[Serusers] forwarding to pstn

[Iqbal]

what is sip debug on asterisk showing

Iqbal

On 2/24/2005, "harry gaillac" <gaillacharry at yahoo.fr> wrote:

>Hi all,
>
>I set up ser + asterisk.
>Asterisk is registred as gateway at home.net and listen
>port  5070 (same box).
>two hard phones are registred as bob at home.net and
>alice at home.net .
>
>from alice or bob i want to call 01013 to PSTN without
>success.
>ser lookup location and aliases and so reply not found
>thought i set forward ?
>
>Thanks for your help
>Harry
># ----------- global configuration parameters
>------------------------
>
>debug=5         # debug level (cmd line: -dddddddddd)
>fork=yes
>log_stderror=no		# (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode 
>#debug=7
>#fork=no
>#log_stderror=yes
>*/
>
>check_via=no	# (cmd. line: -v)
>dns= no          # (cmd. line: -r)
>rev_dns=no      # (cmd. line: -R)
>listen=192.168.0.1
>alias="home.net"
>#alias="192.168.0.1"
>port=5060
>children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading
>----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/lib/ser/modules/sl.so"
>loadmodule "/usr/lib/ser/modules/tm.so"
>loadmodule "/usr/lib/ser/modules/rr.so"
>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/lib/ser/modules/usrloc.so"
>loadmodule "/usr/lib/ser/modules/registrar.so"
>loadmodule "/usr/lib/ser/modules/group.so"
>loadmodule "/usr/lib/ser/modules/uri.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/lib/ser/modules/auth.so"
>loadmodule "/usr/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters
>---------------
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode", 0)
>
># Uncomment this if you want to use SQL database 
># for persistent storage and comment the previous line
>modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>#
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which
>true in this config), 
># uncomment also the following parameter)
>#
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
># -------------------------  request routing logic
>-------------------
>
># main routing logic
>
>route{
>
>	# initial sanity checks -- messages with
>	# max_forwards==0, or excessively long requests
>	if (!mf_process_maxfwd_header("15")) {
>		sl_send_reply("483","Too Many Hops");
>		break;
>	};
>	if ( msg:len > max_len ) {
>		sl_send_reply("513", "Message too big");
>		break;
>	};
>
>	# we record-route all messages -- to make sure that
>	# subsequent messages will go through our proxy;
>that's
>	# particularly good if upstream and downstream
>entities
>	# use different transport protocol
>	record_route();	
>	# loose-route processing
>	if (loose_route()) {
>		t_relay();
>		break;
>	};
>	
>		
>
>	# if the request is for other domain use UsrLoc
>	# (in case, it does not work, use the following
>command
>	# with proper names and addresses in it)
>	if (uri==myself) {
>
>		if (method=="REGISTER") {
>
>	# Uncomment this if you want to use digest
>authentication
>			if (!www_authorize("home.net", "subscriber")) {
>				www_challenge("home.net", "0");
>				break;
>			};
>
>			save("location");
>			break;
>		};
>
>
>		# native SIP destinations are handled using our
>USRLOC DB or ALIASES 
>		if (!lookup("location") | !lookup("aliases")) {
>			sl_send_reply("404", "Not Found");
>			break;
>		};
>
>	} else {
>
>			t_relay();
>		};
>
>	# forward to current uri now; use stateful
>forwarding; that
>	# works reliably even if we forward from TCP to UDP
>	if (!t_relay()) {
>		sl_reply_error();
>
>	};
>	# forward to PSTN
>	if (uri=~"sip:01013 at home.net") {
>		if (method=="INVITE") { 
>			route(1);
>			break;
>		};
>	};
>
>}
>
>route[1] {
>
>	# forward to PSTN
>	if (uri=~"sip:01013 at home.net") {
>		if (method=="INVITE") { 
>			forward(192.168.0.1, 5070);
>			break;
>		};			
>	};			
>
>}
>
>
>
>
>
>	
>
>	
>		
>Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de
>stockage pour vos mails ! 
>Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
>
>
>	
>
>	
>		
>Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! 
>Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>