[Serusers] serweb CTD and IM problem! Heeeelp!

[Andrey Kouprianov]

Thank you anyway! Any reply is fine.. :)

On 5/17/06, samuel <samu60 at gmail.com> wrote:
> First of all, probably nobody answered before because nobody had a
> proper answer and posting several times won't help...
>
> I sent an e-mail about sending NOTIFY from SER to subscriberss because
> there was a problem when selecting the socket. I have just seen
> another mail about problems selecting the socket. This might (or might
> not) be related to your problem and if it does, be patient because
> people is working on it (and their time is as precious as yours).
> It the socket selection does not affect you, it looks like the
> end-point is not reachable, either to NAT problems or connection
> problems and in this case you should look at router configurations and
> network traces or similar.
>
> About the APU...I can not help you because I have no clue what it is about...
>
>
> As you see I can not help you much and that's why I did not answer before....
>
> Luck!!!
>
> Samuel.
>
> 2006/5/17, Andrey Kouprianov <andrey.kouprianov at gmail.com>:
> >   Hi,
> >
> > I posting for the fourth time on the row!!!! Can ANYONE answer me please!
> >
> > I have installed serweb 0.9.4, ser 0.9.6, php4 with all the supports
> > needed, pear with DB support, apache 1.3, mysql 1.3.34. Did i miss
> > anything? Oh, pear Log is also installed.
> >
> > Everything is working fine EXCEPT that i cannot send IM from serweb as
> > well as I cannot CTD from serweb. They both reply with "503 Service
> > Unavlailable" or sometimes its 408 Timeout. There's no documentation
> > or threads in the mailing list on this topic, so i cannot look up what
> > is wrong. All available documentation is obsolete.
> >
> > SIP clients I use are eyeBeams, so they both support REFER and MESSAGE methods.
> >
> > Here's /var/log/message log after trying to CTD (both clients are registered!):
> >
> > May 17 16:06:35 sip /usr/local/sbin/ser[47471]: ERROR: udp_send:
> > sendto(sock,0x284be0d0,546,0,0x284bd4f8,16): Host is down(64)
> > May 17 16:06:35 sip /usr/local/sbin/ser[47471]: msg_send: ERROR: udp_send failed
> > May 17 16:06:35 sip /usr/local/sbin/ser[47471]: Warning:
> > run_failure_handlers: no UAC support (0, 256)
> >
> >
> > Here's /var/log/message log after trying to IM:
> >
> > May 17 16:09:52 sip /usr/local/sbin/ser[47471]: ERROR: udp_send:
> > sendto(sock,0x284be0d0,462,0,0x284bd4f8,16): Host is down(64)
> > May 17 16:09:52 sip /usr/local/sbin/ser[47471]: msg_send: ERROR: udp_send failed
> > May 17 16:09:52 sip /usr/local/sbin/ser[47471]: Warning:
> > run_failure_handlers: no UAC support (0, 256)
> >
> >
> > I set log level for serweb to PEAR_LOG_DEBUG and among some normal
> > trace stuff i can see something like this
> >
> > May 17 16:13:20 serweb [debug] Html form was not assigned to APU
> > apu_aliases3.  Useing default.
> > May 17 16:13:20 serweb [debug] Html form was not assigned to APU
> > apu_acl4.  Useing default.
> >
> > ( Is there something I forgot to set or is it just normal? I suppose
> > it's ok, if it's "using default"...)
> >
> > ngrep trace show some empty messages from my eyeBeam to SER and
> > backwards. That's all.
> >
> > I've been stuck with this for 4-5 days already and I REALLY need to
> > get it done asap. Someone... anyone... please, suggest something.
> >
> >    Best regards,
> >
> >     Andrey.
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
>