[Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius Accounting
Klaus Darilion
klaus.mailinglists at pernau.at
Wed Nov 16 18:41:04 CET 2005
Hi!
please consider some things before posting:
1. do not use a wrong subject
2. if your email is a new topic, press "New Mail" instead of reply
3. Do not cross post when the topic is not interesting for all the
mailing lists. I would suggest users at openser.org
For your question - yes. I installed serweb (CVS version somewhere in
August) and used it with openser. Probably you have to adopt table
definitions from ser to openser.
klaus
Lokesh Kumar wrote:
> Hello Everyone,
>
> I am facing difficulty in configuring serweb with openser. Can anyone
> provide details of how do i can configure that. Above all is it possible to
> configure serweb with openser ???? or I am just wasting my time.
>
> I WILL BE VERY THANKFULL FOR EVERYONE
>
> Thanks a lot..
>
> Lokesh
>
> lokesh at interacesso.pt
>
>
>
> ----- Original Message -----
> From: "'Jan Janak'" <jan at iptel.org>
> To: "Bogdan-Andrei Iancu" <bogdan at voice-system.ro>
> Cc: <users at openser.org>; "'Lenir Santiago'"
> <lsantiago at globalgatewaycom.com>; <serusers at iptel.org>; <serdev at iptel.org>;
> <devel at openser.org>
> Sent: Wednesday, November 16, 2005 8:28 AM
> Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
> Accounting
>
>
>
>>Why would you do something like this ? All the info that is needed is in
>>Sip-Translated-Ruquest-ID below. You can see it in the RADIUS dump:
>>
>>Sip-Translated-Request-URI = "sip:949449852150#15615551212 at gateway:5060"
>>
>> Jan.
>>
>>On 16-11-2005 16:50, Bogdan-Andrei Iancu wrote:
>>
>>>Hi Lenir,
>>>
>>>you can keep the modified To value into an AVP and use the extra
>>>accounting feature to log it. See
>>> http://www.openser.org/docs/modules/1.1.x/acc.html#AEN115
>>>and
>>> http://www.openser.org/docs/modules/1.1.x/acc.html#AEN350
>>>
>>>the problem is how to set it as Called-Station-ID attribute in order to
>>>avoid overlapping. You can do a trick by playing with the radius
>>>dictionary (on proxy side) :
>>> changed the Called-Station-ID to a different ID attribute
>>> set extra accounting with the original attribute ID of
>
> Called-Station-ID
>
>>>in this way the acc will set de default TO as something else and you AVP
>>>as Called-Station-ID ;)
>>>
>>>regards,
>>>bogdan
>>>
>>>
>>>Lenir wrote:
>>>
>>>
>>>>Well, if userA dials to:30, 30 gets translated to:15615551212 and SER
>
> dials
>
>>>>15615551212, how can I make the acc.so module send the modified
>>>>to:15615551212 as the Called-Station-ID attribute?
>>>>
>>>>This is important for billing, specially if someone forwards to a long
>>>>distance or international long distance number.
>>>>
>>>>-----Original Message-----
>>>>From: serusers-bounces at iptel.org [mailto:serusers-bounces at iptel.org] On
>>>>Behalf Of Jan Janak
>>>>Sent: Wednesday, November 16, 2005 3:15 AM
>>>>To: Lenir Santiago
>>>>Cc: serdev at iptel.org; serusers at iptel.org; users at openser.org;
>>>>devel at openser.org
>>>>Subject: [Serusers] Re: [Serdev] Inaccurate Radius Accounting
>>>>
>>>>Hello,
>>>>
>>>>Called-Station-Id attribute always contains the To URI (not
>>>>Request-URI). You can find the outbound Request-URI in
>>>>Sip-Translated-Request-URI attribute.
>>>>
>>>>Even if you rewrite To header field, it will never be accounted in
>>>>Called-Station-Id.
>>>>
>>>>Jan.
>>>>
>>>>On 15-11-2005 21:59, Lenir Santiago wrote:
>>>>
>>>>
>>>>
>>>>>Hey guys,
>>>>>
>>>>>
>>>>>
>>>>>I'm using Radius to do pretty much everything regarding my users, i.e.
>>>>>registrations, authorization, features and preferences. I implemented
>
> my
>
>>>>>
>>>>own
>>>>
>>>>
>>>>
>>>>>way of doing speeddial by using AVPs provided by radius and AVPOPs
>
> module,
>
>>>>>Here is the snippet:
>>>>>
>>>>>
>>>>>
>>>>>AVP-SIP = speedial:30:15615551212
>>>>>
>>>>>
>>>>>
>>>>> avp_subst("s:caller_speedial/i:99", "/(.*):(.*)/\2/");
>>>>>#15615551212
>>>>>
>>>>> avp_printf("i:98","$rU:*"); #30
>>>>>
>>>>> avp_printf("i:97","sip:$avp($temp2)@$td"); #
>>>>>sip:15615551212 at xx.xx.xx.xx
>>>>>
>>>>> avp_printf("i:96","<sip:$avp($temp2)@$td>\r\n"); #
>>>>><sip:15615551212 at xx.xx.xx.xx>.
>>>>>
>>>>> xlog("L_N"," SPEEDIALING: $fU is speed-dialing
>>>>>$hdr(To)->$avp($temp2)\n");
>>>>>
>>>>> if (avp_check("s:caller_speedial", "fm/$temp1/g")) {
>>>>>
>>>>>
>>>>>
>>>>> #avp_pushto("$To","i:96");
>>>>>
>>>>> #avp_pushto("$ruri","i:97");
>>>>>
>>>>> #avp_pushto("$duri","i:97");
>>>>>
>>>>> #subst('/^To: (.*)@(.*)/To: "$avp($temp2)"
>>>>><$avp($temp2)@\2/');
>>>>>
>>>>> #append_hf("To: \"5615551212\"
>>>>><15615551212 at xx.xx.xx.xx>;user=phone");
>>>>>
>>>>>
>>>>>#subst_uri('/^sip:(.*)@(.*)$/sip:$avp($temp2)@\2/i');
>>>>>
>>>>> #subst_user('/(.*)/$avp($temp2)/');
>>>>>
>>>>> #remove_hf("To");
>>>>>
>>>>> rewriteuser("15615551212");
>>>>>
>>>>> xlog("L_N"," SPEEDIALING: $fU is dialing
>>>>>
>>>>>
>>>>
>>>>$hdr(To)
>>>>
>>>>
>>>>
>>>>>$avp($temp2)\n");
>>>>>
>>>>> avp_delete("$temp1/g");
>>>>>
>>>>> avp_delete("$temp2/g");
>>>>>
>>>>>
>>>>>
>>>>> };
>>>>>
>>>>>
>>>>>
>>>>>In this scenario, im forcing it instead of getting the value from AVPs
>>>>>
>>>>>
>>>>
>>>>just
>>>>
>>>>
>>>>
>>>>>for ease of showing my point. The problem that I'm having is that no
>>>>>
>>>>>
>>>>
>>>>matter
>>>>
>>>>
>>>>
>>>>>what I do to change the To header or change the R-URI, radius ALWAYS
>
> sends
>
>>>>>the accounting records with the original R-URI, in my case
>
> 30 at xx.xx.xx.xx,
>
>>>>>how can I get acc.so to send the final resulting URI
>>>>>(15615551212 at xx.xx.xx.xx) in the Called-Station-Id AVP?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
>
> id=97,
>
>>>>>length=298
>>>>>
>>>>> Acct-Status-Type = Start
>>>>>
>>>>> Service-Type = Sip-Session
>>>>>
>>>>> Acct-Terminate-Cause = 200
>>>>>
>>>>> Error-Cause = Invite
>>>>>
>>>>> User-Name = "1000 at xx.xx.xx.xx"
>>>>>
>>>>> Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
>>>>>
>>>>> Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
>>>>>
>>>>> Sip-Translated-Request-URI =
>>>>>"sip:949449852150#15615551212 at gateway;user=phone"
>>>>>
>>>>> Acct-Session-Id =
>>>>>
>>>>>
>>>>
>>>>"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
>>>>
>>>>
>>>>
>>>>> Sip-To-Tag = "230383F4-2AF"
>>>>>
>>>>> Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
>>>>>
>>>>> Sip-CSeq = "102"
>>>>>
>>>>> NAS-IP-Address = xx.xx.xx.xx
>>>>>
>>>>> NAS-Port = 5060
>>>>>
>>>>> Acct-Delay-Time = 0
>>>>>
>>>>>rlm_sql (sql): Reserving sql socket id: 12
>>>>>
>>>>>rlm_sql (sql): Released sql socket id: 12
>>>>>
>>>>>Sending Accounting-Response of id 97 to xx.xx.xx.xx:39216
>>>>>
>>>>>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
>
> id=98,
>
>>>>>length=292
>>>>>
>>>>> Acct-Status-Type = Stop
>>>>>
>>>>> Service-Type = Sip-Session
>>>>>
>>>>> Acct-Terminate-Cause = 200
>>>>>
>>>>> Error-Cause = 8
>>>>>
>>>>> User-Name = "1000 at xx.xx.xx.xx"
>>>>>
>>>>> Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
>>>>>
>>>>> Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
>>>>>
>>>>> Sip-Translated-Request-URI =
>>>>>"sip:949449852150#15615551212 at gateway:5060"
>>>>>
>>>>> Acct-Session-Id =
>>>>>
>>>>>
>>>>
>>>>"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
>>>>
>>>>
>>>>
>>>>> Sip-To-Tag = "230383F4-2AF"
>>>>>
>>>>> Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
>>>>>
>>>>> Sip-CSeq = "103"
>>>>>
>>>>> NAS-IP-Address = xx.xx.xx.xx
>>>>>
>>>>> NAS-Port = 5060
>>>>>
>>>>> Acct-Delay-Time = 0
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>Thanks in advance!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>Lenir
>>>>>_______________________________________________
>>>>>Users mailing list
>>>>>Users at openser.org
>>>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>
>>>>>
>>>>>
>>
>>_______________________________________________
>>Serusers mailing list
>>Serusers at iptel.org
>>http://mail.iptel.org/mailman/listinfo/serusers
>
>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
More information about the sr-users
mailing list