[SR-Users] simplest config file possible - not working!

[Google - One]

Sorry. Now fixed. 
I was missing the obvious. 
route section works as expected.
Apologies for the noise.

Regards
Phil

On 1 Oct 2014, at 08:22, Daniel-Constantin Mierla <miconda at gmail.com> wrote:

> Hello,
> 
> can you check if there are log messages in syslog file? have you checked that kamailio is running?
> 
> Daniel
> 
> On 01/10/14 08:45, Google - One wrote:
>> Hi Daniel
>> 
>> I've tried a couple of incantations;
>> 
>> > kamailio -e
>> > kamailio -E
>> and a combination of the two.
>> 
>> That's all.
>> 
>> On 1 Oct 2014, at 07:06, Daniel-Constantin Mierla <miconda at gmail.com> wrote:
>> 
>>> How did you start it?
>>> 
>>> Daniel
>>> 
>>> On 01/10/14 02:27, White, Phil wrote:
>>>> Sorry Guys, I'm very new to this. Taking a dive 'under the hood', to try to learn what is going on, and to see what I can achieve.
>>>> 
>>>> I have 1 sip device ( voip telephone) on the network, constantly firing out REGISTER requests (I have turned off my asterisk server!). That's good.
>>>> I have a terminal window open, running tcpdump. That's good too - I can see what is going on.
>>>> 
>>>> I also have kamailio - giving me absolutely nothing. It's not  complicated config file. In fact it is the simplest I could do. However, it logs nothing - and i am expecting it to.
>>>> 
>>>> Can someone put me out of my misery, and point out the glaring error I have?
>>>> How can I send messages to STDERR while testing?
>>>> 
>>>> Cheers,
>>>> 
>>>> Phil
>>>> 
>>>> ----
>>>> 
>>>> ## WARNING - FOR TESTING & EDUCTION ONLY
>>>> ####### Global Parameters #########
>>>> 
>>>> debug=5
>>>> fork=no
>>>> log_stderror=yes
>>>> port=5060
>>>> 
>>>> ####### Modules Section ########
>>>> 
>>>> # set module path
>>>> mpath="/usr/local/lib/kamailio/modules/"
>>>> loadmodule "sl.so"
>>>> 
>>>> ####### Routing Logic ########
>>>> 
>>>> route{
>>>>  if(method=="REGISTER") {
>>>>   log(1,"this SIP request is a REGISTER message\n");
>>>>   sl_send_reply("404", "No registrar");
>>>>  };
>>>> 
>>>>  if (af!=INET6) {      
>>>>   log(1,"Message received over IPv4 link\n");
>>>>  };
>>>> 
>>>>  if(proto==UDP) {   
>>>>   log(1,"SIP message received over UDP\n");
>>>>  };
>>>> 
>>>>  if(status=="200") {
>>>>   log(1,"this is a 200 OK reply\n");
>>>>  };
>>>> 
>>>>  if(uri==myself) {
>>>>   log(1,"the request is for local processing\n");
>>>>  };
>>>> }
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>> 
>>> -- 
>>> Daniel-Constantin Mierla
>>> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> 
> -- 
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20141002/4371bdd5/attachment.html>