[Serusers] Ser and Fax over IP and Real-Time Fax configurations

[Tobias Lindgren]

Elias,

It's dependent on what type of fax your IP-equipment supports. For
example, if your fax on the IP-side supports T.38, you could try this
line within your dail-peer for that destination:
"fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco"

Br,
Tobias

Elias Kaaria said the following on 2006-02-03 06:52:
> Dear Tobias,
> Thanks you for your assistance on As5350 configurations and sip. Now am
> about to configure Fax over IP and Real-Time Fax in my ser sip server. I
> will appreciate your input on the same,
>  
> Thanking you in advance.
>  
> Yours sincerely,
>  
> Elias Gitonga kaaria
> 
>  
> On 1/12/06, *Tobias Lindgren* <tobias.lindgren at ip-only.se
> <mailto:tobias.lindgren at ip-only.se>> wrote:
> 
>     Hello,
> 
>     Just an example.
> 
>     dial-peer voice 1234567 voip
>     huntstop
>     application session
>     destination-pattern 01234567.
>     progress_ind setup enable 3
>     progress_ind progress enable 8
>     voice-class codec 10
>     session protocol sipv2
>     session target sip-server
>     dtmf-relay rtp-nte
>     no vad
>     !
> 
>     The "session target sip-server" is configured within "sip-ua".
> 
>     Br,
>     /T
> 
>     Elias Kaaria said the following on 2006-01-10 06:54:
>     > Dear all,
>     > Am about to configure cisco AS5350 to forward calls to Ser Sip server,
>     > kindly forward any configurations for the same.
>     >
>     >
>     > Kind regards,
>     > Elias Gitonga
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > Serusers mailing list
>     > serusers at lists.iptel.org <mailto:serusers at lists.iptel.org>
>     > http://lists.iptel.org/mailman/listinfo/serusers
> 
>