[Serusers] Newbie question: Registration problem

[Andrey Kouprianov]

Hi,

Not sure about the problem ur facing, but "./serctl alias show" shows
aliases, not registrations. if you want to check for registrations
then use

./serctl ul show

As for your messages, check if domain/port/ip is set properly (if you
have domain at all) on both client and server sides.

   Andrey.

On 7/20/06, VIDOVIC Mato <Mato.VIDOVIC at frequentis.com> wrote:
>
>
>
> Hi folks!
>
> It is couple of days I am struggling with a problem to get SER up and
> running.
> I want to run it under SUSE 10.1 in the first instance simply without MySQL,
> RADIUS etc. - I am using the SER distribution 0.9.6.
>
> To my problem: actually, I can start SER and I get the information as
> follows:
> -------------
> Listening on
>              udp: 127.0.0.1 [127.0.0.1]:5060
>              udp: 169.254.158.130 [169.254.158.130]:5060
>              tcp: 127.0.0.1 [127.0.0.1]:5060
>              tcp: 169.254.158.130 [169.254.158.130]:5060
> Aliases:
>              tcp: localhost:5060
>              udp: localhost:5060
>
> --------------------------
> The locally started client X-lite registers with SER  without a problem
> (command  ./serctl alias show confirms this).
> However, it is the only one who registers - all other (HW phone snom360 and
> other soft clients on other machine) send their REGISTER
>
> messages, but there is no answer from SER (and no ICMP messages from the
> machine, what is normal and OK!).
> In the ethereal trace it may be seen that SIP REGISTER messages are coming
> to the machine and there is no answer.
>
> I would appreciate any hint where I can look to see the problem.
>
> Best regards,
> Mato
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>