AW: [OpenSER-Users] MSILO: dump stored messages

[Daniel-Constantin Mierla]

Hello,

can you test with latest trunk version. I added a constraint to order by 
auto incremented index. Let me know if works ok.

Cheers,
Daniel


On 10/04/07 15:11, Cesar Troncoso wrote:
> Hi,
>
> thanks for reply my email. I made the following test: I sent five different messages:
>
> one
> two
> three
> four
> five
>
> and I traced the SIP traffic passing through the server. They were stored in the DB in the correct sequence. So far so good. Now comes the problem, I saw the IM going out from my SIP Server and the sequence was wrong:
>
> three
> five
> two
> four
> one
>
> And exactly in that way appeared the IM in my client when the user went online. 
>
> In my opinion the IM were not properly sent when they went out from OpenSER
>
> Cheers,
>
> Cesar
>
> -----Ursprüngliche Nachricht-----
> Von: Daniel-Constantin Mierla [mailto:daniel at voice-system.ro] 
> Gesendet: Donnerstag, 04. Oktober 2007 13:28
> An: Cesar Troncoso
> Cc: users at openser.org
> Betreff: Re: [OpenSER-Users] MSILO: dump stored messages
>
> Hello,
>
> they should be sent in order of receiving -- however I will double 
> check. Because they are sent in a very short time frame, maybe the get 
> in a different order to the user, because of network transmission. Can 
> you watch the sip traffic sent by proxy?
>
> Cheers,
> Daniel
>
>
> On 10/04/07 13:39, Cesar Troncoso wrote:
>   
>> Hello,
>>
>>  
>>
>> I have a problem by using the MSILO Module. The messages stored in the 
>> DB (table SILO) are not sent in the right sequence. Therefore when the 
>> user goes online again and receives the messages previously stored in 
>> the DB, he is not able to understand them. Any Ideas or suggestions 
>> how to deal this problem?
>>
>>  
>>
>> Thanks,
>>
>>  
>>
>> Cesar
>>
>>  
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/users
>>   
>>     
>
>