[Serusers] Radius Authentication Problem
Marian Dumitru
marian.dumitru at voice-sistem.ro
Fri Feb 4 20:22:47 CET 2005
Hi there,
Most probably the path to the radius client config file is wrong or you
don't have read permission.
Best regards,
Marian
M.V. Jaga Mohan wrote:
> Hi List,
> I have downloaded freeradius 0.9.1 and SER-0.8.14
> source and radiusclient library version 0.4.2.
> compiled all of them and my radius is working well as
> I have tested with Radtest. I have compiled SER with
> radius module and I have got auth_radius.so also. But
> when I am trying to run ser I am getting error called
> :
> init_mod() : Error while initializing module.
> Kindly help me in this regard. Its very urgent.
> Below I have provided the debug log.
>
> 0(3672) WARNING: could not rev. resolve 192.168.5.1
> Listening on
> 127.0.0.1 [127.0.0.1]:5060
> 192.168.5.1 [192.168.5.1]:5060
> Aliases: localhost:5060 localhost.localdomain:5060
> WARNING: no fork mode and more than one listen
> address found (will use only
> the the first one)
> 0(3672) DEBUG: init_mod: sl_module
> stateless - initializing
> 0(3672) DEBUG: register_fifo_cmd: new command
> (sl_stats) registered
> 0(3672) DEBUG: MD5 calculated:
> b27e1a1d33761e85846fc98f5f3a7e58
> 0(3672) DEBUG: init_mod: tm
> 0(3672) TM - initializing...
> 0(3672) Call-ID initialization: '7fbeafda'
> 0(3672) DEBUG: register_fifo_cmd: new command
> (t_uac_dlg) registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (t_uac_cancel) registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (t_hash) registered
> 0(3672) DEBUG: lock_initialize: lock initialization
> started
> 0(3672) DEBUG: register_fifo_cmd: new command
> (t_stats) registered
> 0(3672) DEBUG: MD5 calculated:
> 533cb9e91f4b999cf76861cbb9ed54ed
> 0(3672) DEBUG: MD5 calculated:
> a6a1c5f60faecf035a1ae5b6e96e979a
> 0(3672) DEBUG: init_mod: rr
> 0(3672) rr - initializing
> 0(3672) DEBUG: init_mod: maxfwd_module
> Maxfwd module- initializing
> 0(3672) DEBUG: init_mod: usrloc
> 0(3672) usrloc - initializing
> 0(3672) DEBUG: register_fifo_cmd: new command
> (ul_stats) registered
> 0(3672) DEBUG: register_fifo_cmd: new command (ul_rm)
> registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (ul_rm_contact) registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (ul_dump) registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (ul_flush) registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (ul_add) registered
> 0(3672) DEBUG: register_fifo_cmd: new command
> (ul_show_contact) registered
> 0(3672) DEBUG: init_mod: registrar
> 0(3672) registrar - initializing
> 0(3672) find_export: found <sl_send_reply> in module
> sl_module [/usr/local/lib/ser/modules/sl.so]
> 0(3672) find_export: found <ul_bind_usrloc> in module
> usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_register_udomain> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_get_all_ucontacts> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_insert_urecord> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_delete_urecord> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_get_urecord> in module
> usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_lock_udomain> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_unlock_udomain> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_release_urecord> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_insert_ucontact> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_delete_ucontact> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_get_ucontact> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) find_export: found <ul_update_ucontact> in
> module usrloc [/usr/local/lib/ser/modules/usrloc.so]
> 0(3672) DEBUG: init_mod: auth
> 0(3672) auth module - initializing
> 0(3672) find_export: found <sl_send_reply> in module
> sl_module [/usr/local/lib/ser/modules/sl.so]
> 0(3672) DEBUG: init_mod: auth_radius
> 0(3672) auth_radius - Initializing
> 0(3672) auth_radius: Error opening configuration file
> 0(3672) init_mod(): Error while initializing module
> auth_radius
> ERROR: error while initializing modules
> 0(3672) DEBUG: tm_shutdown : start
> 0(3672) DEBUG: tm_shutdown : empting DELETE list
> 0(3672) DEBUG: tm_shutdown : empting hash table
> 0(3672) DEBUG: tm_shutdown: releasing timers
> 0(3672) DEBUG: tm_shutdown : removing semaphores
> 0(3672) DEBUG: tm_shutdown : done
> 0(3672) shm_mem_destroy
> 0(3672) destroying the shared memory lock
>
>
>
> and My ser.conf file is like :
>
> # ----------- global configuration parameters
> ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> #Uncomment these lines to enter debugging mode
> debug=9
> fork=no
> log_stderror=yes
>
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading
> ----------------------------------
>
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> # ----------------- setting module-specific parameters
> ---------------
>
> # -- usrloc params --
>
> #modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which
> true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
>
> modparam("auth_radius", "radius_config",
> "/usr/local/etc/radiusclient/radiusclient.conf")
>
> #modparam("auth_radius", "service_type", 15);
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # ------------------------- request routing logic
> -------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy;
> that's
> # particularly good if upstream and downstream
> entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following
> command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest
> authentication
> if (!radius_www_authorize("192.168.5.1")) {
> www_challenge("192.168.5.1","0");
> break;
> };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our
> USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful
> forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
>
>
> =====
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
--
Voice System
http://www.voice-system.ro
More information about the sr-users
mailing list