[SR-Users] kamailio debug send messages

[Konstantin M.]

Hi Anca,

I've tested your patch and I don't think it's working.
At least I was noticed that a logic is going to 'skip' label on 183 sdp:
        /* check modules response_f functions */
        for (r=0; r<mod_response_cbk_no; r++)
                if (mod_response_cbks[r](msg)==0) goto skip;


2012/5/15 Anca Vamanu <anca.vamanu at 1and1.ro>

> **
> Hi Konstantin,
>
>
> I have attached the patch that allows calling onsend route also for
> replies. After the 3.3 release is done, I will commit it also upstream.
>
> Regards,
> Anca
>
>
>
> On 05/14/2012 09:00 PM, Konstantin M. wrote:
>
> Hi Marius,
>
> My opinion that a replies should be routed to onsend_route after
> onreply_route in order unless they are dropped in onreply_route.
> It's by a common sense I think. All the traffic that is being
> sent/replied/forwarded and so on (in a short, all outgoing traffic) should
> trigger some callback.
> A good point to use onsend_route for replies/forwardings/etc too I think.
>
> There is a good reason (at least to me) which I need to see/parse them: my
> outgoing provider has a highly unwanted feature to us: forked calls.
> I have some program which is analyzing a remote leg connection state (no
> answer/busy/reorder, etc...) and this app is also analyzing
> all RTP which are sending within SDP on 180/181/183 messages. Let's say
> that Telco can send a multiple 183 SDP with a different IP/audio ports
> (c=/m=)
> and our application (which hasn't support for forking calls) is receive a
> multiple rtp streams to the same rtp port.
> Sure thing I did a proper logic to drop >1 of 180/181/183 sdp with a
> different contact info but I need to capture all the outgoing traffic
> that is routing to outbound from kamailio.
> I have to use wireshark just to see which replies are being set instead of
> just log them into a syslog/file.
>
> Could you please share with me that patch ?
>
> Thanks,
>
>
>
>
>
> 2012/5/14 Marius Zbihlei <marius.zbihlei at 1and1.ro>
>
>> Hello,
>>
>> Normally, onsend_route is not triggered for replies, only for messages.
>> If there are some good reasons behind it, I don't know, as we have a simple
>> patch that enables this (we are reviewing it before pushing it to
>> upstream). Of course, no changes to the messages/replies are permitted ...
>>
>> So again, is there a cause why onsend_route is not triggered for replies
>> atm?
>>
>>  --
>> Zbihlei Marius
>>
>> Head of
>> Linux Development Services Romania
>>
>> 1&1 Internet Development srl    Tel KA: 754-9152
>> Str Mircea Eliade 18            Tel RO: +40-31-223-9152
>> Sect 1, Bucuresti               mailto: marius.zbihlei at 1and1.ro
>> 71295, Romania
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120515/af380ebf/attachment-0001.htm>