[SR-Users] What is required to enable TLS on non-standard port?

info at vintageelectronics.ca info at vintageelectronics.ca
Sat Feb 15 03:35:21 CET 2014


Testing in the same box for now with the goal to at least get it working 
within one machine.
Do you mean that TLS will not work with the cert/key shipped with kamailio?
I am starting with debug=6 and log to stderr and getting neither output 
to /var/log/messages nor to console.

Thank you

On 02/14/2014 10:21 AM, Corey Edwards wrote:
> On Thu, Feb 13, 2014 at 4:35 PM, <info at vintageelectronics.ca 
> <mailto:info at vintageelectronics.ca>> wrote:
>
>     Corey:
>
>     listen=tls:127.0.0.1:5066 <http://127.0.0.1:5066>
>
>
> Make sure in your config that 127.0.0.1 is replaced by your real IP 
> address,
> or 0.0.0.0, otherwise it will only listen on the local host and won't be
> open over the network.
>
>     port=5066
>
>
> This is unnecessary.
>
>     tls.cfg is the same as installed from rpm. I did not change
>     anything in it. Only defined WITH_TLS.
>
>
> Make sure you have a valid key and certificate file.
>
> Have you tried starting up with debug=4? The debug messages are usually
> pretty good at pointing toward the problem.
>
> Corey
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140214/f6201ce2/attachment.html>


More information about the sr-users mailing list