[SR-Users] get server parameters from DB when kamailio starts
Daniel-Constantin Mierla
miconda at gmail.com
Mon Feb 13 16:34:45 CET 2012
Hello,
On 2/10/12 2:32 PM, Uri Shacked wrote:
> thanks,
> it is good see there is a wayto start with -A... and it might make it
> easier a little (cause i use the define as the group the server
> belongs to).
> but, it doesn't help me fully in my case.
> i would like to have a generic start, and generic cfg file (it is much
> easier when you need to maintain).
> the best thing i would like to do is something like that:
> let say i have "route on start" or "get data from DB on start"...
> then, i set something like:
> get "myself"
> from list of kamailio servers"
> and set my group to "the value set on me"
> it seems to me something very usefull, when you use 2 and more
> kamailio at different sites, and still want a generic code and functions.
> if i was a programer... i might try to write some module :-)
you can load values from a database table via htable module and then use
them to build the logic -- htable values are accessible via $sht(...).
Cheers,
Daniel
> thanks anyway,
> Uri
>
> On Fri, Feb 10, 2012 at 2:51 PM, Daniel-Constantin Mierla
> <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>
> Hello,
>
> you can use defines to control the order (the values of NP
> servers), here is an example of defining NP servers (to str value,
> for sake of explanation):
>
> #!ifdef SRV1
> #!define NPSRV1 "abc"
> #!define NPSRV2 "xyz"
> #!else
> #!define NPSRV2 "abc"
> #!define NPSRV1 "xyz"
> #!endif
>
> and start kamailio with parameter '-A SRV1' for the first instance.
>
> Cheers,
> Daniel
>
>
>
> On 2/10/12 6:28 AM, Uri Shacked wrote:
>> Hi again...
>> (i do find myself ask many questions these days.... :-))
>>
>> well, now here is one more:
>>
>> i have 2 kamailio servers that i use in 2 locations. both use the
>> same
>> tables and DBURL.
>> each of my server turns to a number portability (NP) server at
>> its same
>> location.
>> for example, if server 1 has the call, it will turn to NP server
>> 1 with the
>> query, and if the query fails, it will then turn to NP server 2.
>> the kamailio server 2 does the same. but, turns to NP server 2
>> first and if
>> it fails, to NP server 1.
>>
>> once this is understood....
>>
>> here is my issue - i want to have 1 generic cfg file for my 2
>> servers.
>> today, i use the same cfg file, but in server 1 i set it in the
>> cfg to its
>> group, and on server 2 the same but a different group....
>>
>> i tried to understand how do i get each server to "pull" its
>> group from the
>> DB. something like "what is my group when my IP is X.Y.Z.Q ?
>> i raed the cfg_db module but didn't understand how to set it on
>> my cfg file
>> and on the DB.
>>
>> what is the best way to do what i want?
>> hope i was clear....
>>
>> BR,
>> thanks to all the guys that help me so far, i appriciate it a lot!
>> Uri
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/>
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120213/f284d91a/attachment-0001.htm>
More information about the sr-users
mailing list