[Serusers] Problems with ser.cfg (bad command, syntax error)
Steve Blair
blairs at isc.upenn.edu
Tue Jul 5 21:17:37 CEST 2005
Also look at the later line numbers. Sometimes a missing ";" or if-then
construct without any statements in the body will cause these types of
errors too.
Iqbal wrote:
> whats on line 158 column 6 and 7
>
> iqbal
>
> Goran Juric wrote:
>
>> Hi all!
>>
>> I'm trying to set-up user authentification, but it seems like I have
>> some
>> problem with my ser.cfg This is the output I get after runnin "ser -c":
>>
>> -----------------------
>> [root at Linux tmp]# ser -c
>> 0(16552) parse error (158,6-7): syntax error
>> 0(16552) parse error (158,6-7): missing '(' or ')' ?
>> 0(16552) parse error (158,6-7): bad command: missing ';'?
>> 0(16552) parse error (158,7-8): bad command
>> 0(16552) parse error (158,8-9): bad command
>> 0(16552) parse error (159,1-2): bad command
>> 0(16552) parse error (175,1-2): syntax error
>> 0(16552) parse error (175,1-2): bad command
>> 0(16552) parse error (175,1-2): bad command
>> 0(16552) parse error (175,2-3): bad command
>> 0(16552) parse error (175,23-24): syntax error
>> 0(16552) parse error (175,23-24): bad command: missing ';'?
>> 0(16552) parse error (175,23-24): bad command
>> 0(16552) parse error (175,25-26): bad command
>> 0(16552) parse error (178,2-3): syntax error
>> 0(16552) parse error (178,2-3):
>> ERROR: bad config file (16 errors)
>> -----------------------
>>
>> This is my config file:
>> ------------------------------------------------------------
>> #
>> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
>> #
>> # simple quick-start config script
>> #
>>
>> # ----------- global configuration parameters ------------------------
>>
>> #debug=3 # debug level (cmd line: -dddddddddd)
>> #fork=yes
>> #log_stderror=no # (cmd line: -E)
>> #listen=10.29.1.2
>> /* Uncomment these lines to enter debugging mode fork=no
>> log_stderror=yes
>> */
>>
>> check_via=no # (cmd. line: -v)
>> dns=no # (cmd. line: -r)
>> rev_dns=no # (cmd. line: -R)
>> #port=5060
>> children=4
>> fifo="/tmp/ser_fifo"
>> fifo_db_url="mysql://ser:heslo@localhost/ser"
>>
>> # ------------------ module loading ----------------------------------
>>
>> # Uncomment this if you want to use SQL database
>> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>>
>> loadmodule "/usr/local/lib/ser/modules/sl.so"
>> loadmodule "/usr/local/lib/ser/modules/tm.so"
>> loadmodule "/usr/local/lib/ser/modules/rr.so"
>> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>> loadmodule "/usr/local/lib/ser/modules/textops.so"
>>
>> # Uncomment this if you want digest authentication
>> # mysql.so must be loaded !
>> loadmodule "/usr/local/lib/ser/modules/uri_db.so"
>> loadmodule "/usr/local/lib/ser/modules/auth.so"
>> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>> # ----------------- setting module-specific parameters ---------------
>>
>> modparam("auth_db|uri_db|usrloc", "db_url",
>> "mysql://ser:heslo@localhost/ser")
>> modparam("auth_db", "calculate_ha1", yes)
>> modparam("auth_db", "password_column", "password")
>> modparam("usrloc", "db_mode", 2)
>> modparam("rr", "enable_full_lr", 1)
>>
>>
>>
>> # -- usrloc params --
>>
>> #modparam("usrloc", "db_mode", 0)
>>
>> # Uncomment this if you want to use SQL database # for persistent
>> storage and comment the previous line
>> #modparam("usrloc", "db_mode", 2)
>>
>> # -- auth params --
>> # Uncomment if you are using auth module
>> #
>> #modparam("auth_db", "calculate_ha1", yes)
>> #
>> # If you set "calculate_ha1" parameter to yes (which true in this
>> config), # uncomment also the following parameter)
>> #
>> #modparam("auth_db", "password_column", "password")
>>
>> # -- rr params --
>> # add value to ;lr param to make some broken UAs happy
>> #modparam("rr", "enable_full_lr", 1)
>>
>> # ------------------------- request routing logic -------------------
>>
>>
>> ##############################################################
>>
>> route{
>>
>> # initial sanity checks -- messages with
>> # max_forwards==0, or excessively long requests
>> if (!mf_process_maxfwd_header("10")) {
>> sl_send_reply("483","Too Many Hops");
>> break;
>> };
>> if (msg:len >= 2048 ) {
>> sl_send_reply("513", "Message too big");
>> break;
>> };
>>
>>
>> # we record-route all messages -- to make sure that
>> # subsequent messages will go through our proxy; that's
>> # particularly good if upstream and downstream entities
>> # use different transport protocol
>> if (!method=="REGISTER") record_route();
>>
>> # subsequent messages withing a dialog should take the
>> # path determined by record-routing
>> if (loose_route()) {
>> # mark routing logic in request
>> append_hf("P-hint: rr-enforced\r\n"); route(1);
>> break;
>> };
>>
>> if (!uri==myself) {
>> # mark routing logic in request
>> append_hf("P-hint: outbound\r\n"); route(1);
>> break;
>> };
>>
>> # if the request is for other domain use UsrLoc
>> # (in case, it does not work, use the following command
>> # with proper names and addresses in it)
>> if (uri==myself) {
>>
>> if (uri==myself) {
>> if (method=="INVITE") {
>> route(3);
>> break;
>> } else if (method=="REGISTER") {
>> route(2);
>> break;
>> };
>>
>> # Uncomment this if you want to use digest authentication
>> # if (!www_authorize("voip.savica.net", "subscriber"))
>> {
>> # www_challenge("voip.savica.net", "0");
>> # break;
>> # };
>>
>> # save("location");
>> # break;
>> # };
>>
>> lookup("aliases");
>> if (!uri==myself) {
>> append_hf("P-hint: outbound alias\r\n");
>> route(1);
>> break;
>> };
>>
>> # native SIP destinations are handled using our USRLOC DB
>> if (!lookup("location")) {
>> sl_send_reply("404", "User Not Found");
>> break;
>> };
>> };
>> append_hf("P-hint: usrloc applied\r\n"); route(1);
>> }
>>
>> route[1] {
>> # send it out now; use stateful forwarding as it works reliably
>> # even for UDP2TCP
>> if (!t_relay()) {
>> sl_reply_error();
>> };
>> }
>>
>>
>>
>> route[2] {
>>
>> # -----------------------------------------------------------------
>> # REGISTER Message Handler
>> # ----------------------------------------------------------------
>> sl_send_reply("100", "Trying");
>> (!www_authorize("","subscriber")) {
>> www_challenge("","0");
>> break;
>> };
>> if (!check_to()) {
>> sl_send_reply("401", "Unauthorized");
>> break;
>> };
>> consume_credentials();
>> if (!save("location")) {
>> sl_reply_error();
>> };
>> }
>>
>> route[3] {
>> # -----------------------------------------------------------------
>> # INVITE Message Handler
>> # -----------------------------------------------------------------
>> if (!proxy_authorize("","subscriber")) {
>> proxy_challenge("","0");
>> break;
>> } else if (!check_from()) {
>> sl_send_reply("403", "Use From=ID");
>> break;
>> };
>> consume_credentials();
>> lookup("aliases");
>> if (uri!=myself) {
>> route(1);
>> break;
>> };
>> if (!lookup("location")) {
>> sl_send_reply("404", "User Not Found");
>> break;
>> };
>>
>> route(1);
>> }
>> -------------------------------------------------
>>
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>>
>> .
>>
>>
>>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list