[SR-Users] kamailio dispatcher module stops processing REGISTER
José Seabra
joseseabra4 at gmail.com
Thu Dec 18 16:10:00 CET 2014
Hi Carsten
>- Do you have the Dispatcher Activity detection turned on?
>Can you send me your config, so i can verify a few things?
My dispatcher configuration is:
# ----- dispatcher params -----
modparam("dispatcher", "table_name", "dispatcher")
modparam("dispatcher", "force_dst", 2)
modparam("dispatcher", "flags", 3)
modparam("dispatcher", "db_url", DBURL)
modparam("dispatcher", "dst_avp", "$avp(s:dst)")
modparam("dispatcher", "cnt_avp", "$avp(s:dsp_uri_count)")
modparam("dispatcher", "grp_avp", "$avp(s:dsp_uri_grp)")
modparam("dispatcher", "ds_ping_method", "OPTIONS")
modparam("dispatcher", "ds_ping_from", "sip:sipcheck at 10.0.20.102:5062")
modparam("dispatcher", "ds_ping_interval", 10)
modparam("dispatcher", "ds_probing_threshhold", 3)
modparam("dispatcher", "ds_probing_mode", 2)
>Do you do something like "ds_mark_dst()" in your failure route?
Yes, I'm using ds_mark_dst inside of failure route, but the "REGISTER" is
not entering in failure route in any case, because when "REGISTER" gets the
function ds_select_dst, this function returns false and my kamailio sends a
statless reply to phone and drops the message.
I did a test that was comment "ds_mark_dst("ip");" in failure route and
even with this I still having the same issue.
route[HANDLE_REGISTER]
{
....
t_set_fr(0,2000);
t_on_failure("PRXFAILURE");
if(!ds_select_dst("9", "4"))
{
xlog("L_ERR", "Failed to select proxy - R=$ru ID=$ci\n");
sl_send_reply("503", "No proxy available, try again later");
exit;
}
...
route(RELAY);
}
failure_route[PRXFAILURE] {
if(is_method("REGISTER") && (t_check_status("500") || t_branch_timeout()
|| !t_branch_replied()))
{
$var(cache_user) = $tU + "@" + $td;
$sht(prxcache=>$var(cache_user))=$null;
ds_mark_dst("ip");
if(ds_next_dst())
{
#again set local timeout for reply
t_set_fr(0,2000);
t_on_failure("PRXFAILURE");
xlog("L_INFO", "PRX FAILURE -REGISTER New dest $du ID=$ci\n");
$sht(tmpcache=>$var(cache_user))=$du;
route(RELAY);
exit;
}
else
{
#last available node failed to reply, no other destinations
available
send_reply("404", "No destination");
exit;
}
}
}
BR
José Seabra
2014-12-18 14:43 GMT+00:00 Carsten Bock <carsten at ng-voice.com>:
>
> Hi,
>
> quick questions:
> - Do you have the Dispatcher Activity detection turned on?
> - Do you do something like "ds_mark_dst()" in your failure route?
> - Can you send me your config, so i can verify a few things?
>
> Thanks,
> Carsten
>
>
>
> 2014-12-18 15:14 GMT+01:00 José Seabra <joseseabra4 at gmail.com>:
> > Hello Daniel,
> > Thank you for your reply,
> >
> > Please check out the attachment with kamailio logs in mode debug 3, i
> didn't
> > find any errors, the only thingh that is confusing me is this line:
> > /usr/local/sbin/kamailio[13690]: DEBUG: dispatcher [dispatch.c:1745]:
> > ds_select_dst_limit(): alg hash [0]
> >
> > I don't know if this "ds_select_dst_limit(): alg hash [0]" is related
> with
> > algorithm parameter in function ds_select_dst, but, if yes i cannot
> > understand why it is 0 because I'm using algorithm 4.
> >
> > BR
> > José Seabra
> >
> >
> > 2014-12-18 11:35 GMT+00:00 Daniel-Constantin Mierla <miconda at gmail.com>:
> >>
> >> Hello,
> >>
> >> I asked in the first email - do you get error messages in syslog? If
> not,
> >> then you have to run with debug=3 and look at the log messages to see
> if you
> >> get further hints.
> >>
> >> Cheers,
> >> Daniel
> >>
> >>
> >> On 18/12/14 12:29, José Seabra wrote:
> >>
> >> Hello Daniel,
> >> Do you need more information from my kamailio settup, in order to try
> >> understand why this issue happens?
> >> Thank you
> >> BR
> >> José Seabra
> >>
> >>
> >> 2014-12-16 12:16 GMT+00:00 José Seabra <joseseabra4 at gmail.com>:
> >>>
> >>> Update:
> >>> My last email has the wrong example, the correct code is:
> >>>
> >>> if(!ds_select_dst("9", "4"))
> >>> {
> >>> xlog("L_ERR", "Failed to select proxy - R=$ru ID=$ci\n");
> >>> sl_send_reply("503", "No proxy available, try again later");
> >>> exit;
> >>> }
> >>>
> >>> I'm using algorithm 4.
> >>>
> >>> 2014-12-16 12:14 GMT+00:00 José Seabra <joseseabra4 at gmail.com>:
> >>>>
> >>>> Hello Daniel,
> >>>>
> >>>> Yes it enter inside a condition.
> >>>>
> >>>> my code is:
> >>>>
> >>>> if(!ds_select_dst("9", "0"))
> >>>> {
> >>>> xlog("L_ERR", "Failed to select proxy - R=$ru ID=$ci\n");
> >>>> sl_send_reply("503", "No proxy available, try again later");
> >>>> exit;
> >>>> }
> >>>> and all sip registrers sent receives a sip reply 503 "No proxy
> >>>> available, try again later"
> >>>>
> >>>>
> >>>> BR
> >>>> José Seabra
> >>>>
> >>>> 2014-12-16 12:06 GMT+00:00 Daniel-Constantin Mierla <
> miconda at gmail.com>:
> >>>>>
> >>>>> Hello,
> >>>>>
> >>>>> what do you mean starts returning null?
> >>>>>
> >>>>> Does it enter inside a condition like:
> >>>>>
> >>>>> if(!ds_select_dst(...))
> >>>>>
> >>>>> Are there any error messages in syslog?
> >>>>>
> >>>>> Daniel
> >>>>>
> >>>>>
> >>>>> On 16/12/14 12:51, José Seabra wrote:
> >>>>>
> >>>>> Hello there,
> >>>>>
> >>>>> I'm doing stress testing against kamailio (sip load balancer role)
> >>>>> sending sip registrar, my stress test software is sending 50
> registrations
> >>>>> per second, after 30 seconds and 1000 registers processed the
> function
> >>>>> ds_select_dst (I'm using algorithm 4) returns null for all registers
> sent
> >>>>> from my software, and all registrar sip servers are available and in
> active
> >>>>> mode, if I reduce the software to send 20 registrar's per second,
> the issue
> >>>>> only happens after 60 seconds and kamailio (sip load balancer role)
> process
> >>>>> 4000 registrers, after this, function ds_select_dst starts returning
> null
> >>>>>
> >>>>>
> >>>>> Anyone has any idea why it is happening?
> >>>>> My kamailio version is 4.2
> >>>>>
> >>>>> Best Regards
> >>>>> --
> >>>>> Cumprimentos
> >>>>> José Seabra
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> list
> >>>>> sr-users at lists.sip-router.org
> >>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Daniel-Constantin Mierla
> >>>>> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> list
> >>>>> sr-users at lists.sip-router.org
> >>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>> Cumprimentos
> >>>> José Seabra
> >>>
> >>>
> >>>
> >>> --
> >>> Cumprimentos
> >>> José Seabra
> >>
> >>
> >>
> >> --
> >> Cumprimentos
> >> José Seabra
> >>
> >>
> >> --
> >> Daniel-Constantin Mierla
> >> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> >
> >
> >
> > --
> > Cumprimentos
> > José Seabra
> >
> > _______________________________________________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> > sr-users at lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >
>
>
>
> --
> Carsten Bock
> CEO (Geschäftsführer)
>
> ng-voice GmbH
> Schomburgstr. 80
> D-22767 Hamburg / Germany
>
> http://www.ng-voice.com
> mailto:carsten at ng-voice.com
>
> Office +49 40 5247593-0
> Fax +49 40 5247593-99
>
> Sitz der Gesellschaft: Hamburg
> Registergericht: Amtsgericht Hamburg, HRB 120189
> Geschäftsführer: Carsten Bock
> Ust-ID: DE279344284
>
> Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
> http://www.ng-voice.com/imprint/
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
--
Cumprimentos
José Seabra
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20141218/51c2c0ae/attachment.html>
More information about the sr-users
mailing list