[Serusers] SER + PSTN problem

[Alberto Cruz]

If your Phone1 or/and Phone2 are behind a NAT you should install 
SER+MEDIAPROXY or SER+RTPPROXY.

You could check www.onsip.org for reference.

Regards

Alberto Cruz

Kuti Joe wrote:

>  Hi to all!
>
>   I'm a new seruser, and I have a problem with SER and a PSTN gw what I can't solve.
>   I have got 2 UAs, 1 SER server, 1 Cisco PSTN gw (by the side of the voip provider). 
>   All of them have public IP.
>   
>    Phone1 -------+
>                  | 
>                 SER --- PSTN gw
>                  |
>    Phone2 -------+
>
>   When I call from Phone1 to Phone2 directly, it is working properly.
>   But:
>   If I call from Phone1 to Phone2 via the PSTN gw, then it's ringing out,
>   and when I pick up Phone2 I hear the voice of Phone1, but in Phone1 I
>   can't hear the voice of Phone2.
>   If I call from Phone1 to other telephone numbers, I have the same problem.
>   I would like to proxy the media on the server.
>
>   I'm useing SER 0.8.14. ser.cfg attached
>   Thank you very much for your effort, and sorry for my poor English...
>
>  Regards,
>   KutiJoe
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>  
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050729/66f3b1c0/attachment.htm>