[Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius Accounting

Lokesh Kumar lokesh at interacesso.pt
Thu Nov 17 01:52:19 CET 2005


Hello Everyone,

I am facing difficulty in configuring serweb with openser. Can anyone
provide details of how do i can configure that. Above all is it possible to
configure serweb with openser ???? or I am just wasting my time.

I WILL BE VERY THANKFULL FOR EVERYONE

Thanks a lot..

Lokesh

lokesh at interacesso.pt



----- Original Message -----
From: "'Jan Janak'" <jan at iptel.org>
To: "Bogdan-Andrei Iancu" <bogdan at voice-system.ro>
Cc: <users at openser.org>; "'Lenir Santiago'"
<lsantiago at globalgatewaycom.com>; <serusers at iptel.org>; <serdev at iptel.org>;
<devel at openser.org>
Sent: Wednesday, November 16, 2005 8:28 AM
Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
Accounting


> Why would you do something like this ? All the info that is needed is in
> Sip-Translated-Ruquest-ID below. You can see it in the RADIUS dump:
>
> Sip-Translated-Request-URI = "sip:949449852150#15615551212 at gateway:5060"
>
>   Jan.
>
> On 16-11-2005 16:50, Bogdan-Andrei Iancu wrote:
> > Hi Lenir,
> >
> > you can keep the modified To value into an AVP and use the extra
> > accounting feature to log it. See
> >       http://www.openser.org/docs/modules/1.1.x/acc.html#AEN115
> > and
> >       http://www.openser.org/docs/modules/1.1.x/acc.html#AEN350
> >
> > the problem is how to set it as Called-Station-ID attribute in order to
> > avoid overlapping. You can do a trick by playing with the radius
> > dictionary (on proxy side) :
> >    changed the Called-Station-ID to a different ID attribute
> >    set extra accounting with the original attribute ID of
Called-Station-ID
> > in this way the acc will set de default TO as something else and you AVP
> > as Called-Station-ID ;)
> >
> > regards,
> > bogdan
> >
> >
> > Lenir wrote:
> >
> > >Well, if userA dials to:30, 30 gets translated to:15615551212 and SER
dials
> > >15615551212, how can I make the acc.so module send the modified
> > >to:15615551212 as the Called-Station-ID attribute?
> > >
> > >This is important for billing, specially if someone forwards to a long
> > >distance or international long distance number.
> > >
> > >-----Original Message-----
> > >From: serusers-bounces at iptel.org [mailto:serusers-bounces at iptel.org] On
> > >Behalf Of Jan Janak
> > >Sent: Wednesday, November 16, 2005 3:15 AM
> > >To: Lenir Santiago
> > >Cc: serdev at iptel.org; serusers at iptel.org; users at openser.org;
> > >devel at openser.org
> > >Subject: [Serusers] Re: [Serdev] Inaccurate Radius Accounting
> > >
> > >Hello,
> > >
> > >Called-Station-Id attribute always contains the To URI (not
> > >Request-URI). You can find the outbound Request-URI in
> > >Sip-Translated-Request-URI attribute.
> > >
> > >Even if you rewrite To header field, it will never be accounted in
> > >Called-Station-Id.
> > >
> > > Jan.
> > >
> > >On 15-11-2005 21:59, Lenir Santiago wrote:
> > >
> > >
> > >>Hey guys,
> > >>
> > >>
> > >>
> > >>I'm using Radius to do pretty much everything regarding my users, i.e.
> > >>registrations, authorization, features and preferences. I implemented
my
> > >>
> > >>
> > >own
> > >
> > >
> > >>way of doing speeddial by using AVPs provided by radius and AVPOPs
module,
> > >>Here is the snippet:
> > >>
> > >>
> > >>
> > >>AVP-SIP = speedial:30:15615551212
> > >>
> > >>
> > >>
> > >>               avp_subst("s:caller_speedial/i:99", "/(.*):(.*)/\2/");
> > >>#15615551212
> > >>
> > >>               avp_printf("i:98","$rU:*"); #30
> > >>
> > >>               avp_printf("i:97","sip:$avp($temp2)@$td"); #
> > >>sip:15615551212 at xx.xx.xx.xx
> > >>
> > >>               avp_printf("i:96","<sip:$avp($temp2)@$td>\r\n"); #
> > >><sip:15615551212 at xx.xx.xx.xx>.
> > >>
> > >>               xlog("L_N","    SPEEDIALING: $fU is speed-dialing
> > >>$hdr(To)->$avp($temp2)\n");
> > >>
> > >>               if (avp_check("s:caller_speedial", "fm/$temp1/g")) {
> > >>
> > >>
> > >>
> > >>                       #avp_pushto("$To","i:96");
> > >>
> > >>                       #avp_pushto("$ruri","i:97");
> > >>
> > >>                       #avp_pushto("$duri","i:97");
> > >>
> > >>                       #subst('/^To: (.*)@(.*)/To: "$avp($temp2)"
> > >><$avp($temp2)@\2/');
> > >>
> > >>                       #append_hf("To: \"5615551212\"
> > >><15615551212 at xx.xx.xx.xx>;user=phone");
> > >>
> > >>
> > >>#subst_uri('/^sip:(.*)@(.*)$/sip:$avp($temp2)@\2/i');
> > >>
> > >>                       #subst_user('/(.*)/$avp($temp2)/');
> > >>
> > >>                       #remove_hf("To");
> > >>
> > >>                       rewriteuser("15615551212");
> > >>
> > >>                       xlog("L_N","    SPEEDIALING: $fU is dialing
> > >>
> > >>
> > >$hdr(To)
> > >
> > >
> > >>$avp($temp2)\n");
> > >>
> > >>                       avp_delete("$temp1/g");
> > >>
> > >>                       avp_delete("$temp2/g");
> > >>
> > >>
> > >>
> > >>               };
> > >>
> > >>
> > >>
> > >>In this scenario, im forcing it instead of getting the value from AVPs
> > >>
> > >>
> > >just
> > >
> > >
> > >>for ease of showing my point. The problem that I'm having is that no
> > >>
> > >>
> > >matter
> > >
> > >
> > >>what I do to change the To header or change the R-URI, radius ALWAYS
sends
> > >>the accounting records with the original R-URI, in my case
30 at xx.xx.xx.xx,
> > >>how can I get acc.so to send the final resulting URI
> > >>(15615551212 at xx.xx.xx.xx) in the Called-Station-Id AVP?
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
id=97,
> > >>length=298
> > >>
> > >>       Acct-Status-Type = Start
> > >>
> > >>       Service-Type = Sip-Session
> > >>
> > >>       Acct-Terminate-Cause = 200
> > >>
> > >>       Error-Cause = Invite
> > >>
> > >>       User-Name = "1000 at xx.xx.xx.xx"
> > >>
> > >>       Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
> > >>
> > >>       Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
> > >>
> > >>       Sip-Translated-Request-URI =
> > >>"sip:949449852150#15615551212 at gateway;user=phone"
> > >>
> > >>       Acct-Session-Id =
> > >>
> > >>
> > >"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
> > >
> > >
> > >>       Sip-To-Tag = "230383F4-2AF"
> > >>
> > >>       Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> > >>
> > >>       Sip-CSeq = "102"
> > >>
> > >>       NAS-IP-Address = xx.xx.xx.xx
> > >>
> > >>       NAS-Port = 5060
> > >>
> > >>       Acct-Delay-Time = 0
> > >>
> > >>rlm_sql (sql): Reserving sql socket id: 12
> > >>
> > >>rlm_sql (sql): Released sql socket id: 12
> > >>
> > >>Sending Accounting-Response of id 97 to xx.xx.xx.xx:39216
> > >>
> > >>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
id=98,
> > >>length=292
> > >>
> > >>       Acct-Status-Type = Stop
> > >>
> > >>       Service-Type = Sip-Session
> > >>
> > >>       Acct-Terminate-Cause = 200
> > >>
> > >>       Error-Cause = 8
> > >>
> > >>       User-Name = "1000 at xx.xx.xx.xx"
> > >>
> > >>       Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
> > >>
> > >>       Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
> > >>
> > >>       Sip-Translated-Request-URI =
> > >>"sip:949449852150#15615551212 at gateway:5060"
> > >>
> > >>       Acct-Session-Id =
> > >>
> > >>
> > >"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
> > >
> > >
> > >>       Sip-To-Tag = "230383F4-2AF"
> > >>
> > >>       Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> > >>
> > >>       Sip-CSeq = "103"
> > >>
> > >>       NAS-IP-Address = xx.xx.xx.xx
> > >>
> > >>       NAS-Port = 5060
> > >>
> > >>       Acct-Delay-Time = 0
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>Thanks in advance!
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>Lenir
> > >>_______________________________________________
> > >>Users mailing list
> > >>Users at openser.org
> > >>http://openser.org/cgi-bin/mailman/listinfo/users
> > >>
> > >>
> > >>
>
> _______________________________________________
> Serusers mailing list
> Serusers at iptel.org
> http://mail.iptel.org/mailman/listinfo/serusers





More information about the sr-users mailing list