[Users] Multiple interfaces and mediaproxy
Fernando Rodriguez
frod at aitelecom.net
Tue Oct 11 15:32:16 CEST 2005
And how do u tell openser wich mediaproxy sock to use since you only have
one openser running.
Basicaly my setup is like this
Eth0 ______________
Lan 1 192.168.10.23 | Openser |eth3 Internet no-ip.domain
------------------------| Media Proxy |--------------------
|______________|
|eth1
|Lan 10.10.20.1
|
My problem is that i want to Proxy the different lans
My configuration for openser is, as you can see I use different prefix
number depending on the lan they use so I don't use the mediaproxy channels
when the call is going to be between the same lan and use the media proxy
when the call is destined to a different lan.
And my problem is that if the mediaproxy.py starts running using ip 192.168
and I start a call from network 10.10 the mediaproxy dosnt foreward the
packets and so on..
Thanks
# ----------- global configuration parameters ------------------------
#debug=9 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
children=4
fifo="/tmp/openser_fifo"
fifo_db_url="mysql://openser:openserrw@localhost/openser"
alias="aitelecom.net"
# ------------------ module loading ----------------------------------
#loadmodule "/usr/lib/openser/modules/acc.so"
loadmodule "/usr/lib/openser/modules/mysql.so"
loadmodule "/usr/lib/openser/modules/sl.so"
loadmodule "/usr/lib/openser/modules/tm.so"
loadmodule "/usr/lib/openser/modules/rr.so"
loadmodule "/usr/lib/openser/modules/maxfwd.so"
loadmodule "/usr/lib/openser/modules/usrloc.so"
loadmodule "/usr/lib/openser/modules/registrar.so"
loadmodule "/usr/lib/openser/modules/auth.so"
loadmodule "/usr/lib/openser/modules/auth_db.so"
loadmodule "/usr/lib/openser/modules/uri.so"
loadmodule "/usr/lib/openser/modules/uri_db.so"
loadmodule "/usr/lib/openser/modules/domain.so"
loadmodule "/usr/lib/openser/modules/mediaproxy.so"
loadmodule "/usr/lib/openser/modules/nathelper.so"
loadmodule "/usr/lib/openser/modules/textops.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "timer_interval", 10)
modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser")
# -- auth params --
modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -- tm Params --
modparam("tm", "fr_inv_timer", 45 )
modparam("tm", "fr_timer", 12 )
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "natping_interval", 30)
#modparam("nathelper", "sipping_from", "sip:ping at sipserver.net")
#modparam("mediaproxy", "ping_nated_only", 1) # Ping only clients behind
NAT
#modparam("mediaproxy", "natping_interval", 20)
modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock")
modparam("registrar", "nat_flag", 6)
# ------------------------- request routing logic -------------------
# main routing logic
route {
# -----------------------------------------------------------------
# Procesos de Limpieza
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Registro
# -----------------------------------------------------------------
log(1, "Entrando al area de Registro\n");
if (method!="REGISTER") {
log(1, "Area de Registro\n");
record_route();
};
log(1, "Saliendo del area de Registro\n");
# -----------------------------------------------------------------
# Call Tear Down Section
# -----------------------------------------------------------------
log(1, "Entrando al area de Fin de LLamada\n");
if (method=="BYE" || method=="CANCEL") {
log(1, "Proceso de fin de llamada\n");
end_media_session();
};
log(1, "Saliendo de Fin de LLamada\n");
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
if (has_totag() && (method=="INVITE" || method=="ACK")) {
if (client_nat_test("3") ||
search("^Route:.*;nat=yes")) {
setflag(6);
use_media_proxy();
};
};
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="CANCEL") {
route(3);
break;
} else if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
};
route(1);
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
t_on_reply("1");
if (!t_relay()) {
if (method=="INVITE" || method=="ACK") {
end_media_session();
};
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
sl_send_reply("100", "Trying");
# if(dst_ip==192.168.1.1) {
# log("message received on loopback interface\n");
# setflag(7);
# fix_nated_register();
# force_rport();
# };
# if(dst_ip==192.168.108.253) {
# log("message received on loopback interface\n");
# setflag(6);
# fix_nated_register();
# force_rport();
# };
if (!www_authorize("aitelecom.net","subscriber")) {
www_challenge("aitelecom.net","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# CANCEL and INVITE Message Handler
# -----------------------------------------------------------------
if(dst_ip==192.168.1.1) {
log("message received on loopback interface\n");
setflag(7);
fix_nated_contact();
force_rport();
};
if(dst_ip==192.168.108.253) {
log("message received on loopback interface\n");
setflag(6);
fix_nated_contact();
force_rport();
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
if (method=="CANCEL") {
route(1);
break;
};
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
#if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" &&
#!search("^Route:")){
# sl_send_reply("479", "We don't forward to private IP addresses");
# break;
# };
# if (uri=~"[@:](192\.168\.108\.)" || uri=~"[@:](192\.168\.1\.)") {
# use_media_proxy();
#};
#
------------------------------------------------------------------------
# Reglas de LLamada
#
------------------------------------------------------------------------
if(uri=~"(^sip:2[0-9]*@.*)" &&
from_uri=~"(^sip:1[0-9]*@.*)") {
log(1, "Llamada de extenciones 1xxx a 2xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:2[0-9]*@.*)" &&
from_uri=~"(^sip:3[0-9]*@.*)") {
log(1, "Llamada de extenciones 3xxx a 2xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:2[0-9]*@.*)" &&
from_uri=~"(^sip:4[0-9]*@.*)") {
log(1, "Llamada de extenciones 4xxx a 2xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:3[0-9]*@.*)" &&
from_uri=~"(^sip:1[0-9]*@.*)") {
log(1, "Llamada de extenciones 1xxx a 3xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:3[0-9]*@.*)" &&
from_uri=~"(^sip:2[0-9]*@.*)") {
log(1, "Llamada de extenciones 2xxx a 3xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:3[0-9]*@.*)" &&
from_uri=~"(^sip:4[0-9]*@.*)") {
log(1, "Llamada de extenciones 4xxx a 3xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:1[0-9]*@.*)" &&
from_uri=~"(^sip:2[0-9]*@.*)") {
log(1, "Llamada de extenciones 2xxx a 1xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:1[0-9]*@.*)" &&
from_uri=~"(^sip:3[0-9]*@.*)") {
log(1, "Llamada de extenciones 3xxx a 1xxx\n");
use_media_proxy();
};
if(uri=~"(^sip:1[0-9]*@.*)" &&
from_uri=~"(^sip:4[0-9]*@.*)") {
log(1, "Llamada de extenciones 4xxx a 1xxx\n");
use_media_proxy();
};
route(1);
}
onreply_route[1] {
#if ((isflagset(6) || isflagset(7)) &&
(status=~"(180)|(183)|2[0-9][0-9]")) {
# if (!search("^Content-Length:\ +0")) {
log(1, "Mensaje de prueba en reply route\n");
use_media_proxy();
# };
# };
}
-----Mensaje original-----
De: users-bounces at openser.org [mailto:users-bounces at openser.org] En nombre
de George Perantinos
Enviado el: Lunes, 10 de Octubre de 2005 10:50 p.m.
Para: users at openser.org
Asunto: Re: [Users] Multiple interfaces and mediaproxy
Yes Fernando, I'm doing it on multiproccessor machines. I'm using as many
mediaproxy proccesses as proccessors.
You have to have separate mediaproxy installation directories
(e.g. /usr/local/mediaproxy1/, /usr/local/mediaproxy2/ etc.), each one with
its own mediaproxyX.ini file, socket file, and its
own /etc/init.d/mediaproxyX start script.
It's quite easy.
On Monday 10 October 2005 21:20, Fernando Rodriguez wrote:
> Is there any way to run mediaproxy.py an make it listen on various ip
> adresses of a machine
>
> Thanks
>
>
>
> Fernando Rodriguez V.
> frod at aitelecom.net
> AITelecom S.A. de C.V.
> http://www.aitelecom.net
_______________________________________________
Users mailing list
Users at openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
More information about the sr-users
mailing list