[Serusers] SER + Linksys SPA942 + Call transfer

[Klaus Fleischmann]

The NOTIFY is always sent from the UA, which received the REFER. SER 
only relays it. Did you check this?

Cheers
Klaus

roayu wrote:
> Hi there!
> 
> After SPA942(transfer agent) sent REFER to SER, SER does not send a NOTIFY
> to SPA942(transfer agent). What's causes this? Can anyone tell me.
> 
> Thanks.
> 
> Cheers,
> Roa Yu :)
> 
> -----Original Message-----
> From: serusers-bounces at lists.iptel.org
> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of roayu
> Sent: Thursday, October 11, 2007 4:34 PM
> To: Atle Samuelsen
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer
> 
> 
> Hi Atle,
> 
> Let me make my scenario clear on you.
> 
> I have 2 softphone and 1 IP phone(SPA942). I would like to call from
> Softphone A to SPA942, then use SPA942 transfer the call to Softphone B.
> But, when I do so, the connection still remained on between SPA942 and
> Softphone B. 
> 
> I managed to get Softphone A onHold and the SPA942 managed to call to
> Softphone B. Once I press on the 'xfer' button after calling Softphone B, A
> still onHold and no SIP signal to unHold A and to terminate B.
> 
> If I would like to configure the ser.cfg file, which part that I need to
> configure? And how do I do that?
> 
> Thanks.
> 
> Cheers,
> Roa Yu 
> 
> 
> -----Original Message-----
> From: Atle Samuelsen [mailto:clona at cyberhouse.no] 
> Sent: Thursday, October 11, 2007 3:19 PM
> To: roayu
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer
> 
> 
> Hi Roa,i
> * roayu <roayu at ctisys.net> [071011 04:01]:
>> Hi, there!
>>
>> I have some questions and help.
>> 1)	I would like to know can call transfer being done when the
>> connection  is P2P? When I tried to use relay (mediaproxy) to do the call
>> transfer, it's able to transfer the call to the other party whereas when
> the
>> condition is P2P, it just can't pass the correct signal. 
> 
> I'm proberbly only tierd (9:15 am here) but P2P? Can you provide the
> signalling and ser.cfg so we can understand what you are trying to
> establish? 
> 
> I personally think you are trying to do a call transfer from one ua to a
> other, where the original call went true mediaproxy, but you do not want
> the "new" transferd call to go true it.
> 
>> 2)	Can SER support SPA942 ? Or is there some other settings that I need
>> to configure on SER ?
> 
> SPA942, SPA962, SPA2102, yea.. all Linksys SPA products work like a
> charm with SER (Who has a 942 as his primary phone these days)
> 
> 
> Best Regards
> 
> ATle
>> Thanks.
>>
>> Cheers,
>> Roa Yu
>>
>> _______________________________________________
>> Serusers mailing list
>> Serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> 
>