[Users] OpenSER and FWD

[Ovidiu Sas]

Hi Michel,

As I mentioned to you before, the answer is inside rfc3327.
Check if the registrar that you are using has support for it.



Regards,
Ovidiu Sas

On 3/19/07, Michel Bensoussan <michel at extricom.com> wrote:
> Hello
> I don't want the openser to register itself. The UA can register to any
> server. I just want to be sure that ALL SIP messages will path through
> the openser. For outgoing call and for incoming call. That's all. But I
> don't know how config the openser.
> On my SIP phone I defined openser as outbound proxy and as proxy server.
> For Registrar I defined another server.
> For outgoing calls there is no problem. The phone sends INVITE to
> openser and openser forwards the message.
> The problem is for incoming call. The INVITE message is sent directly to
> the phone and the openser doesn't know about it.
> How can I ensure that all incoming call will pass through openser?
> If I define the openser as registrar server, how a remote phone will
> found my sip phone?
>
> I start with the following configuration: there is already a sip server
> (anyone) and several sip phones. I just want the openser to be in the
> middle. Between the sip phones and the already existing server. And I
> want outgoing and incoming call to pass through the openser.
> How can I config that?
>
> Thanks.
>
> Regards,
> Michel.
>
>
> Daniel-Constantin Mierla wrote:
> > Hello,
> >
> > openser cannot register itself to fwd (or other proxy) in behalf of
> > users. you can use sipsak/sipp kind of tools to register contacts to
> > fwd, and uac module to be able to authenticate for calls.
> >
> > Cheers,
> > Daniel
> >
> > On 03/18/07 18:08, Michel Bensoussan wrote:
> >> Hi Ravi
> >>
> >> If you can help it will be great because I'm a little bit lost.
> >>
> >> What I need is to set the OpenSER proxy between a User Agent and FWD
> >> (or any other SIP Server/Registrar). I want the UA to register to the
> >> OpenSER and the OpenSER to register the UA to the FWD. In this case,
> >> all SIP message to the UA will pass through the OpenSER.
> >> Thank you.
> >>
> >> Regards,
> >> Michel.
> >>
> >> raviprakash sunkara wrote:
> >>> Hi Michel
> >>>
> >>>
> >>> Yes , U can forword the call of outgoing through openSER
> >>>
> >>> Here, means, U need to forward the call to asterisk 's or pstn gateways
> >>>
> >>> In  openSER when  the call invites to the callee , at  that time u
> >>> use the avpops modules ,
> >>>
> >>>
> >>> If  you wants I can do it for U......  a part time i can do for U.
> >>>
> >>>
> >>>
> >>>
> >>> On 3/18/07, *Michel Bensoussan* < michel at extricom.com
> >>> <mailto:michel at extricom.com>> wrote:
> >>>
> >>>     Hello.
> >>>
> >>>     How can I configure OpenSER to outgoing all call to FWD and more
> >>>     important to ensure that all INCOMING call will go through OpenSER?
> >>>
> >>>     Thanks.
> >>>
> >>>     Regards,
> >>>     Michel.
> >>>
> >>>     _______________________________________________
> >>>     Users mailing list
> >>>     Users at openser.org <mailto:Users at openser.org>
> >>>     http://openser.org/cgi-bin/mailman/listinfo/users
> >>>
> >>>
> >>>
> >>>
> >>> --
> >>> Thanks and Regards
> >>> Ravi Prakash Sunkara
> >>> ravi.sunkara at hyperion-tech.com <mailto:ravi.sunkara at hyperion-tech.com>
> >>> M:+91 9985077535
> >>> www.hyperion-tech.com <http://www.hyperion-tech.com>
> >>> Client and Parent company :- www.august-networks.com
> >>> <http://www.august-networks.com>
> >> ------------------------------------------------------------------------
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at openser.org
> >> http://openser.org/cgi-bin/mailman/listinfo/users
> >>
> >
> >
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>