[SR-Users] Kamailio NOTIFY

[Klaus Darilion]

Do you see PUBLISH requests with Event: dialog?

Note: those will be sent by pua_dialoginfo module to Kamailio itslef,
thus will be sent on the loopback interface. You should see them with
"ngrep -d any port 5060"

klaus

Am 09.02.2011 14:16, schrieb Spinov Evgeniy:
> Hello all.
> 
> I'm having problem with sending NOTIFY packet for event dialog.
> 
> The problem is, that all NOTIFY packets sent with this event is empty.
> ( Content-length: 0 ) and in fact, not passing actual status to the
> phone. In my case this is SPA962.
> 
> NOTIFY packets for event presence are sent fine and status is changing
> normally.
> 
> The same phone, works fine with Asterisk. Asterisk is sending NOTIFY
> with non-zero content and changing status for the subscriber as well.
> 
> I've turned on pua module to send PUBLISH requests at Kamailio, it's
> filling DB table with subscription, everything runs fine and NOTIFY
> packets are coming to subscribed phone, but they are empty.
> 
> I also have presence_dialoginfo module on and pua_dialoginfo module on.
> I've tried on Kamailio 3.0.3 and 3.1.1. Content always empty.
> 
> There is no sense of pasting here packet dumps, cause everything is like
> should be: 
> 
> (UAC) SUBSCRIBE, event: presence ---> K
> K ---> 202 OK
> (SPA) SUBSCRIBE, event: dialog ---> K
> K ---> 202 OK
> PUBLISH, event: presence ---> K
> K ---> 200 OK
> NOTIFY, event: presence, Content-Length: XXX ---> UAC
> NOTIFY, event: dialog, Content-Length: 0 ---> SPA962
> 
> As result, softphone changes status and hardphone ( SPA962 ) - no. May
> be it's cause of PUBLISH event value? 
> 
> Please advise.
> 
> 
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users