[SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello Jurjis,
I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000".
And nothing to see except this at fs_cli:

freeswitch at internal> console loglevel 7
+OK log level 7 [7]
+OK console log level set to DEBUG

And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs?

Regards.

> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo at gmail.com> wrote:
> 
> Hi Baris,
> 
> On freeswitch:
> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it.
> console loglevel 7
> 
> Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR)
> Then copy all logs, put in file and send as attachment.
> 
> On kamailio server somewhere on top add: 
> #!define WITH_DEBUG
> 
> Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too.
> 
> With kind regards,
> 
> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com <mailto:baris.sekerciler at outlook.com>>:
> Hello again,
> I authanticated with Kamailio and communicate with IP phones succesfully.
> But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc>
> When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch.
> 
> BTW, what kind of logs do you want? Level? How can I send these are?
> 
> Regards.
> 
> From: baris.sekerciler at outlook.com <mailto:baris.sekerciler at outlook.com>
> Date: Fri, 29 Jan 2016 11:37:54 +0200
> To: sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
> 
> Hello Jurjis, thanks for your answer.
> 
> I did not try default IVR with Freeswitch. But I will try and write.
> 
> Regards.
> 
> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo at gmail.com <mailto:jurij.ivo at gmail.com>> wrote:
> 
> Hi Baris,
> 
> Are you able to dial into Freeswitch default IVR(5000 ext)?
> 
> It will helps if you send logs from Kamailio and freeswitch.
> 
> With kind regards,
> 
> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com <mailto:baris.sekerciler at outlook.com>>:
> Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos)
> After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I adapted to Kamailio 4.3 (at least I tried)
> There is nothing to different from this link.
> 
> So, I work on VmWare.
> Kamailio Server IP:       192.168.2.98
> FreeSwitch Server IP:   192.168.2.131
> 
> 
> 
> 
> 
> On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin at synety.com <mailto:phil.lavin at synety.com>> wrote:
> 
> You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved).
> 
> 
> Phil
> 
> -----Original Message-----
> From: sr-users [mailto:sr-users-bounces at lists.sip-router.org <mailto:sr-users-bounces at lists.sip-router.org>] On Behalf Of Baris Sekerciler
> Sent: 29 January 2016 08:35
> To: sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
> 
> Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones.
> 
> So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch.
> 
> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself.
> Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work.
> When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly.
> 
> So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones?
> 
> Best regards.
> Thanks.
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> 
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> 
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> 
> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> 
> 
> 
> -- 
> Jurijs
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160129/6c471dd9/attachment.html>