[Serusers] handling BYE from caller and callee

[Marian Dumitru]

Hi Iqbal,

This can happen when the first BYE (sent by GW) does not tire down the 
call from reasons like:
	- invalid BYE (Route set is not correctly formed)
	- incorrect routing (routing logic on SER doesn't deal properly with RR)
	- message doesn't get to UAS
	- UAS doesn't match (as dialog) the BYE with the current call

Try to find which of these is your case.

Best regards,
Marian

Iqbal wrote:
> Hi
> 
> When llooking at acc table, I see multiple Bye for the same INVITE, one
> can be from my pstn gateway, and the other could be from my UA (eg
> xlite).
> 
> It seems if xlite hands up, I get a BYE, but then when the user at the
> other end also hangs up, if his phone hasnt cutoff bye then, I get
> another BYE, how can I resolve this problem. I'm thinking that the BYE
> from the pstn is a good thing, since that the actual billable time,
> however the pstn will not always send a BYE, if xlite hangs up, and this
> disconnect has been sent to the gateway-->phone.
> 
> Iqbal
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> 

-- 
Voice System
http://www.voice-system.ro