[Serusers] Frustrating error - please help

Thu May 24 18:05:57 CEST 2007

Also a good idea. Still no effect. This installation was working great for a while. Is it possible that some other software I've installed is causing the problem?

This is 2.0.0 rc2 from CVS.

M

----- Original Message ----
From: Andrey Kuprianov <andrey.kouprianov at gmail.com>
To: "serusers at iptel.org" <serusers at iptel.org>
Sent: Thursday, May 24, 2007 8:23:14 AM
Subject: Re: [Serusers] Frustrating error - please help

Maybe just try setting fork=yes ?...

On 5/24/07, Mahatma Sarasvati <gnoahhb at yahoo.com> wrote:
>
> A good hint, but no. I'm using the standard version 1.4 ser.cfg. I've only
> added my 10.10.10.41 ip address. The "fork=no" command is commented out.
>
> Is there something else that would cause ser to start in non-forking mode?
>
> Thanks,
> M
>
>
> ----- Original Message ----
> From: samuel <samu60 at gmail.com>
> To: Mahatma Sarasvati <gnoahhb at yahoo.com>
> Cc: serusers at iptel.org
> Sent: Thursday, May 24, 2007 12:40:41 AM
> Subject: Re: [Serusers] Frustrating error - please help
>
> Are you starting SER in non-forking mode? It looks like SER is not binding
> to the 10.10.10.41 IP, only to the local IP (127.0.0.1) and that's why you
> see in the logs that it's not able to send to a "standard" IP address:
> WARNING: xl_mod_init: more IP 10.10.10.41 not used
> CRITICAL: invalid sendtoparameters one possible reason is the server is
> bound to localhost and attempts to send to the net
>
> Case you need to use 2 interfaces, I would recommend using mhomed=yes (don't
> recall the exact syntax right now..).
>
> Hope it helps,
> Samuel.
>
> 2007/5/24, Mahatma Sarasvati <gnoahhb at yahoo.com>:
> > Hi All,
> >
> > This ser installation was working fine and I can't figure out why its not
> working now.
> > I'm getting an error (see last log line) every time I attempt a call to
> local users. Calling out to PSTN works great. ngrep reveals that SER is not
> sending any messages to the callee location.
> >
> > There are 2 registered local users, one registered twice.
> >
> > I have no idea what is going on. I'm using an unmodified version 1.4
> ser.cfg file on CentOS 5.
> >
> > I suspect some server configuration error? ? ? ?
> >
> >
> > Thanks,
> > M
> >
> >
> >
> > Here are the logs.
> >
> >
> > May 23 16:03:38 vx1 ser: init_tcp: using epoll_lt as the io watch method
> (auto detected)
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: Maxfwd module- initializing
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: WARNING: xl_mod_init: more
> IP 10.10.10.41 not used
> > May 23 16:03:38 vx1 last message repeated 8 times
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: AVPops - initializing
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: DEB: IP address of RTPPROXY
> is /var/run/rtpproxy.sock
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: xlog null is "<null>"
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init: SO_RCVBUF
> is initially 109568
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init: SO_RCVBUF
> is finally 262142
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init: SO_RCVBUF
> is initially 109568
> > May 23 16:03:38 vx1 /usr/local/sbin/ser[1692]: INFO: udp_init: SO_RCVBUF
> is finally 262142
> > .
> > .
> > .
> > .
> > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: rtpp_test: RTP proxy
> <unix:/var/run/rtpproxy.sock> found, support for it re-enabled
> > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: ERROR: udp_send:
> sendto(sock,0xb62048f4,1773,0, 10.10.100.103:5060,16): Invalid argument(22)
> >
> > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: CRITICAL: invalid
> sendtoparameters one possible reason is the server is bound to localhost
> > and attempts to send to the net
> > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: msg_send: ERROR: udp_send
> failed
> > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: ERROR: t_send_branch:
> sending request on branch 0 failed
> > May 23 16:09:15 vx1 /usr/local/sbin/ser[1781]: ERROR: sl_reply_error used:
> Unfortunately error on sending to next hop occurred (477/SL)
> >
> >
> >
> > When I start SER I get this response:
> >
> > [root at vx1 ~]# service ser restart
> > Stopping ser:
>  [  OK  ]
> > Starting ser: Listening on
> >              udp: 127.0.0.1 [127.0.0.1]:5060
> >              udp: 10.10.10.41 [10.10.10.41]:5060
> >              tcp: 127.0.0.1 [127.0.0.1]:5060
> >              tcp: 10.10.10.41 [10.10.10.41]:5060
> > Aliases:
> >              tcp: vx1:5060
> >              tcp: vx1.velocity11.com:5060
> >              tcp: localhost:5060
> >              tcp: localhost.localdomain:5060
> >              udp: vx1:5060
> >              udp: vx1.velocity11.com:5060
> >              udp: localhost:5060
> >              udp: localhost.localdomain:5060
> >
> >
>  [  OK  ]
> > [root at vx1 ~]#
> >
> >
> >
> >
> >
> >
> >
> >
> >
> ____________________________________________________________________________________Ready
> for the edge of your seat?
> > Check out tonight's top picks on Yahoo! TV.
> > http://tv.yahoo.com/
> > _______________________________________________
> > Serusers mailing list
> > Serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
>
>
>
> ________________________________
> Sucker-punch spam with award-winning protection.
> Try the free Yahoo! Mail Beta.
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
_______________________________________________
Serusers mailing list
Serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers

____________________________________________________________________________________Get the free Yahoo! toolbar and rest assured with the added security of spyware protection.
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php