[Serusers] a question about "cancel" in forwardingscenario
Greger V. Teigre
greger at teigre.com
Wed Feb 15 08:27:23 CET 2006
I think you need to make an ngrep SIP trace of the two scenarios. SER will
not generate a 408 unless the timer hits. Increase the timer (it will be
easier to see what happens). You use a very low timer value
(fr_inv_timer=15). Set it to 120. Then look for the CANCEL from ua3. Does
SER receive the CANCEL and process it (use debug mode 7)?
I'm not sure if this is the same as mentioned in the bug referred to in
another reply, but let's try to find out.
Please post the ngrep trace for the two scenarios.
g-)
----- Original Message -----
From: "zhangshuai" <zhangshuai at goldentek.biz>
To: "serusers" <serusers at lists.iptel.org>
Cc: "wuyuan" <wuyuan at goldentek.biz>
Sent: Tuesday, February 14, 2006 9:41 AM
Subject: Re: Re: Re: [Serusers] a question about "cancel" in
forwardingscenario
> Dear Greger V. Teigre,
>
>
> I've tried t_on_failure("2").
>
> failure_route[2] {
> #when caller cancel, terminate the call
> if (t_check_status("487")) {
> log(1,"cancel received\n");
> t_reply("487", "Request Terminated");
> break;
> }
> }
>
> There are similar lines in failure_route[1]. When ua2 is ringing and ua1
> cancel the call, the value of "t_check_status("487")" in failure_route[1]
> will be true. However, When ua3 is ringing and ua1 cancel the call, the
> value of "t_check_status("487")" in failure_route[2] will be false. This
> time, t_check_status() returns "408". I don't know why SER generates "408"
> under this circumstance. My ser's version is 0.9.3 and I just run
> update_from_cvs. And I found similar description here:
> http://bugs.sip-router.org/browse/SER-63
> Is it an unsolved problem?
>
>
>>Do some logging, what happens in the failure route? To me, it looks like
>>your config appends a branch. BTW, run update_from_cvs in your SER source
>>dir top make sure you get the latest bug fixes!
>>g-)
>>
>>----- Original Message -----
>>From: "zhangshuai" <zhangshuai at goldentek.biz>
>>To: "serusers" <serusers at lists.iptel.org>
>>Cc: "wuyuan" <wuyuan at goldentek.biz>
>>Sent: Tuesday, February 14, 2006 3:49 AM
>>Subject: Re: Re: [Serusers] a question about "cancel" in forwarding
>>scenario
>>
>>
>>> Dear Greger V. Teigre,
>>>
>>>
>>>
>>> Thanks for your quick reply.
>>>
>>> I have read the sergettingstarted05.pdf (Based upon SER version 0.9.3)
>>> and
>>> tested the onr.cfg in
>>> ser-0.9.3.GettingStarted.1.3.tar.gz/ser-0.9.3/examples many times. SER
>>> sent out "408" to caller immediately after received "486" from ua3. I
>>> don't know how does ser's failure route deal with this kind of "cancel"
>>> when the invite has been forwarded. Any ideas will help me a lot.
>>> Thanks!
>>>
>>> Here is the onr.cfg:
>>>
>>> # ------------------ module loading ----------------------------------
>>> loadmodule "/usr/local/lib/ser/modules/sl.so"
>>> loadmodule "/usr/local/lib/ser/modules/tm.so"
>>> # ----------------- setting module-specific parameters ---------------
>>>
>>> # -- tm params --
>>> # set time for which ser will be waiting for a final response;
>>> # fr_inv_timer sets value for INVITE transactions, fr_timer
>>> # for all others
>>> modparam("tm", "fr_inv_timer", 15 )
>>> modparam("tm", "fr_timer", 10 )
>>>
>>> # ------------------------- request routing logic -------------------
>>>
>>> # main routing logic
>>>
>>> route{
>>> # for testing purposes, simply okay all REGISTERs
>>> if (method=="REGISTER") {
>>> log("REGISTER");
>>> sl_send_reply("200", "ok");
>>> break;
>>> };
>>> # try these two destinations first in parallel; the second
>>> # destination is targeted to sink port -- that will make ser
>>> # wait until timer hits
>>> seturi("sip:200 at 218.97.252.35:5060");
>>> #append_branch("sip:300 at 218.97.252.36:5060");
>>> # if we do not get a positive reply, continue at reply_route[1]
>>> t_on_failure("1");
>>> # forward the request to all destinations in destination set now
>>> t_relay();
>>> }
>>>
>>> failure_route[1] {
>>> #when caller cancel, terminate the call
>>> if (t_check_status("487")) {
>>> t_reply("487", "Request Terminated");
>>> break;
>>> };
>>> # forwarding failed -- try again at another destination
>>> append_branch("sip:300 at 218.97.252.44:5060");
>>> log(1,"first redirection\n");
>>> # if this alternative destination fails too, proceed to
>>> reply_route[2]
>>> #t_on_failure("2");
>>> t_relay();
>>> }
>>>
>>>
>>> Thanks in advance.
>>>
>>> Have a good day!
>>>
>>>
>>>
>>> Shuai
>>>
>>>
>>>>The internal SER timer hits and the request times out (the request is
>>>>not
>>>>terminated).
>>>>See SER-GettingStarted doc at ONsip.org for a full example of call
>>>>features
>>>>like forwarding.
>>>>g-)
>>>>----- Original Message -----
>>>>From: "zhangshuai" <zhangshuai at goldentek.biz>
>>>>To: "serusers" <serusers at lists.iptel.org>
>>>>Cc: "wuyuan" <wuyuan at goldentek.biz>
>>>>Sent: Friday, February 10, 2006 11:18 AM
>>>>Subject: [Serusers] a question about "cancel" in forwarding scenario
>>>>
>>>>
>>>>> Dear All,
>>>>>
>>>>>
>>>>> I want to make use of avpops module to achieve forward on-no-reply.
>>>>> When
>>>>> ua1 calls ua2 and ua2 is off-line, or busy, or doesn't answer the
>>>>> phone,
>>>>> the invite should be forwarded to ua3 and ua3 begins ringing.
>>>>>
>>>>> In my tests, first, ua1 sends "cancel" when ua2 is ringing. Ua1
>>>>> receives
>>>>> "487 Request Terminated" from SER. Second, ua1 sends "cancel" when ua3
>>>>> is
>>>>> ringing. So, theoretically, ua1 should receive "487 Request
>>>>> Terminated"
>>>>> after "200 canceling" from SER, right? But, ua1 received "408 Request
>>>>> Timeout" instead. So strange. How come?
>>>>>
>>>>> I think something is wrong with my ser.cfg. Could anyone help me about
>>>>> this? Thanks in advance.
>>>>>
>>>>> Here is my ser.cfg:
>>>>>
>>>>> # ------------------ module loading ----------------------------------
>>>>>
>>>>> loadmodule "/usr/local/lib/ser/modules/sl.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/tm.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/rr.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/textops.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/avp.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/acc.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/dbtext.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/avpops.so"
>>>>> #loadmodule "/usr/local/lib/ser/modules/postgres.so"
>>>>> #loadmodule "/usr/local/lib/ser/modules/flatstore.so"
>>>>>
>>>>> # Uncomment this if you want digest authentication
>>>>> # mysql.so must be loaded !
>>>>> loadmodule "/usr/local/lib/ser/modules/auth.so"
>>>>> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>>>>>
>>>>> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/group_radius.so"
>>>>> loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
>>>>> # ----------------- setting module-specific parameters ---------------
>>>>>
>>>>> # -- usrloc params --
>>>>>
>>>>> #modparam("usrloc", "db_mode", 0)
>>>>>
>>>>> # Uncomment this if you want to use SQL database
>>>>> # for persistent storage and comment the previous line
>>>>> modparam("usrloc", "db_mode", 1)
>>>>>
>>>>> # -- auth params --
>>>>> # Uncomment if you are using auth module
>>>>> #
>>>>> #modparam("auth_db", "calculate_ha1", yes)
>>>>> #
>>>>> # If you set "calculate_ha1" parameter to yes (which true in this
>>>>> config),
>>>>> # uncomment also the following parameter)
>>>>> #
>>>>> #modparam("auth_db", "password_column", "password")
>>>>>
>>>>> # -- rr params --
>>>>> # add value to ;lr param to make some broken UAs happy
>>>>>
>>>>> modparam("rr", "enable_full_lr", 1)
>>>>> modparam("tm", "fr_timer", 10 )
>>>>> modparam("tm", "fr_inv_timer", 20)
>>>>> modparam("tm", "noisy_ctimer", 1)
>>>>>
>>>>> modparam("auth_radius|uri_radius|group_radius", "radius_config",
>>>>> "/usr/local/etc/radiusclient-ng/radiusclient.conf")
>>>>>
>>>>> modparam("avpops","avp_url","mysql://ser:heslo@localhost/ser")
>>>>> modparam("avpops","avp_table","usr_preferences")
>>>>> # ------------------------- request routing logic -------------------
>>>>>
>>>>> # main routing logic
>>>>>
>>>>> route{
>>>>> # initial sanity checks -- messages with
>>>>> # max_forwards==0, or excessively long requests
>>>>> if (!mf_process_maxfwd_header("10")) {
>>>>> sl_send_reply("483","Too Many Hops");
>>>>> break;
>>>>> };
>>>>> if (msg:len >= 2048 ) {
>>>>> sl_send_reply("513", "Message too big");
>>>>> break;
>>>>> };
>>>>>
>>>>> if (!method=="REGISTER") record_route();
>>>>>
>>>>> if (loose_route()) {
>>>>> t_relay();
>>>>> break;
>>>>> };
>>>>>
>>>>> if (method=="INVITE") {
>>>>> lookup("location");
>>>>> #if (!lookup("location")) {
>>>>> # sl_send_reply("404", "Not Found");
>>>>> # break;
>>>>> #};
>>>>> }
>>>>>
>>>>> if (method=="REGISTER") {
>>>>> log("REGISTER\n");
>>>>> if (!radius_www_authorize("localhost.localdomain")) {
>>>>> www_challenge("localhost.localdomain", "0");
>>>>> break;
>>>>> };
>>>>> save("location");
>>>>> break;
>>>>> };
>>>>>
>>>>> if (method=="INVITE") {
>>>>> if (!radius_proxy_authorize("localhost.localdomain")) {
>>>>> proxy_challenge("localhost.localdomain", "1");
>>>>> break;
>>>>> };
>>>>> }
>>>>>
>>>>> # if we do not get a positive reply, continue at failure_route[1]
>>>>> t_on_failure("1");
>>>>> # forward the request to all destinations in destination set now
>>>>> t_relay();
>>>>>
>>>>> #if (!t_relay()) {
>>>>> # sl_reply_error();
>>>>> #};
>>>>> }
>>>>>
>>>>> failure_route[1] {
>>>>>
>>>>> #when caller cancel, terminate the call
>>>>> if (t_check_status("487")) {
>>>>> t_reply("487", "Request Terminated");
>>>>> break;
>>>>> };
>>>>>
>>>>> if ( ( avp_db_load("$ruri","s:redirect_on_failure") &&
>>>>> avp_check("redirect_on_failure","eq/i:1"))) {
>>>>> # User need to forward
>>>>> log(1, "User wants redirection.\n");
>>>>> if ( ( avp_db_load("$ruri","s:redirectnumber") &&
>>>>> !avp_check("redirectnumber","re/^$"))) {
>>>>> log(1,"first redirect\n");
>>>>> #avp_print();
>>>>> attr2uri("redirect number");
>>>>> lookup("location");
>>>>> append_branch();
>>>>> #t_on_failure("2");
>>>>> t_relay();
>>>>> }
>>>>> else {
>>>>> t_reply("408", "TimeOut");
>>>>> break;
>>>>> };
>>>>> }
>>>>> else {
>>>>> t_reply("404", "Not Found");
>>>>> break;
>>>>> };
>>>>> }
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Serusers mailing list
>>>>> serusers at lists.iptel.org
>>>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>>>
>>>>
>>>>
>>>
>>> = = = = = = = = = = = = = = = = = = = =
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Serusers mailing list
>>> serusers at lists.iptel.org
>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>
>>
>
> = = = = = = = = = = = = = = = = = = = =
>
>
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list