[SR-Users] Removing transport=TLS from the contact header
Rizwan Khan
rizkhan at gmail.com
Tue Nov 10 14:11:36 CET 2015
thanks a million. It works :)
Rizwan Khan
On Tue, Nov 10, 2015 at 5:49 PM, Daniel-Constantin Mierla <miconda at gmail.com
> wrote:
> It is about textopsx module -- note the x at the end.
>
> Daniel
>
>
> On 10/11/15 13:37, Rizwan Khan wrote:
>
> Yes.
>
> loadmodule "textops.so"
>
>
> Rizwan Khan
>
>
>
> On Tue, Nov 10, 2015 at 5:32 PM, Daniel-Constantin Mierla <
> <miconda at gmail.com>miconda at gmail.com> wrote:
>
>> Do you have the textopsx module loaded in your config?
>>
>> Daniel
>>
>>
>> On 10/11/15 13:14, Rizwan Khan wrote:
>>
>> if( msg_apply_changes())
>> {
>> xlog("L_INFO:", "INVITE::: [$ct]\n");
>> }
>> subst("/^
>> Contact:(.*);transport=tls(.*)/Contact:\1;transport=udp\2/i");
>> if( msg_apply_changes())
>> {
>>
>> xlog("L_INFO:", "INVITE::: [$ct]\n");
>> }
>>
>>
>> causes:
>> 0(3642) ERROR: <core> [cfg.y:3286]: yyparse(): cfg. parser: failed to
>> find command msg_apply_changes (params 0)
>> 0(3642) : <core> [cfg.y:3426]: yyerror_at(): parse error in config file
>> //etc/kamailio/kamailio.cfg, line 246, column 25: unknown command, missing
>> loadmodule?
>>
>> and again
>>
>> 0(3642) ERROR: <core> [cfg.y:3286]: yyparse(): cfg. parser: failed to
>> find command msg_apply_changes (params 0)
>> 0(3642) : <core> [cfg.y:3426]: yyerror_at(): parse error in config file
>> //etc/kamailio/kamailio.cfg, line 251, column 25: unknown command, missing
>> loadmodule?
>>
>>
>> while if I do this:
>> xlog("L_INFO:", "INVITE::: [$ct]\n");
>> msg_apply_changes();
>> xlog("L_INFO:", "INVITE::: [$ct]\n");
>>
>>
>> I get this:
>> INFO: <script>: INVITE::: [
>> <sip:0514701916 at 10.11.204.81:38614;transport=TLS>]
>> Nov 10 17:13:31 k-pxy-2 /usr/sbin/kamailio[3679]: DEBUG: <core>
>> [re.c:469]: subst_run(): subst_run: matched (243, 59): [Contact:
>> <sip:0514701916 at 10.11.204.81:38614;transport=TLS>#015]
>> Nov 10 17:13:31 k-pxy-2 /usr/sbin/kamailio[3679]: DEBUG: textops
>> [textops.c:695]: subst_f(): textops: replacing at offset 296 [Contact:
>> <sip:0514701916 at 10.11.204.81:38614;transport=TLS>#015] with [Contact:
>> <sip:0514701916 at 10.11.204.81:38614;transport=udp>#015]
>> Nov 10 17:13:31 k-pxy-2 /usr/sbin/kamailio[3679]: INFO: <script>:
>> INVITE::: [<sip:0514701916 at 10.11.204.81:38614;transport=TLS>]
>>
>>
>>
>> Rizwan Khan
>>
>>
>>
>> On Tue, Nov 10, 2015 at 4:41 PM, Daniel-Constantin Mierla <
>> <miconda at gmail.com>miconda at gmail.com> wrote:
>>
>>> Look inside syslog file to see the line where the errors are and
>>> description of the errors.
>>>
>>> Daniel
>>>
>>>
>>> On 10/11/15 12:38, Rizwan Khan wrote:
>>>
>>> Doesn't work. Still give the bad config errors.
>>>
>>> Rizwan Khan
>>>
>>>
>>>
>>> On Tue, Nov 10, 2015 at 4:13 PM, Daniel-Constantin Mierla <
>>> <miconda at gmail.com>miconda at gmail.com> wrote:
>>>
>>>> That is conflicting with other changes to the contact header.
>>>>
>>>> Try to use msg_apply_changes() before (and after) your subst operation
>>>> for changing contact.
>>>>
>>>> Daniel
>>>>
>>>>
>>>> On 10/11/15 12:00, Rizwan Khan wrote:
>>>>
>>>> I have fix_nated_contact() at multiple places :(
>>>>
>>>> Rizwan Khan
>>>>
>>>>
>>>>
>>>> On Tue, Nov 10, 2015 at 3:59 PM, Rizwan Khan < <rizkhan at gmail.com>
>>>> rizkhan at gmail.com> wrote:
>>>>
>>>>> Oh, Yes I do.
>>>>>
>>>>> Rizwan Khan
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Nov 10, 2015 at 3:58 PM, Daniel-Constantin Mierla <
>>>>> <miconda at gmail.com>miconda at gmail.com> wrote:
>>>>>
>>>>>> Do you have set_contact_alias() or fix_nated_contact() in your config
>>>>>> file?
>>>>>>
>>>>>> Cheers,
>>>>>> Daniel
>>>>>>
>>>>>>
>>>>>> On 10/11/15 11:54, Rizwan Khan wrote:
>>>>>>
>>>>>> i am trying it but it doesn't change the string. Do I need to use
>>>>>> msg_apply_changes() ??
>>>>>>
>>>>>> I am trying that but it gives syntax error in the file.
>>>>>>
>>>>>> log("L_INFO:", "INVITE::: [$ct]\n");
>>>>>> subst("/^Contact:(.*);transport=tls(.*)/Contact:\1;transport=udp\2/i
>>>>>> ");
>>>>>> if(msg_apply_changes())
>>>>>> {
>>>>>> xlog("L_INFO:", "INVITE::: [$ct]\n");
>>>>>> }
>>>>>>
>>>>>>
>>>>>> Rizwan Khan
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Nov 10, 2015 at 11:45 AM, Koray Vatansever <
>>>>>> <koray.vatansever at gmail.com>koray.vatansever at gmail.com> wrote:
>>>>>>
>>>>>>> Hi Rizwan,
>>>>>>>
>>>>>>> You can try the following:
>>>>>>>
>>>>>>> subst("/^Contact:(.*);transport=tls(.*)/Contact:\1;transport=udp\2/i
>>>>>>> ");
>>>>>>>
>>>>>>> On the other hand, there should not be any other contact header
>>>>>>> modification in your script; for example set_contact_alias().
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Nov 10, 2015 at 7:28 AM, Rizwan Khan < <rizkhan at gmail.com>
>>>>>>> rizkhan at gmail.com> wrote:
>>>>>>>
>>>>>>>> Guys,
>>>>>>>>
>>>>>>>> Is this a stupid question or this just cannot be done?
>>>>>>>>
>>>>>>>> Any help will be highly appreciated.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Rizwan Khan
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, Nov 9, 2015 at 6:53 PM, Rizwan Khan < <rizkhan at gmail.com>
>>>>>>>> rizkhan at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> I want to remove the transport=TLS from the contact header.
>>>>>>>>>
>>>>>>>>> How can I do that inside Kamailio? The flow is an under:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Client --------> Kamailio -------------> FS
>>>>>>>>> TLS UDP
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Client <-------- Kamailio <------------- FS
>>>>>>>>> TLS UDP
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> FS gets a request on udp but it complains about TLS profile as the
>>>>>>>>> contact header has the transport=TLS. Since its receing traffic on UDP, if
>>>>>>>>> I only get rid of the value from the Contact Header, it would be great.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Rizwan Khan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>>>>> list
>>>>>>>> <sr-users at lists.sip-router.org>sr-users at lists.sip-router.org
>>>>>>>> <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>>>> list
>>>>>>> <sr-users at lists.sip-router.org>sr-users at lists.sip-router.org
>>>>>>> <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users at lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>>>>>> Book: SIP Routing With Kamailio - http://www.asipto.com
>>>>>> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>>> list
>>>>>> <sr-users at lists.sip-router.org>sr-users at lists.sip-router.org
>>>>>> <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> --
>>>> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>>>> Book: SIP Routing With Kamailio - http://www.asipto.com
>>>> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>>>>
>>>>
>>>
>>> --
>>> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>>> Book: SIP Routing With Kamailio - http://www.asipto.com
>>> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>>>
>>>
>>
>> --
>> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>> Book: SIP Routing With Kamailio - http://www.asipto.com
>> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>>
>>
>
> --
> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.com
> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20151110/2ea6f0f1/attachment.html>
More information about the sr-users
mailing list