[Users] openser and authentication

Bogdan-Andrei Iancu bogdan at voice-system.ro
Wed Mar 15 12:52:47 CET 2006


Hi Alessandro,

I would say it's a bug in softphone. have you tried with a different 
one? xlite, kphone, minisip?

regards,
Bogdan

buxalex at libero.it wrote:

>Hello Bogdan,
>
>I made some more tests, and I realized that:
>
>After registering my softphone (Express Talk) with user and password correct, if I change the password with a wrong one,
>the softphone registers anyway to openser. But if I shutdown 
>the softphone and I restart it with a wrong password, the registration is refused (error 401). So I am wandering whether
>it is a softphone problem or a bug into openser. I have this doubt, because changing the user with a non existent into db, softphone doesn't register to openser even avoiding to shutdown the softphone. What do you think?
>
>
>Thanks for your support...
>Alessandro
>
>
>---------- Initial Header -----------
>
>From      : "Bogdan-Andrei Iancu" bogdan at voice-system.ro
>To          : "buxalex at libero.it" buxalex at libero.it
>Cc          : "users" users at openser.org
>Date      : Wed, 15 Mar 2006 11:22:39 +0200
>Subject : Re: [Users] openser and authentication
>
>
>
>
>
>
>
>  
>
>>Hi Alessandro,
>>
>>do you see any challenge from openser as a response to the REGISTER 
>>requests? have you try the debug mode to get more info about what is 
>>going one?
>>
>>regards,
>>bogdan
>>
>>buxalex at libero.it wrote:
>>
>>    
>>
>>>Hello,
>>>I am new with openser, and I am trying to figure out how to setup the openser.cfg.
>>>I've installed openser 1.1.0 with the db support. It works fine, infact I can register softphones and have calls. The softphones are correctly registered checking the username into Mysql db. I would like to check also the password, and maybe the phone number, so I tried to enter the following parameter:
>>>
>>>modparam("auth_db", "calculate_ha1", yes) 
>>>modparam("auth_db", "password_column", "password") 
>>>
>>>but it doesn't work, infact the softphones are anyway registered (it checks only the username). Did I missed something in my configuration?
>>>
>>>Thnaks a lot
>>>Alessandro
>>>
>>>PS. This is my openser.config (sorry for the long mail...):
>>>
>>># ----------- global configuration parameters -- 
>>>debug=3 # debug level (cmd line: -dddddddddd) 
>>>fork=yes 
>>>log_stderror=no # (cmd line: -E) 
>>>check_via=no # (cmd. line: -v) 
>>>dns=no # (cmd. line: -r) 
>>>rev_dns=no # (cmd. line: -R) 
>>>port=5060 
>>>children=4 
>>>fifo="/tmp/openser_fifo" 
>>>
>>># ------------------ module loading 
>>>loadmodule "/usr/local/lib/openser/modules/mysql.so" 
>>>loadmodule "/usr/local/lib/openser/modules/sl.so" 
>>>loadmodule "/usr/local/lib/openser/modules/tm.so" 
>>>loadmodule "/usr/local/lib/openser/modules/rr.so" 
>>>loadmodule "/usr/local/lib/openser/modules/maxfwd.so" 
>>>loadmodule "/usr/local/lib/openser/modules/usrloc.so" 
>>>loadmodule "/usr/local/lib/openser/modules/registrar.so" 
>>>loadmodule "/usr/local/lib/openser/modules/textops.so" 
>>>loadmodule "/usr/local/lib/openser/modules/alias_db.so" 
>>>
>>>loadmodule "/usr/local/lib/openser/modules/auth.so" 
>>>loadmodule "/usr/local/lib/openser/modules/auth_db.so" 
>>>
>>># ----------------- setting module-specific parameters - 
>>>modparam("usrloc", "db_url", "mysql://openser:openser@localhost/openser") 
>>>modparam("usrloc", "db_mode", 2) 
>>>modparam("auth_db", "calculate_ha1", yes) 
>>>modparam("auth_db", "password_column", "password") 
>>>modparam("rr", "enable_full_lr", 1) 
>>>......
>>>if (method=="REGISTER") { 
>>>if (!www_authorize("161.27.53.93", "subscriber")) { 
>>>www_challenge("161.27.53.93", "0"); 
>>>exit; 
>>>}; 
>>>save("location"); 
>>>exit; 
>>>}; 
>>>lookup("aliases"); 
>>>if (!uri==myself) { 
>>>append_hf("P-hint: outbound alias\r\n"); 
>>>route(1); 
>>>};  
>>>...... 
>>>
>>>
>>>_______________________________________________
>>>Users mailing list
>>>Users at openser.org
>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>> 
>>>
>>>      
>>>
>
>
>  
>





More information about the sr-users mailing list