To:* Jonathan Hunter; Kamailio SER - Users Mailing List
>> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using
>> $uac_req(method)="INFO"
>>  
>>
>> Hello,
>>
>>
>> On 20/11/16 16:12, Jonathan Hunter wrote:
>>>
>>> Hello,
>>>
>>>
>>> Ok great thanks Daniel.
>>>
>>>
>>> One final thing, I cant seem to get kamilio to except the parameter
>>> when I add the socket parameter in the kamctl mi t_uac_dlg command.
>>>
>>>
>>> If I add as below I get 404 invalid local socket;
>>>
>>>
>>>  kamctl mi t_uac_dlg INFO sip:3003 at 193.144.1.112 .
>>> udp:10.70.1.136:5060  
>>>  \"From:sip:1234 at 8.8.8.8"\r\nTo:sip:3003 at 193.144.1.112\r\nContact:sip:daemon at 8.8.8.8\r\n\""
>>
>> do you run this command from command line or from kamailio.cfg? I
>> think it's good to be sure it works from command line.
>>
>> Also, can you try to enclose each parameter in single quotes -- then
>> it's easier for the command line parser to identify the parameters.
>>
>> Cheers,
>> Daniel
>>
>>> 404 Invalid local socket
>>>
>>> As its picking up the socket with the from address included as well,
>>> is this again around syntax?
>>>
>>> ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in
>>> udp:10.70.1.136:5060"From:sip:1234 at 8.8.8.8
>>>
>>> As it seems to pick socket up ok;
>>>
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <INFO>
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val
>>> <sip:3003 at 193.144.1.112>
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <.>
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val
>>> <udp:10.70.1.136:5060>
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val
>>> <From:sip:1234 at 8.8.8.8
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [mi_parser.c:84]: mi_parse_node(): end of fifo input tree
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo
>>> [fifo_fnc.c:507]: mi_fifo_server(): done parsing the mi tree
>>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: ERROR: <core>
>>> [main.c:1128]: parse_phostport(): too many colons in
>>> udp:10.70.1.136:5060"From:sip:1234 at 8.8.8.8
>>>
>>>
>
> -- 
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com

-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20161122/d324cb5e/attachment.html>