[Serusers] Frustrating error - please help

samuel samu60 at gmail.com
Thu May 24 18:27:16 CEST 2007 

Maybe you've got another software bind to the address SER is trying to bind
to(softphone,asterisk,...). Can you check whether the port 5060 is in use?
what's the output of the next comand?
#lsof -i:5060


samuel.

2007/5/24, Mahatma Sarasvati <gnoahhb at yahoo.com>:
>
> Also a good idea. Still no effect. This installation was working great for
> a while. Is it possible that some other software I've installed is causing
> the problem?
>
> This is 2.0.0 rc2 from CVS.
>
> M
>
> ----- Original Message ----
> From: Andrey Kuprianov <andrey.kouprianov at gmail.com>
> To: "serusers at iptel.org" <serusers at iptel.org>
> Sent: Thursday, May 24, 2007 8:23:14 AM
> Subject: Re: [Serusers] Frustrating error - please help
>
> Maybe just try setting fork=yes ?...
>
> On 5/24/07, Mahatma Sarasvati <gnoahhb at yahoo.com> wrote:
> >
> > A good hint, but no. I'm using the standard version 1.4 ser.cfg. I've
> only
> > added my 10.10.10.41 ip address. The "fork=no" command is commented out.
> >
> > Is there something else that would cause ser to start in non-forking
> mode?
> >
> > Thanks,
> > M
> >
> >
> > ----- Original Message ----
> > From: samuel <samu60 at gmail.com>
> > To: Mahatma Sarasvati <gnoahhb at yahoo.com>
> > Cc: serusers at iptel.org
> > Sent: Thursday, May 24, 2007 12:40:41 AM
> > Subject: Re: [Serusers] Frustrating error - please help
> >
> > Are you starting SER in non-forking mode? It looks like SER is not
> binding
> > to the 10.10.10.41 IP, only to the local IP (127.0.0.1) and that's why
> you
> > see in the logs that it's not able to send to a "standard" IP address:
> > WARNING: xl_mod_init: more IP 10.10.10.41 not used
> > CRITICAL: invalid sendtoparameters one possible reason is the server is
> > bound to localhost and attempts to send to the net
> >
> > Case you need to use 2 interfaces, I would recommend using mhomed=yes
> (don't
> > recall the exact syntax right now..).
> >
> > Hope it helps,
> > Samuel.
> >
> > 2007/5/24, Mahatma Sarasvati <gnoahhb at yahoo.com>:
> > > Hi All,
> > >
> > > This ser installation was working fine and I can't figure out why its
> not
> > working now.
> > > I'm getting an error (see last log line) every time I attempt a call
> to
> > local users. Calling out to PSTN works great. ngrep reveals that SER is
> not
> > sending any messages to the callee location.
> > >
> > > There are 2 registered local users, one registered twice.
> > >
> > > I have no idea what is going on. I'm using an unmodified version 1.4
> > ser.cfg file on CentOS 5.
> > >
> > > I suspect some server configuration error? ? ? ?
> > >
> > >
> > > Thanks,
> > > M
> > >
> > >
> > >
> > > Here are the logs.
> > >
> > >
> > > May 23 16:03:38 vx1 ser: init_tcp: using epoll_lt as the io watch
> method
> > (auto detected)
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: Maxfwd module-
> initializing
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: WARNING: xl_mod_init:
> more
> > IP 10.10.10.41 not used
> > > May 23 16:03:38 vx1 last message repeated 8 times
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: AVPops - initializing
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: DEB: IP address of
> RTPPROXY
> > is /var/run/rtpproxy.sock
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: xlog null is
> "<null>"
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init:
> SO_RCVBUF
> > is initially 109568
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init:
> SO_RCVBUF
> > is finally 262142
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init:
> SO_RCVBUF
> > is initially 109568
> > > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init:
> SO_RCVBUF
> > is finally 262142
> > > .
> > > .
> > > .
> > > .
> > > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: rtpp_test: RTP proxy
> > <unix:/var/run/rtpproxy.sock> found, support for it re-enabled
> > > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: ERROR: udp_send:
> > sendto(sock,0xb62048f4,1773,0, 10.10.100.103:5060,16): Invalid
> argument(22)
> > >
> > > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: CRITICAL: invalid
> > sendtoparameters one possible reason is the server is bound to localhost
> > > and attempts to send to the net
> > > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: msg_send: ERROR:
> udp_send
> > failed
> > > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: ERROR: t_send_branch:
> > sending request on branch 0 failed
> > > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: ERROR: sl_reply_error
> used:
> > Unfortunately error on sending to next hop occurred (477/SL)
> > >
> > >
> > >
> > > When I start SER I get this response:
> > >
> > > [root at vx1 ~]# service ser restart
> > > Stopping ser:
> >  [  OK  ]
> > > Starting ser: Listening on
> > >              udp: 127.0.0.1 [127.0.0.1]:5060
> > >              udp: 10.10.10.41 [10.10.10.41]:5060
> > >              tcp: 127.0.0.1 [127.0.0.1]:5060
> > >              tcp: 10.10.10.41 [10.10.10.41]:5060
> > > Aliases:
> > >              tcp: vx1:5060
> > >              tcp: vx1.velocity11.com:5060
> > >              tcp: localhost:5060
> > >              tcp: localhost.localdomain:5060
> > >              udp: vx1:5060
> > >              udp: vx1.velocity11.com:5060
> > >              udp: localhost:5060
> > >              udp: localhost.localdomain:5060
> > >
> > >
> >  [  OK  ]
> > > [root at vx1 ~]#
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> ____________________________________________________________________________________Ready
> > for the edge of your seat?
> > > Check out tonight's top picks on Yahoo! TV.
> > > http://tv.yahoo.com/
> > > _______________________________________________
> > > Serusers mailing list
> > > Serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> >
> >
> >
> > ________________________________
> > Sucker-punch spam with award-winning protection.
> > Try the free Yahoo! Mail Beta.
> > _______________________________________________
> > Serusers mailing list
> > Serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>
>
>
> ____________________________________________________________________________________Get
> the free Yahoo! toolbar and rest assured with the added security of spyware
> protection.
> http://new.toolbar.yahoo.com/toolbar/features/norton/index.php
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070524/74f35b55/attachment.htm>

More information about the sr-users mailing list