[Serusers] msilo module problem

Andrei Pelinescu-Onciul andrei at iptel.org
Wed Mar 28 20:22:37 CEST 2007


On Mar 28, 2007 at 12:48, POON Ben <Ben.Poon at alcatel-lucent.com> wrote:
> Hi Andrei,
> 
> Thanks for the reply, I did the gdb command, turns out the pa module is
> giving me problems, although all I did was loadmodule it...  Once I took
> it off, I no longer get the core dump message.
> 
> Now I get this:
> 
> ************************************************************************
> ****
> bash# ser -D -E
>  0(3047) parse error (166,17-18): unknown command, missing loadmodule?
> 
>  0(3047) parse error (196,22-23): unknown command, missing loadmodule?
> 
>  0(3047) parse error (243,20-21): unknown command, missing loadmodule?
> 
> ERROR: bad config file (3 errors)
> ************************************************************************
> *****
> 
> I am using ser 0.9.6 on solaris 10.  I hope that's not the problem...  I
> am still unable to use the msilo module.  Still stuck at the same lines
> with the m_dump and m_store.
> 
> I tried using the sample config exactly (except changes to domains and
> paths), and I think these are the problems lines:

It seems the configuration is for ser 2.0.
To make it work just replace m_dump("") with m_dump(),
 m_store("0", "") with m_store("0") and m_store("1", "") with
 m_store("1").


Andrei


> 
> ************************************************************************
> ******
>  0(3119) find_export: <m_dump> not found
>  0(3119) find_export: <m_dump> not found
>  0(3119) parse error (72,26-27): unknown command, missing loadmodule?
> 
>  0(3119) find_export: <m_store> not found
>  0(3119) find_export: <m_store> not found
>  0(3119) parse error (101,31-32): unknown command, missing loadmodule?
> 
>  0(3119) find_export: <m_store> not found
>  0(3119) find_export: <m_store> not found
>  0(3119) parse error (137,23-24): unknown command, missing loadmodule?
> ************************************************************************
> ******
> 
> Can my module simply be bad?  Do I need to do anything special when I
> compile it for installation?  The other modules I load are working ok so
> I don't think I corrupted anything...
> 
> Thank you for your help, it's very much appreciated,
> Ben
> 
> -----Original Message-----
> From: Andrei Pelinescu-Onciul [mailto:andrei at iptel.org] 
> Sent: Wednesday, March 28, 2007 12:59 PM
> To: POON Ben
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] msilo module problem
> 
> On Mar 28, 2007 at 09:00, POON Ben <Ben.Poon at alcatel-lucent.com> wrote:
> > Hi all,
> >  
> > I am trying to use the msilo module.  On the website it says the 
> > dependency is only a db module and the tm module.  Both of which are 
> > included in my ser.cfg file before the loadmodule for the msilo
> module.
> > Can someone please help me find out what is wrong?  Thanks.
> >  
> > However, when I try to start ser, it gives me this:
> >  
> > **********************************************************************
> > **
> > ******************
> > bash# ser -D -E
> >  0(29857) parse error (166,17-18): unknown command, missing
> loadmodule?
> >  
> >  0(29857) parse error (196,22-23): unknown command, missing
> loadmodule?
> >  
> >  0(29857) parse error (243,20-21): unknown command, missing
> loadmodule?
> >  
> > ERROR: bad config file (3 errors)
> > Segmentation Fault (core dumped)
> > **********************************************************************
> > **
> > *******************
> >  
> > I've checked the lines 166, 196, and 243, they all correspond to lines
> 
> > where I use m_dump and m_store.  The config file is basically a copy 
> > of the one provided at http://www.iptel.org/ser/doc/modules/msilo
> >  
> > Are there other dependencies not listed on the module page?  I don't 
> > need SEMS or anything like that do I?
> 
> What ser version are you using? I've tried the msilo example cfg with
> ser 2.0 (Ottendorf) and it works for me. The only problem was an extra
> '{' on the "if (uri==myself)" line.
> What's even more srange is that you get a coredump. Could you do a
> backtrace on it? (gdb ser core   and then type bt).
> 
> 
> Andrei



More information about the sr-users mailing list