[SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Fri Jan 29 12:37:34 CET 2016

Hi,

Kamilio logs should be in standard output, so basically in console, keep in
mind that you need to restart kamailio after updating kamailio.cfg.

With kind regards,

2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com>:

> Hello Jurjis,
> I could not reach the Freeswitch DEMO IVR with IP phones which registered
> at Kamailio Server. I think Kamailio can not route the Freeswitch. Because
> phone says "Not Found" when I dialed the "455000".
> And nothing to see except this at fs_cli:
>
> freeswitch at internal> console loglevel 7
> +OK log level 7 [7]
> +OK console log level set to DEBUG
>
> And I added #!define WITH_DEBUG line on Kamailio configuration file. So,
> where does it write logs?
>
> Regards.
>
> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo at gmail.com> wrote:
>
> Hi Baris,
>
> On freeswitch:
> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and
> next command run into it.
> console loglevel 7
>
> Then make a call from one extension to another and to 455000(what should
> be freeswitch demo IVR)
> Then copy all logs, put in file and send as attachment.
>
> On kamailio server somewhere on top add:
>
> #!define WITH_DEBUG
>
> Now all logs will be in console, so for same call copy logs what you get
> in console to separate file, attach and send too.
>
> With kind regards,
>
> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com>
> :
>
>> Hello again,
>> I authanticated with Kamailio and communicate with IP phones succesfully.
>> But depends on this tutorial:
>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
>> When I tried to call "44102" I should go to voicemail box of user 102 but
>> phone says "not found" and I think Kamailio could not route to Freeswitch.
>>
>> BTW, what kind of logs do you want? Level? How can I send these are?
>>
>> Regards.
>>
>> ------------------------------
>> From: baris.sekerciler at outlook.com
>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>> To: sr-users at lists.sip-router.org
>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>
>> Hello Jurjis, thanks for your answer.
>>
>> I did not try default IVR with Freeswitch. But I will try and write.
>>
>> Regards.
>>
>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo at gmail.com> wrote:
>>
>> Hi Baris,
>>
>> Are you able to dial into Freeswitch default IVR(5000 ext)?
>>
>> It will helps if you send logs from Kamailio and freeswitch.
>>
>> With kind regards,
>>
>> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com
>> >:
>>
>> Thanks for answer Phill. Actually I did not apply any different
>> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest
>> stable from Deb Jessie repos)
>> After that, I applied these are:
>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and
>> I adapted to Kamailio 4.3 (at least I tried)
>> There is nothing to different from this link.
>>
>> So, I work on VmWare.
>> Kamailio Server IP:       192.168.2.98
>> FreeSwitch Server IP:   192.168.2.131
>>
>>
>>
>>
>>
>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin at synety.com> wrote:
>>
>> You'll need to share your Kamailio config and some details of your
>> network setup (specifically if NAT is involved).
>>
>>
>> Phil
>>
>> -----Original Message-----
>> From: sr-users [mailto:sr-users-bounces at lists.sip-router.org
>> <sr-users-bounces at lists.sip-router.org>] On Behalf Of Baris Sekerciler
>> Sent: 29 January 2016 08:35
>> To: sr-users at lists.sip-router.org
>> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>
>> Hello everyone. I'm a student and I'm working on project which about SIP
>> communication and PBXs with IP phones.
>>
>> So, my first test results were OK with JITSI. But I think I need
>> Freeswitch for working with IP phones. In a word, I need configure an
>> integration Kamailio and Freeswitch.
>>
>> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local
>> server, after that I installed another Debian 8.3 Jessie (from same image)
>> as my second server and it was going to run Freeswitch on itself.
>> Then I tried to send my communication requests to my Freeswitch server. I
>> made some tests, my Jitsi accounts which are set in Kamailio server were
>> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio
>> wiki and I applied exactly the same thing but I did not work.
>> When I tried to reach another IP phone from my IP phone (I registered
>> them) phone always say "NOT FOUND". I'm sure I did my configuration
>> properly.
>>
>> So, how can I figure it out these things? How can I understand, does
>> Kamailio routes to Freeswitch to my phones?
>>
>> Best regards.
>> Thanks.
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> _______________________________________________ SIP Express Router (SER)
>> and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
>
> --
> Jurijs
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>

-- 
Jurijs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160129/442bdd19/attachment.html>