[SR-Users] Problems with http_query(POST)

[Joao Alves]

I had realized that later on. However for the time being just using this for demo purposes. I’ll lower down the value nonetheless.

Thanks!
From: sr-users [mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Alex Balashov
Sent: quinta-feira, 11 de Junho de 2015 20:38
To: Joao Alves
Subject: Re: [SR-Users] Problems with http_query(POST)

I don't know if you want to do that. That's going to block the given Kamailio SIP receiver process, of which there are a small, fixed number, for up to 30 seconds. http_query() is not implemented in an asynchronous manner under the hood.

--
Alex Balashov | Principal | Evariste Systems LLC
303 Perimeter Center North, Suite 300
Atlanta, GA 30346
United States

Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

Sent from my BlackBerry.
From: Joao Alves
Sent: Thursday, June 11, 2015 15:36
To: miconda at gmail.com<mailto:miconda at gmail.com>; Kamailio (SER) - Users Mailing List
Reply To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Problems with http_query(POST)


Hi Daniel,

Thanks for the quick answer. I’ve just set the “http_query_timeout" to 30 sec as I also need to do a “long pulling”.

Regards,
Joao
From: sr-users [mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla
Sent: quinta-feira, 11 de Junho de 2015 20:22
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Problems with http_query(POST)

Hello,
On 11/06/15 18:13, Joao Alves wrote:
Hi,

I’m finding a problem submitting a HTTP POST using the http_query().  Currently running on kamailio version: 4.1.8 on Debian wheezy.

Normally this command has been worked fine, but since the body of the message increased (the POST data size is around 2000 bytes ) I start to get the following problem:

8(49381) ERROR: <core> [pvapi.c:1338]: pv_printf(): no more space for spec value
8(49381) ERROR: <core> [pvapi.c:1347]: pv_printf(): buffer overflow -- increase the buffer size...
8(49381) ERROR: <core> [sr_module.c:1696]: get_str_fparam(): Could not convert the PV-formated string to str
8(49381) ERROR: utils [functions.c:112]: http_query(): cannot get post value

I’ve searched on how to increase buffer and found some global settings that could be directly, however the problem persist despite having set very high values for those:

pv_buffer_size=32768
tcp_rd_buf_size=32768
maxbuffer=262144

Can someone assist and suggest a solution.

this should be controlled by the the pv_buffer_size. What are the parameters for http_query()?

Cheers,
Daniel



--

Daniel-Constantin Mierla

http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

Book: SIP Routing With Kamailio - http://www.asipto.com
This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at http://www.amdocs.com/email_disclaimer.asp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20150611/e11dc1e3/attachment.html>