[Serusers] Fwd: Unix Socket Problem

[frq ser]

 Hi Stefan

Thanks a lot for your prompt response. I can hear the announcement
now. Previously my audio setup was not correct.

Best Regards,
Frq

  On Wed, Apr 2, 2008 at 12:11 PM, Stefan Sayer <stefan.sayer at iptego.com>
wrote:

> Hello,
>
> frq ser wrote:
>
> > Hi
> >
> > Thanks for your reply Stefan and my apologies for coming back to this
> > issue after such a long time. As you suggested, I included SDP headers in my
> > Sipsak INVITE msg and the SEMS seems to like it. I am trying to play the
> > announcement using a INVITE message to SEMS at :5070. The SEMS sends a 200
> > OK message, but no audio was being played. In the log, I got these messages
> > (just including the important messages)...
> >
> > ..
> > (17358) DEBUG: execute (AmInterfaceHandler.cpp:172): Request OK:
> > dispatch it!  (17358) DEBUG: getAnnounceFile (Announcement.cpp:79): trying
> > '/usr/local/lib/sems/audio/192.168.3.208/200.wav <
> > http://192.168.3.208/200.wav>'  (17358) DEBUG: getAnnounceFile
> > (Announcement.cpp:84): trying '/usr/local/lib/sems/audio/200.wav'
> > ..
> > ..
> > (17358) DEBUG: getCompatiblePayloads (AmSdp.cpp:348): using global
> > address: 192.168.3.208 <http://192.168.3.208/>       (17358) DEBUG:
> > negotiate (AmSession.cpp:262): remote party doesn't support telephone events
> >
> > Seeing the last line, I then used an Xlite softphone (instead of sipsak)
> > to contact SEMS. Again, the call gets established for about 10 seconds and
> > then just gets disconnected and no audio can be heard. Nothing in
> >
> To me the logs look normal. seems like it plays the announcement and then
> hangs up, as it should. the default_en.wav (or 200.wav, if you've copied it
> there), is only a few seconds long. are you sure that audio is setup
> correctly (volume etc), i.e. does the xlite test call work? if you call e.g.
> sip:conference at iptel.org <sip%3Aconference at iptel.org>, do you hear
> something?
>
> can you run tcpdump -i any or run wireshark to see whether packets flow
> between SEMS and xlite?
>
> you could also PM me a wireshark dump so i could have a look at what's
> going on.
>
> Stefan
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20080402/a777ae36/attachment.htm>