[Serusers] forwarding to pstn

[harry gaillac]

Hi all,

I set up ser + asterisk.
Asterisk is registred as gateway at home.net and listen
port  5070 (same box).
two hard phones are registred as bob at home.net and
alice at home.net .

from alice or bob i want to call 01013 to PSTN without
success.
ser lookup location and aliases and so reply not found
thought i set forward ?

Thanks for your help
Harry
# ----------- global configuration parameters
------------------------

debug=5         # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no		# (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
#debug=7
#fork=no
#log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns= no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=192.168.0.1
alias="home.net"
#alias="192.168.0.1"
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading
----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/group.so"
loadmodule "/usr/lib/ser/modules/uri.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters
---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic
-------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("15")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy;
that's
	# particularly good if upstream and downstream
entities
	# use different transport protocol
	record_route();	
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};
	
		

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following
command
	# with proper names and addresses in it)
	if (uri==myself) {

		if (method=="REGISTER") {

	# Uncomment this if you want to use digest
authentication
			if (!www_authorize("home.net", "subscriber")) {
				www_challenge("home.net", "0");
				break;
			};

			save("location");
			break;
		};


		# native SIP destinations are handled using our
USRLOC DB or ALIASES 
		if (!lookup("location") | !lookup("aliases")) {
			sl_send_reply("404", "Not Found");
			break;
		};

	} else {

			t_relay();
		};

	# forward to current uri now; use stateful
forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();

	};
	# forward to PSTN
	if (uri=~"sip:01013 at home.net") {
		if (method=="INVITE") { 
			route(1);
			break;
		};
	};

}

route[1] {

	# forward to PSTN
	if (uri=~"sip:01013 at home.net") {
		if (method=="INVITE") { 
			forward(192.168.0.1, 5070);
			break;
		};			
	};			

}





	

	
		
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de
stockage pour vos mails ! 
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/


	

	
		
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! 
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/