[OpenSER-Users] OpenSER sending 483: Too many Hops

Marcio mrgalhan at gmail.com
Thu Mar 20 19:18:15 CET 2008


Hi,

If anybody can take a look openser.cfg below. I`m working vmware
(enviroments virtual)...Whenever I try a "register" a client I get 483: Too
many Hops....as if he had a loop (config file) but I am unable to find the
problem...

I use OpenSER 1.3-notls, client softphone: twincle or xlite...

OpenSER - 192.168.0.10
Client - 192.168.0.25

Bind9/named.conf(SRV, A): spo.voip.br


Does anyone know how to fix this ?

Any hints.....??

thx...



*OpenSER File:*
**

####### Global Parameters #########

alias="vmw02-srv.spo.voip.br"

debug=6

log_stderror=no

log_facility=LOG_LOCAL0

log_name="Openser"

fork=yes

children=8

tcp_children=4

group="openser"

user="openser"

/* uncomment the following lines to enable debugging */

#debug=6

#fork=no

#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */

disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of

not available destinations (default disabled) */

#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns

lookup failures (default disabled) */

#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases

based on revers DNS on IPs (default on) */

#auto_aliases=no

/* uncomment the following lines to enable TLS support (default off) */

#disable_tls = no

#listen = tls:your_IP:5061

#tls_verify_server = 1

#tls_verify_client = 1

#tls_require_client_certificate = 0

#tls_method = TLSv1

#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"

#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"

#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"



port=5060

/* uncomment and configure the following line if you want openser to

bind on a specific interface/port/proto (default bind on all available) */

#listen=udp:192.168.1.2:5060

listen=udp:192.168.0.10:5060



####### Modules Section ########

#set module path

mpath="/usr/local/lib/openser/modules/"

/* uncomment next line for MySQL DB support */

loadmodule "mysql.so"

loadmodule "sl.so"

loadmodule "tm.so"

loadmodule "rr.so"

loadmodule "maxfwd.so"

modparam("maxfwd", "max_limit", 256)

loadmodule "usrloc.so"

loadmodule "registrar.so"

loadmodule "textops.so"

loadmodule "mi_fifo.so"

loadmodule "uri_db.so"

loadmodule "uri.so"

loadmodule "xlog.so"

loadmodule "acc.so"

loadmodule "avpops.so"

/* uncomment next lines for MySQL based authentication support

NOTE: a DB (like mysql) module must be also loaded */

loadmodule "auth.so"

loadmodule "auth_db.so"

/* uncomment next line for aliases support

NOTE: a DB (like mysql) module must be also loaded */

loadmodule "alias_db.so"

/* uncomment next line for multi-domain support

NOTE: a DB (like mysql) module must be also loaded

NOTE: be sure and enable multi-domain support in all used modules

(see "multi-module params" section ) */

loadmodule "domain.so"

/* uncomment the next two lines for presence server support

NOTE: a DB (like mysql) module must be also loaded */

#loadmodule "presence.so"

#loadmodule "presence_xml.so"



# ----------------- setting module-specific parameters ---------------



# ----- mi_fifo params -----

modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")



# ----- rr params -----

# add value to ;lr param to cope with most of the UAs

modparam("rr", "enable_full_lr", 1)

# do not append from tag to the RR (no need for this script)

#modparam("rr", "append_fromtag", 0)



# ----- rr params -----

#modparam("registrar", "method_filtering", 1)

/* uncomment the next line to disable parallel forking via location */

# modparam("registrar", "append_branches", 0)

/* uncomment the next line not to allow more than 10 contacts per AOR */

#modparam("registrar", "max_contacts", 10)



# ----- uri_db params -----

/* by default we disable the DB support in the module as we do not need it

in this configuration */

modparam("uri_db", "use_uri_table", 0)

modparam("uri_db", "db_url", "")



# ----- acc params -----

/* what sepcial events should be accounted ? */

modparam("acc", "early_media", 1)

modparam("acc", "report_ack", 1)

modparam("acc", "report_cancels", 1)

/* by default ww do not adjust the direct of the sequential requests.

if you enable this parameter, be sure the enable "append_fromtag"

in "rr" module */

modparam("acc", "detect_direction", 0)

/* account triggers (flags) */

modparam("acc", "failed_transaction_flag", 3)

modparam("acc", "log_flag", 1)

modparam("acc", "log_missed_flag", 2)

/* uncomment the following lines to enable DB accounting also */

modparam("acc", "db_flag", 1)

modparam("acc", "db_missed_flag", 2)



# ----- usrloc params -----

#modparam("usrloc", "db_mode", 0)

/* uncomment the following lines if you want to enable DB persistency

for location entries */

modparam("usrloc", "db_mode", 2)

modparam("usrloc", "db_url", "mysql://openser:openserrw@192.168.0.10
/openser")

modparam("usrloc", "user_column", "username")

modparam("usrloc", "domain_column", "domain")

modparam("usrloc", "contact_column", "contact")

modparam("usrloc", "expires_column", "expires")

modparam("usrloc", "q_column", "q")

modparam("usrloc", "callid_column", "callid")

modparam("usrloc", "cseq_column", "cseq")

modparam("usrloc", "methods_column", "methods")

modparam("usrloc", "flags_column", "flags")

modparam("usrloc", "user_agent_column", "user_agent")

modparam("usrloc", "received_column", "received")

modparam("usrloc", "socket_column", "socket")

modparam("usrloc", "use_domain", 0)

modparam("usrloc", "desc_time_order", 0)

modparam("usrloc", "timer_interval", 60)

modparam("usrloc", "matching_mode", 0)

modparam("usrloc", "cseq_delay", 20)

# ----- auth_db params -----

/* uncomment the following lines if you want to enable the DB based

authentication */

#modparam("auth_db", "calculate_ha1", yes)

#modparam("auth_db", "password_column", "password")

modparam("auth_db", "db_url", "mysql://openser:openserrw@192.168.0.10
/openser")

#modparam("auth_db", "load_credentials", "")



# ----- alias_db params -----

/* uncomment the following lines if you want to enable the DB based

aliases */

modparam("alias_db", "db_url", "mysql://openser:openserrw@192.168.0.10
/openser")



# ----- domain params -----

/* uncomment the following lines to enable multi-domain detection

support */

modparam("domain", "db_url", "mysql://openser:openserrw@192.168.0.10
/openser")

modparam("domain", "db_mode", 1) # Use caching

# ----- multi-module params -----

/* uncomment the following line if you want to enable multi-domain support

in the modules (dafault off) */

modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)



# ----- presence params -----

/* uncomment the following lines if you want to enable presence */

#modparam("presence|presence_xml", "db_url",

# "mysql://openser:openserrw@192.168.1.3/openser_1_3")

#modparam("presence_xml", "force_active", 1)

#modparam("presence", "server_address", "sip:192.168.1.2:5060")



####### Routing Logic ########



# main request routing logic

route{

if (!mf_process_maxfwd_header("10")) {

sl_send_reply("483","Too Many Hops");

exit;

}

if (has_totag()) {

# sequential request withing a dialog should

# take the path determined by record-routing

if (loose_route()) {

if (is_method("BYE")) {

setflag(1); # do accouting ...

setflag(3); # ... even if the transaction fails

}

route(1);

} else {

sl_send_reply("404","Not here");

}

exit;

}

#initial requests

# CANCEL processing

if (is_method("CANCEL"))

{

if (t_check_trans())

t_relay();

exit;

}

t_check_trans();

# DESCOMENTEI O BLOCO IF{}

# authenticate if from local subscriber (uncomment to enable auth)

if (!(method=="REGISTER") && from_uri==myself)

{

if (!proxy_authorize("", "subscriber")) {

proxy_challenge("", "0");

exit;

}

if (!check_from()) {

sl_send_reply("403","Forbidden auth ID");

exit;

}

consume_credentials();

# caller authenticated

}

# record routing

if (!is_method("REGISTER|MESSAGE"))

record_route();

# account only INVITEs

if (is_method("INVITE")) {

setflag(1); # do accouting

}

if (!uri==myself)

/* replace with following line if multi-domain support is used */

##if (!is_uri_host_local())

{

append_hf("P-hint: outbound\r\n");

# if you have some interdomain connections via TLS

##if($rd=="tls_domain1.net") {

## t_relay("tls:domain1.net");

## exit;

##} else if($rd=="tls_domain2.net") {

## t_relay("tls:domain2.net");

## exit;

##}

route(1);

}

# requests for my domain

/* uncomment this if you want to enable presence server

and comment the next 'if' block

NOTE: uncomment also the definition of route[2] from below */

##if( is_method("PUBLISH|SUBSCRIBE"))

## route(2);

if (is_method("PUBLISH"))

{

sl_send_reply("503", "Service Unavailable");

exit;

}

if (is_method("REGISTER"))

{

# ACRESCENTEI O IP ADDR - MRG

# authenticate the REGISTER requests (uncomment to enable auth)

#if (!www_authorize("vmw02-srv", "subscriber"))

#{

# www_challenge("vmw02-srv", "0");

# exit;

#}

#

#if (!check_to())

##{

## sl_send_reply("403","Forbidden auth ID");

## exit;

##}

if (!save("location"))

sl_reply_error();

exit;

}

if ($rU==NULL) {

# request with no Username in RURI

sl_send_reply("484","Address Incomplete");

exit;

}

# apply DB based aliases (uncomment to enable)

alias_db_lookup("dbaliases");

if (!lookup("location")) {

switch ($retcode) {

case -1:

case -3:

t_newtran();

t_reply("404", "Not Found");

exit;

case -2:

sl_send_reply("405", "Method Not Allowed");

exit;

}

}

# when routing via usrloc, log the missed calls also

setflag(2);

route(1);

}



route[1] {

# for INVITEs enable some additional helper routes

if (is_method("INVITE")) {

t_on_branch("2");

t_on_reply("2");

t_on_failure("1");

}

if (!t_relay()) {

sl_reply_error();

};

exit;

}



# Presence route

/* uncomment the whole following route for enabling presence

NOTE: do not forget to enable the call of this route from the main

route */

##route[2]

##{

## if (!t_newtran())

## {

## sl_reply_error();

## exit;

## };

##

## if(is_method("PUBLISH"))

## {

## handle_publish();

## t_release();

## }

## else

## if( is_method("SUBSCRIBE"))

## {

## handle_subscribe();

## t_release();

## }

##

## exit;

##}



branch_route[2] {

xlog("new branch at $ru\n");

}



onreply_route[2] {

xlog("incoming reply\n");

}



failure_route[1] {

if (t_was_cancelled()) {

exit;

}

# uncomment the following lines if you want to block client

# redirect based on 3xx replies.

##if (t_check_status("3[0-9][0-9]")) {

##t_reply("404","Not found");

## exit;

##}

# uncomment the following lines if you want to redirect the failed

# calls to a different new destination

##if (t_check_status("486|408")) {

## sethostport("192.168.2.100:5060");

## append_branch();

## # do not set the missed call flag again

## t_relay();

##}

}



*Ngrep -d eth1 -qt -W byline port 5060*

root at vmw02-srv:~# ngrep -d eth1 -qt -W byline port 5060

interface: eth1 (192.168.0.0/255.255.255.0)

filter: (ip or ip6) and ( port 5060 )

U 2008/03/20 13:57:31.763060 192.168.0.25:5060 -> 192.168.0.10:5060

REGISTER sip:spo.voip.br SIP/2.0.

Via: SIP/2.0/UDP 192.168.0.25;rport;branch=z9hG4bKignjupsg.

Max-Forwards: 70.

To: "vmwcli03" <sip:vmwcli03 at spo.voip.br>.

From: "vmwcli03" <sip:vmwcli03 at spo.voip.br>;tag=dcoan.

Call-ID: iswtwciijecswfp at 192.168.0.25.

CSeq: 883 REGISTER.

Contact: <sip:vmwcli03 at 192.168.0.25>;expires=3600.

Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO.

User-Agent: Twinkle/1.0.

Content-Length: 0.

.



U 2008/03/20 13:57:32.333159 192.168.0.25:5060 -> 192.168.0.10:5060

REGISTER sip:spo.voip.br SIP/2.0.

Via: SIP/2.0/UDP 192.168.0.25;rport;branch=z9hG4bKignjupsg.

Max-Forwards: 70.

To: "vmwcli03" <sip:vmwcli03 at spo.voip.br>.

From: "vmwcli03" <sip:vmwcli03 at spo.voip.br>;tag=dcoan.

Call-ID: iswtwciijecswfp at 192.168.0.25.

CSeq: 883 REGISTER.

Contact: <sip:vmwcli03 at 192.168.0.25>;expires=3600.

Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO.

User-Agent: Twinkle/1.0.

Content-Length: 0.

.



U 2008/03/20 13:57:33.321952 192.168.0.25:5060 -> 192.168.0.10:5060

REGISTER sip:spo.voip.br SIP/2.0.

Via: SIP/2.0/UDP 192.168.0.25;rport;branch=z9hG4bKignjupsg.

Max-Forwards: 70.

To: "vmwcli03" <sip:vmwcli03 at spo.voip.br>.

From: "vmwcli03" <sip:vmwcli03 at spo.voip.br>;tag=dcoan.

Call-ID: iswtwciijecswfp at 192.168.0.25.

CSeq: 883 REGISTER.

Contact: <sip:vmwcli03 at 192.168.0.25>;expires=3600.

Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO.

User-Agent: Twinkle/1.0.

Content-Length: 0.

.



*U 2008/03/20 13:57:35.309584 192.168.0.25:5060 -> 192.168.0.10:5060*

*REGISTER sip:spo.voip.br SIP/2.0.*

Via: SIP/2.0/UDP 192.168.0.25;rport;branch=z9hG4bKignjupsg.

Max-Forwards: 70.

To: "vmwcli03" <sip:vmwcli03 at spo.voip.br>.

From: "vmwcli03" <sip:vmwcli03 at spo.voip.br>;tag=dcoan.

Call-ID: iswtwciijecswfp at 192.168.0.25.

CSeq: 883 REGISTER.

Contact: <sip:vmwcli03 at 192.168.0.25>;expires=3600.

Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO.

User-Agent: Twinkle/1.0.

Content-Length: 0.

.



*U 2008/03/20 13:57:37.026703 192.168.0.10:5060 -> 192.168.0.25:5060*

*SIP/2.0 483 Too Many Hops.*

Via: SIP/2.0/UDP 192.168.0.25;rport=5060;branch=z9hG4bKignjupsg.

To: "vmwcli03" <sip:vmwcli03 at spo.voip.br>;tag=
1333af5435552d3677a0ca954c3a6e9f.6889.

From: "vmwcli03" <sip:vmwcli03 at spo.voip.br>;tag=dcoan.

Call-ID: iswtwciijecswfp at 192.168.0.25.

CSeq: 883 REGISTER.

Server: OpenSER (1.3.0-notls (i386/linux)).

Content-Length: 0.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20080320/d0a2565b/attachment.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: captureNGREP.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20080320/d0a2565b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: openser.cfg
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20080320/d0a2565b/attachment.asc>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cliTwincle.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20080320/d0a2565b/attachment-0001.txt>


More information about the sr-users mailing list