[Serusers] SIP SER

[karim basraoui]

Well, first of all a SER server does not generate messages it only
interprets the messages it receives. so it can not generate INVITE messages.
so if you want to call several clients from one client, this one has to
initiate the call by sending an INVITE to SER.

When receiving the INVITE message, SER will forward it to the callees. i did
not try this yet, but i think that you can do this with the method :
"forward" as follows:

if(method == INVITE) {
         forward("callee1_IP_address","callee1_port");
         forward("callee2_IP_address","callee2_port");
         forward("callee3_IP_address","callee3_port");
         #and so on ...
}

try this for example... and let me know if it works or not.

ps: (personnally i think it won't work :p)

2007/3/3, Goh, Tee-Yong <gohty at m1.com.sg>:
>
>  Hi Karim,
>
> Yes you are right.
> Please advice.
>
> Thank you.
>
> Regards,
> Howard
>
> -----Original Message-----
> *From:* karim basraoui [mailto:basraouik at gmail.com]
> *Sent:* Saturday, March 03, 2007 8:01 PM
> *To:* Goh, Tee-Yong
> *Cc:* serusers at lists.iptel.org
> *Subject:* Re: [Serusers] SIP SER
>
> So if i understand, when a clint registers, SER will automatically send
> invites to the other clients and make connections with them?
>
> 2007/3/3, Goh, Tee-Yong < gohty at m1.com.sg>:
> >
> >  Dear Karim,
> >
> > Thank you for your reply.
> >
> > Yes you are right. I have having difficulty searching for this for past
> > 2 months.
> >
> > Yes. Here is what i want. Once i receive the REGISTER messages, my SER
> > will send out "INVITE" message to my other clients. This is what i am
> > intended to do. However, i could not search for the right coding inside the
> > ser-0.9.6.
> >
> > Please advice and apologies if any inconvenience caused for you.
> >
> > Thanks.
> >
> > Regards,
> > Howard
> >
> > -----Original Message-----
> > *From:* karim basraoui [mailto:basraouik at gmail.com]
> > *Sent:* Saturday, March 03, 2007 7:18 PM
> > *To:* Goh, Tee-Yong
> > *Subject:* Re: [Serusers] SIP SER
> >
> > Hi,
> >
> > Do you want to make changes on SER behaviour when it receives REGISTER
> > messages. If it's the case you can make a condition in the "ser.cfg"
> > file, in the bloc "route{ ... }". for example:
> > route {
> >           if (method == "REGISTER")
> >           { #what you want to do};
> >         }
> >
> >
> > 2007/3/3, Goh, Tee-Yong <gohty at m1.com.sg >:
> > >
> > >  Hi,
> > >
> > > May i know from the SER-0.9.6, where can i look for and make changes
> > > for the SER when receiving "REGISTER" message and responsing " 200 OK" back
> > > to the corresponding node or clients?
> > >
> > > Would appreciate your assistance and advice as soon as possible as i
> > > have difficultly locating the coding. Please advice where i can find the
> > > script to edit the above mentioned messages.
> > >
> > > Apologies for the inconvenience caused.
> > >
> > > Thank you.
> > >
> > > Regards,
> > > Howard
> > >
> > > ------------------------------
> > > This email (including any attachment) is subject to the following
> > > disclaimer: http://m1.com.sg/M1/misc/disclaimer
> > > ------------------------------
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > Serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >
> >
> > --
> > BASRAOUI Karim
> > www.basraouik.afrikart.net
> >
> >  ------------------------------
> > This email (including any attachment) is subject to the following
> > disclaimer: http://m1.com.sg/M1/misc/disclaimer
> > ------------------------------
> >
>
>
>
> --
> BASRAOUI Karim
> www.basraouik.afrikart.net
>
> ------------------------------
> This email (including any attachment) is subject to the following
> disclaimer: http://m1.com.sg/M1/misc/disclaimer
> ------------------------------
>



-- 
BASRAOUI Karim
www.basraouik.afrikart.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070303/108e92d8/attachment.htm>