[SR-Users] How to make BLF work

[SamyGo]

Yes, As OEJ mentioned there were no Dialogs created so had to put the
dlg_manage(); in the cfg and now in kamcmd the dlg.list command displays
call data.
How can I add presence stuff now.
Vitaliy, please explain further how can I add the PUA component.

Thanks,
Sammy





On Thu, May 30, 2013 at 6:17 PM, Olle E. Johansson <oej at edvina.net> wrote:

>
> 30 maj 2013 kl. 13:07 skrev SamyGo <govoiper at gmail.com>:
>
> Hi again,
>
> I doubt SCA module will work for me but let me get this a shot tonight and
> get back with a sipgrep trace. Meanwhile I was just thinking if the 'skype
> like service' blog at Asipto<http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hour>might work straight away. I really don;t see any difference in my PRESENCE
> route but maybe I've missed anything.
>
> Let me get back with more working on this.
>
> Start with making sure that the Dialog module works as expected for you.
> Check with kamcmd that you have active dialogs when you have active calls.
> When that works, start with adding presence.
>
> Cheers,
> /O
>
>
> Thanks for the reply.
>
> Sammy Go.
>
>
>
> On Wed, May 29, 2013 at 1:35 PM, Daniel-Constantin Mierla <
> miconda at gmail.com> wrote:
>
>>  Hello,
>>
>> just to say that SCA module might be an alternative, not sure it works
>> for blf, could be only for bla/sla, but worth checking the email.
>>
>> Also, if you post ngrep output (sip traffic as sip), could be easier to
>> review the traces from a device that is not yet capable of installing
>> tcpdump/ngrep/etc ... tools, like tablets, smartphones ... increasing your
>> chance to get more people to an answer.
>>
>> Cheers,
>> Daniel
>>
>>
>> On 5/28/13 11:41 PM, SamyGo wrote:
>>
>> Yeah, I'm getting your point.
>>
>> So now, here are my loaded modules.
>>
>>  #!ifdef WITH_PRESENCE
>> loadmodule "presence.so"
>> loadmodule "presence_xml.so"
>> loadmodule "presence_dialoginfo.so"
>> loadmodule "pua.so"
>>  loadmodule "pua_dialoginfo.so"
>> loadmodule "pua_usrloc.so"
>> #!endif
>>
>>  And of course:
>>
>>  loadmodule "dialog.so"
>>
>>  Attached are the relevant sip traces.
>>
>>
>> On Wed, May 29, 2013 at 2:32 AM, SamyGo <govoiper at gmail.com> wrote:
>>
>>> Yeah, I'm getting your point.
>>>
>>> So now, here are my loaded modules.
>>>
>>>  #!ifdef WITH_PRESENCE
>>> loadmodule "presence.so"
>>> loadmodule "presence_xml.so"
>>> loadmodule "presence_dialoginfo.so"
>>> loadmodule "pua.so"
>>>  loadmodule "pua_dialoginfo.so"
>>> loadmodule "pua_usrloc.so"
>>> #!endif
>>>
>>>  And of course:
>>>
>>>  loadmodule "dialog.so"
>>>
>>>  Attached are the relevant sip traces.
>>>
>>>
>>>
>>>
>>> On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov <
>>> vitalik.voip at gmail.com> wrote:
>>>
>>>>  You didn't receive any NOTIFY requests because you didn't have a PUA
>>>> client. rfc3903 describes what a PUA client is.
>>>>
>>>> To make BLF work you can try to use the next modules:
>>>> 1. dialog - to enable dialog awareness
>>>> 2. pua + pua_dialoginfo - to enable a PUA client based on active
>>>> dialogs information provided by the "dialog" module
>>>> 3. presence + presence_dialoginfo - to handle subscriptions and send
>>>> notifications to phones
>>>>
>>>>   Hi list,
>>>>
>>>>  I've been trying to make my Yealink phone to give BLF indications but
>>>> I haven't been able to achieve this successfully yet so I need some expert
>>>> advise here.
>>>>  My Yealink phone, as soon as it registers to Asterisk, gives me BLF
>>>> lights. The same phone registering to Kamailio sends SUBSCRIBE and nothing
>>>> happens.
>>>>
>>>>  The Presence Handling is enabled in configurations and yet no
>>>> dialog-info+xml NOTIFY is received.
>>>>
>>>>  Please help.
>>>>
>>>>  Best Regards,
>>>> Sammy Go.
>>>>
>>>>
>>>>
>>>>  _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users at lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users at lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> --
>> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>> Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
>>   * http://asipto.com/u/katu *
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20130531/b8f0c295/attachment-0001.html>