[Serusers] Problems with ser.cfg (bad command, syntax error)
Iqbal
iqbal at gigo.co.uk
Tue Jul 5 18:56:48 CEST 2005
whats on line 158 column 6 and 7
iqbal
Goran Juric wrote:
>Hi all!
>
>I'm trying to set-up user authentification, but it seems like I have some
>problem with my ser.cfg This is the output I get after runnin "ser -c":
>
>-----------------------
>[root at Linux tmp]# ser -c
> 0(16552) parse error (158,6-7): syntax error
> 0(16552) parse error (158,6-7): missing '(' or ')' ?
> 0(16552) parse error (158,6-7): bad command: missing ';'?
> 0(16552) parse error (158,7-8): bad command
> 0(16552) parse error (158,8-9): bad command
> 0(16552) parse error (159,1-2): bad command
> 0(16552) parse error (175,1-2): syntax error
> 0(16552) parse error (175,1-2): bad command
> 0(16552) parse error (175,1-2): bad command
> 0(16552) parse error (175,2-3): bad command
> 0(16552) parse error (175,23-24): syntax error
> 0(16552) parse error (175,23-24): bad command: missing ';'?
> 0(16552) parse error (175,23-24): bad command
> 0(16552) parse error (175,25-26): bad command
> 0(16552) parse error (178,2-3): syntax error
> 0(16552) parse error (178,2-3):
>ERROR: bad config file (16 errors)
>-----------------------
>
>This is my config file:
>------------------------------------------------------------
>#
># $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
>#
># simple quick-start config script
>#
>
># ----------- global configuration parameters ------------------------
>
>#debug=3 # debug level (cmd line: -dddddddddd)
>#fork=yes
>#log_stderror=no # (cmd line: -E)
>#listen=10.29.1.2
>/* Uncomment these lines to enter debugging mode
>fork=no
>log_stderror=yes
>*/
>
>check_via=no # (cmd. line: -v)
>dns=no # (cmd. line: -r)
>rev_dns=no # (cmd. line: -R)
>#port=5060
>children=4
>fifo="/tmp/ser_fifo"
>fifo_db_url="mysql://ser:heslo@localhost/ser"
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/local/lib/ser/modules/sl.so"
>loadmodule "/usr/local/lib/ser/modules/tm.so"
>loadmodule "/usr/local/lib/ser/modules/rr.so"
>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>loadmodule "/usr/local/lib/ser/modules/registrar.so"
>loadmodule "/usr/local/lib/ser/modules/textops.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/local/lib/ser/modules/uri_db.so"
>loadmodule "/usr/local/lib/ser/modules/auth.so"
>loadmodule "/usr/local/lib/ser/modules/auth_db.so"
># ----------------- setting module-specific parameters ---------------
>
>modparam("auth_db|uri_db|usrloc", "db_url",
>"mysql://ser:heslo@localhost/ser")
>modparam("auth_db", "calculate_ha1", yes)
>modparam("auth_db", "password_column", "password")
>modparam("usrloc", "db_mode", 2)
>modparam("rr", "enable_full_lr", 1)
>
>
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode", 0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous line
>#modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>#
>#modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this config),
># uncomment also the following parameter)
>#
>#modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>#modparam("rr", "enable_full_lr", 1)
>
># ------------------------- request routing logic -------------------
>
>
>##############################################################
>
>route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (msg:len >= 2048 ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> if (!method=="REGISTER") record_route();
>
> # subsequent messages withing a dialog should take the
> # path determined by record-routing
> if (loose_route()) {
> # mark routing logic in request
> append_hf("P-hint: rr-enforced\r\n");
> route(1);
> break;
> };
>
> if (!uri==myself) {
> # mark routing logic in request
> append_hf("P-hint: outbound\r\n");
> route(1);
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
>if (uri==myself) {
>if (method=="INVITE") {
>route(3);
>break;
>} else if (method=="REGISTER") {
> route(2);
> break;
> };
>
># Uncomment this if you want to use digest authentication
># if (!www_authorize("voip.savica.net", "subscriber"))
>{
># www_challenge("voip.savica.net", "0");
># break;
># };
>
># save("location");
># break;
># };
>
> lookup("aliases");
> if (!uri==myself) {
> append_hf("P-hint: outbound alias\r\n");
> route(1);
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "User Not Found");
> break;
> };
> };
> append_hf("P-hint: usrloc applied\r\n");
> route(1);
>}
>
>route[1]
>{
> # send it out now; use stateful forwarding as it works reliably
> # even for UDP2TCP
> if (!t_relay()) {
> sl_reply_error();
> };
>}
>
>
>
>route[2] {
>
># -----------------------------------------------------------------
># REGISTER Message Handler
># ----------------------------------------------------------------
>sl_send_reply("100", "Trying");
>(!www_authorize("","subscriber")) {
>www_challenge("","0");
>break;
>};
>if (!check_to()) {
>sl_send_reply("401", "Unauthorized");
>break;
>};
>consume_credentials();
>if (!save("location")) {
>sl_reply_error();
>};
>}
>
>route[3] {
># -----------------------------------------------------------------
># INVITE Message Handler
># -----------------------------------------------------------------
>if (!proxy_authorize("","subscriber")) {
>proxy_challenge("","0");
>break;
>} else if (!check_from()) {
>sl_send_reply("403", "Use From=ID");
>break;
>};
>consume_credentials();
>lookup("aliases");
>if (uri!=myself) {
>route(1);
>break;
>};
>if (!lookup("location")) {
>sl_send_reply("404", "User Not Found");
>break;
> };
>
> route(1);
> }
>-------------------------------------------------
>
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>.
>
>
>
More information about the sr-users
mailing list