[Serusers] IM and presence problems

İlker Aktuna (Koç.net) ilkera at koc.net
Tue May 2 10:39:01 CEST 2006


Hi,

Which level of debug should I use ?
debug= ?  (I tried debug=7 but nothing changed)

Btw, my clients are behind NAT. But I already forward them to an RTP+SIP proxy for voice communication. And there is no rpoblem with voice.
Should I use any nathelper configuration for presence messages ?

Thanks,
ilker

-----Original Message-----
From: Vaclav Kubart [mailto:vaclav.kubart at iptel.org]
Sent: Tuesday, May 02, 2006 11:23 AM
To: İlker Aktuna (Koç.net)
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] IM and presence problems

I think, that this problem is not caused by absence of unixsock or unconfigured fifo module.

Have you restarted ser after changing debug level (debug=xxx in cfg)?
There should be lots of messages.

        Vaclav

On Tue, May 02, 2006 at 10:49:22AM +0300, ?lker Aktuna (Koç.net) wrote:
> Hi,
>
> Do you think that I need  unixsock module ?
> Also, do I need any configuration for fifo module ?
>
> I'm now using the CVS version and with full configuration in the presence handbook.
> Everything seems to work except presence messages.
>
> After increasing the loglevel to 7 there is no more information in the log.
> Only these lines:
>
> May  2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket
> found May  2 10:56:49 sesapp /root/ser/sbin/ser[18655]: ERROR:
> notify.c:398: Can't send watcherinfo notification (-7) May  2 10:56:49
> sesapp /root/ser/sbin/ser[18655]: send_winfo_notify returned -7 May  2
> 10:56:49 sesapp /root/ser/sbin/ser[18649]: t_uac: no socket found May 
> 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket found
>
> If it would help , I can send you my full configuration.
> I need help desperately.
>
> Regards,
> ilker
>
> -----Original Message-----
> From: Vaclav Kubart [mailto:vaclav.kubart at iptel.org]
> Sent: Tuesday, May 02, 2006 10:09 AM
> To: ?lker Aktuna (Koç.net)
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] IM and presence problems
>
> Hi,
> as I can see from the dump - MESSAGEs go through without problems, right?
> Try to increase debug level in config file, might be, you will see more.
> I don't see any problems... :-(
>
>         Vaclav
>
> On Fri, Apr 28, 2006 at 03:32:24PM +0300, ?lker Aktuna (Koç.net) wrote:
> > Hi Vaclav,
> >
> > I've installed ngrep and sending you ngrep output.
> >
> > "t_uac: no socket found" error is occuring in nearly all of the events.
> > Should I use unixsock module ? If yes, what are the needed parameters ?
> > Currently fifo module is loaded. Should I use it also ?
> >
> > For problem 2 ; you are right. I am using Eyebeam. Then I'll ignore this error.
> >
> > Thanks for your help.
> >
> > ilker
> >




 <http://387555.sigclick.mailinfo.com/sigclick/030A0601/04014E01/090A4D06/20214142.jpg>
_____________________________________________________________________________________________________________________________________________
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa,  icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz  ve  tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz.  Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. 
This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential  information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however,  sender  cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence.
_____________________________________________________________________________________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060502/96a15ce6/attachment.htm>


More information about the sr-users mailing list