[Users] load testing presence server

[Toni Barata]

Hi Daniel,
 
Increasing the children from 4 to 16 did turn into same results (I was already using debug=3 and fork=yes).

But setting debug=0 did real turn in much better results. 

Thanks a lot,
Toni

-----Original Message-----
From: Daniel-Constantin Mierla [mailto:daniel at voice-system.ro] 
Sent: segunda-feira, 26 de Março de 2007 16:53
To: Toni Barata
Cc: users at openser.org
Subject: Re: [Users] load testing presence server

Hello,

if you use exactly the same config, then turn debug to a lower level 
(e.g., 3), set fork=yes and children to 16 for better results.

Cheers,
Daniel


On 03/26/07 18:48, Toni Barata wrote:
>
> Hi Anka,
>
>  
>
> In a scenario using Openser as a Presence Sever (using the config file 
> example located in 
> http://openser.org/dokuwiki/doku.php/presence:configuration-file), the 
> execution of load tests (with sipp) with Subscribe Presence WInfo had 
> as result a maximum of 20 sessions per second (We are using a Intel(R) 
> Xeon(TM) CPU 3.00GHz with 2GB RAM), with lots of retransmissions if we 
> increase to values bigger than 20 (Openser dos not crash). Is there 
> any configurable parameter in the Presence module that allows 
> increasing this value?
>
>  
>
> Best regards,
>
> Toni
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>