[SR-Users] NO RTP when using kamailio on public IP

[Alberto Sagredo]

Hi Ankitt

Kamailio does not care about RTP. Just SIP Signaling

If you want to handle RTP between SIP Clients, depending of they are under
NAT or not, you would need RTPENGINE to proxy RTP packets between them.

Take a look how to install and configure rtpengine inside kamailio
(rtpengine module)

Best Regards

2016-04-22 9:38 GMT+02:00 Ankitt Sharma <akkishrm0825 at gmail.com>:

> hello,
> i've been trying to setup my communication setup , everything works fine
> when i use my kamailio setup within the local network but as soon as i
> assign a public IP to kamailio , there is no  RTP flow between the clients
> i searched over internet and found that rtpengine module should be used
> when using the stup on public network ,and tried configureation(with some
> tweaks) given by https://github.com/caruizdiaz/kamailio-ws
>
> i also observed that the call still flows when the two clients are in same
> network.
>
> please help what should i do!
>
> thanx in advance! :)
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160423/8594dc2a/attachment.html>