[SR-Users] Network Architecture Question

[Rob Watkin]

Ah yes, I think you're correct that a B2BUA fits my needs. I'll look at
sippy too!

Thanks
Rob


On 3 April 2012 15:18, Stefan Sayer <stefan.sayer at googlemail.com> wrote:

>
> o Rob Watkin on 04/03/2012 03:20 PM:
>
>  Your remark about digest authentication explains why I have had
>> difficulties. I was considering merging SIP interconnects with digest
>> authenticated SIP trunks in a single gateway. I would prefer not to
>> use a B2BUA as a PSTN gateway in order to avoid carrier media where
>> possible. I suspect it might be better to separate out any digest
>>
>
> a B2BUA doesn't necessarily need to be in the media path.
>
> if SEMS SBC may fit your needs: you do not set enable_rtprelay in the SBC
> profile, you can set SEMS SBC to be signaling-only. you can enable SIP auth
> in the profile. you can use syslog CDR to write CDRs to syslog and then
> post-process from there; alternatively you can program your own CDR
> generation on top of call control interface (or, for 1.4, prepaid
> interface), adapt the rest module and use some web app server or similar.
> additionally you get stuff like session timers, codec filter, header
> manipulation etc.
>
> Stefan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120403/3f70724c/attachment.htm>