[SR-Users] What is required to enable TLS on non-standard port?
info at vintageelectronics.ca
info at vintageelectronics.ca
Fri Feb 14 00:35:14 CET 2014
Corey:
listen=tls:127.0.0.1:5066
port=5066
tls.cfg is the same as installed from rpm. I did not change anything in
it. Only defined WITH_TLS.
Thanks!
On 02/13/2014 10:24 AM, Corey Edwards wrote:
> On Wed, Feb 12, 2014 at 8:11 PM, <info at vintageelectronics.ca
> <mailto:info at vintageelectronics.ca>> wrote:
>
> Kamailio running in Fedora 19 box. The client (Jitsi) can only
> connect over TCP.
> If connecting over UDP, the clients connect, but cannot
> send/receive messages.
> Cannot connect over TLS at all. Ultimately I will need to run with
> TLS over 5065 port or higher.
>
> Tried using different listen directives, different port directive,
> but kamailio either does not start, or only listening on one TCP port.
>
>
> Post your listen directives and we'll take a look. Should be something
> like this:
>
> listen=tls:192.0.2.1:5061 <http://192.0.2.1:5061>
>
> You'll also need a tls.cfg. Have you defined one?
>
> enable_tls=yes
> modparam("tls", "config", "/etc/kamailio/tls.cfg")
>
> Sounds like you may have some crazy firewall issues going on, which
> might be
> causing your issues. You might try Sipsak from the local host.
>
> http://developer.berlios.de/projects/sipsak/
>
> Corey
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140213/dfe8bd47/attachment.html>
More information about the sr-users
mailing list