[Serusers] ser.pif file not found

[Sam Lee]

 Alternatively u could do a 'touch /var/run/ser.pid ' before doing
serctl start

-----Original Message-----
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] On
Behalf Of Gary Reuter
Sent: Friday, July 29, 2005 10:21 PM
To: Colin Jordan
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] ser.pif file not found

If you're using serctl to start ser, it should be setting the pid
location properly... but the init.d ser script does not make ser create
the pid file.  The solution I used was to add
  OPTIONS="-P /var/run/ser.pid"
after the RETVAL line in the init.d/ser script.


On 7/29/05, Colin Jordan <cjordan at econetwireless.com> wrote:
>  
> I cannot control SER via serctl stop/start due to the fact that when 
> it runs via this command it is not finding a ser.pid. I have searched 
> for ser.pid on my system and it is not there (was just making sure 
> that serctl was not looking in the wrong spot for the PID file).  Any 
> suggestions??
>  
>

_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers