[Serusers] Can't run SER with radius

[Charles Wang]

Just download the source code and type "make" under ser/modules/auth_radius/
Then copy the auth_radius.so to /usr/local/lib/ser/modules/
Re-run your serctl.
Make sure you have to install radiusclient package first before compile it.

Charles


On Thu, 17 Feb 2005 16:44:16 +0200, Roman <leroi at navigator.lv> wrote:
> Sorry forgot syslog messages:
> 
> Feb 17 16:37:41 uranus ser: ERROR: load_module: could not open module
> </usr/local/lib/ser/modules/auth_radius.so>: /usr/local/lib/ser/modules/auth_radius.so:
> undefined symbol: rc_dict_findvend
> Feb 17 16:37:41 uranus ser: parse error (36,13-55): failed to load module
> Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module matching
> auth_radius found |
> Feb 17 16:37:41 uranus ser: parse error (44,78-79): Can't set module parameter
> Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module matching
> auth_radius found |
> Feb 17 16:37:41 uranus ser: parse error (45,43-44): Can't set module parameter
> Feb 17 16:37:41 uranus ser: parse error (93,32-33): unknown command, missing
> loadmodule?
> 
> 
> On Wednesday 16 February 2005 20:45, Roman wrote:
> > Anybody please help with subj
> > 0.8.14 binaries from iptel.org
> > ser -dddddddd says:
> > ERROR: bad config file (4 errors)
> >
> > config as in the manual:
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=5         # debug level (cmd line: -dddddddddd)
> > #fork=yes
> > #log_stderror=no        # (cmd line: -E)
> >
> > /* Uncomment these lines to enter debugging mode
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no    # (cmd. line: -v)
> > dns=no           # (cmd. line: -r)
> > rev_dns=no      # (cmd. line: -R)
> > port=5065
> > #children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading ----------------------------------
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> > modparam("usrloc", "db_mode", 2)
> >
> > # -- auth params --
> > modparam("auth_radius",
> > "radius_config","/etc/radiusclient/radiusclient.conf")
> > modparam("auth_radius", "service_type", 15)
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> >
> > #modparam("acc", "log_level", 1)
> > #modparam("acc", "radius_flag", 1)
> >
> > # -------------------------  request routing logic -------------------
> > # main routing logic
> >
> >
> > route{
> >
> >         # initial sanity checks -- messages with
> >         # max_forwards==0, or excessively long requests
> >         if (!mf_process_maxfwd_header("10")) {
> >                 sl_send_reply("483","Too Many Hops");
> >                 break;
> >         };
> >         if ( msg:len > max_len ) {
> >                 sl_send_reply("513", "Message too big");
> >                 break;
> >         };
> >
> >         # we record-route all messages -- to make sure that
> >         # subsequent messages will go through our proxy; that's
> >         # particularly good if upstream and downstream entities
> >         # use different transport protocol
> >         record_route();
> >         # loose-route processing
> >         if (loose_route()) {
> >                 t_relay();
> >                 break;
> >         };
> >
> >         # if the request is for other domain use UsrLoc
> >         # (in case, it does not work, use the following command
> >         # with proper names and addresses in it)
> >         if (uri==myself) {
> >
> >                 if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> >                         if (!radius_www_authorize("")) {
> >                                 www_challenge("", "1");
> >                                 break;
> >                         };
> >
> >                         save("location");
> >                         break;
> >                 };
> >
> >                 # native SIP destinations are handled using our USRLOC DB
> >                 if (!lookup("location")) {
> >                         sl_send_reply("404", "Not Found");
> >                         break;
> >                 };
> >         };
> >         # forward to current uri now; use stateful forwarding; that
> >         # works reliably even if we forward from TCP to UDP
> >         if (!t_relay()) {
> >                 sl_reply_error();
> >         };
> >
> > }
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> 
> --
> Please avoid sending me Word or PowerPoint attachments.
> See http://www.fsf.org/philosophy/no-word-attachments.html
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>