[OpenSER-Users] uac_restore_from problem

[Bogdan-Andrei Iancu]

Hi Zoltán,

could you post the sip traffic (inbound and outbound) ? in what route 
are you using the uac_restore_from() function?

anyhow, my advise is to upgrade to 1.2 version as in ~ 2 weeks the 1.3 
will be release and 1.1 will become unsupported version.

regards,
bogdan

Zoltán Kovács wrote:
> I found out that the uac_replace_from() function has a weird behaviour 
> on my system. The same result occurs for all the three 
> modparam("uac","from_restore_mode",...)  settings ("auto", "none", 
> "manual").
>
> 1) I cannot change the display or the URI part in FROM header. 
> Whatever I do I'll get no change.
> 2) If a inbound hidden call is coming from an inbound trunk (#31#...) 
> then uac_replace_from("XXX", "sip:YYY") unhides the display and the 
> URI in FROM header --- however the displayed phone number will be 
> independent from XXX or YYY, it will be the original phone number of 
> the caller (XXX or YYY may be omitted, too). The text "sip:" cannot be 
> omitted.
>
> I don't really have an idea what is going on here. Could you please 
> help? I'm still using openser-1.1.0.
>
> Thank you in advance. Best regards, Zoltan
>
> 2007/11/27, Zoltán Kovács < kovzol at gmail.com <mailto:kovzol at gmail.com>>:
>
>     Dear Colleagues,
>
>     first of all, thank you for the great software which is a very
>     nice and convenient way to build up a stable VoIP telephone
>     system! We already have a working system based on OpenSER and
>     Asterisk.
>
>     After many experiments I finally raise this question to you
>     because I cannot figure out the solution. The problem described on
>     http://www.openser.org/pipermail/users/2006-January/002747.html
>     <http://www.openser.org/pipermail/users/2006-January/002747.html>
>     seems to be very similar to mine.
>
>     I am using openser-1.1.0-9etch1. I tried to replace the FROM
>     variable as follows:
>
>     loadmodule "uac.so"
>     modparam("uac","from_restore_mode","auto")
>     ...
>     route
>     {
>     ...
>     avp_write("$fU", "$avp(s:display)");
>     avp_write("$fU", "$avp(s:dispuri)");
>     avp_subst("$avp(s:display)", "/^36(.*)/06\1/");
>     avp_subst("$avp(s:dispuri)", "/^36(.*)/sip:06\1 at datanet.hu/");
>     uac_replace_from("$avp(s:display)", "$avp(s:dispuri)");
>     ...
>     }
>
>     Unfortunately nothing seems to happen: no change is made on
>     several VoIP telephones, including X-Lite as well. loose_route()
>     and record_route() were also used in my configuration. Could you
>     please help me what I am missing here? If needed, I can also send
>     a full config file.
>
>     Thank you in advance,
>     Zoltan Kovacs
>     sysadmin
>
>
>
>
> -- 
> matek.hu <http://matek.hu> --- mert matekból érettségizni mindenkinek 
> kell...
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at lists.openser.org
> http://lists.openser.org/cgi-bin/mailman/listinfo/users
>