[Users] ?opsr? - setup

Bogdan-Andrei Iancu bogdan at voice-system.ro
Mon Feb 12 13:02:20 CET 2007


Hi Michel,

if you did a default installation from sources, the install dir is 
/usr/local and the default cfg script will by in /usr/local/etc/openser .

if you want to use a specific conf file, use the -f parameter:
    openser -f /etc/openser/openser.cfg

regards,
bogdan

Michel Bensoussan wrote:
> Hello
> I have some setup problems.
> I compiled and install as following:
>
> /prompt$ make mode=debug all
> prompt$ su
> prompt# make install
>
> /To run openSer I tried:
>
> /prompt# /usr/local/sbin/openser
> /
> and
>
> /prompt# /usr/local/sbin/openser D E
> /
> in both case there is the following output:
>
> /              127.0.0.1 [127.0.0.1]:5060
>              192.168.1.86 [192.168.1.86]:5060
>              192.169.4.86 [192.169.4.86]:5060
>              192.168.13.86 [192.168.13.86]:5060
>              127.0.0.1 [127.0.0.1]:5060
>              192.168.1.86 [192.168.1.86]:5060
>              192.169.4.86 [192.169.4.86]:5060
>              192.168.13.86 [192.168.13.86]:5060
> Listening on
>             udp: 127.0.0.1 [127.0.0.1]:5060
>             udp: 192.168.1.86 [192.168.1.86]:5060
>             udp: 192.169.4.86 [192.169.4.86]:5060
>             udp: 192.168.13.86 [192.168.13.86]:5060
>             tcp: 127.0.0.1 [127.0.0.1]:5060
>             tcp: 192.168.1.86 [192.168.1.86]:5060
>             tcp: 192.169.4.86 [192.169.4.86]:5060
>             tcp: 192.168.13.86 [192.168.13.86]:5060
> Aliases:
>             tcp: michel:5060
>             tcp: michel.local:5060
>             tcp: localhost:5060
>             udp: michel:5060
>             udp: michel.local:5060
>             udp: localhost:5060
>
> //prompt#
>
> /Attached my config file ( /etc/openser/openser.cfg).
> On this config file, I set listen=192.168.13.86 so I expected the 
> openSER to listen only 192.168.13.86.
>
> Actually I don't understand from where the application takes the 
> openser.cfg file?
>
> I removed /etc/openser/openser.cfg but the application is still running.
> /
> /Regards,
> Michel.
> /




More information about the sr-users mailing list